Collar Sample Clauses
A Collar clause sets both an upper and lower limit on a variable financial metric, such as an interest rate or commodity price, within a contract. In practice, this means that the value in question cannot rise above the specified cap or fall below the specified floor during the contract term. For example, in a loan agreement, a collar might ensure that the interest rate paid by the borrower will not exceed 7% or drop below 3%, regardless of market fluctuations. The core function of a Collar clause is to provide predictability and risk management for both parties by limiting exposure to extreme changes in the underlying metric.
POPULAR SAMPLE Copied 43 times
Collar. Stand up collar style with zipper closure to top of collar. The collar consists of two layers of self-fabric and two layers of fusible tricot for reinforcement and structural integrity. The inner collar-joining seam will be clean finished to protect the wearer’s neck from a rough seam edge. The collar will lay flat and be shaped to the neck without gapping or puckering. When turned up the collar will comfortably fit around the wearer’s neck and come short of the chin. There shall be a 2” by 3/8” hanger loop attached to the back of the collar and a garment label on the inside collar.
Collar. Same style and dimensions as sample on display. Collar height at real 1 7/8”. Under collar to be of 50% wool/50% rayon. Sewn eyelets for dual pin collar brass. Coat back shall be constructed to allow wearer forward arm movement, extra arm movement and extra arm lift without restriction and shall have a “Memory Recovery” feature to insure coat will return to original shape when wearer is in rest position in the for of a bi-swing back. High quality elastic to withstand long-term dry cleaning must be used for “Memory Recovery” feature. Edges to be single stitched 3/16”. Plain seams, pressed open. Shoulder pads shall be constructed of the finest quality cotton wadding and shall be covered top and bottom with a non-woven moisture resistant covering with zigzag stitching to hold the wadding firmly in place. Shoulder pads and sleeveheads are to be attached securely to the coat canvas, the shoulder and the armhole. A sweat shield of the same cloth as in the body of the coat, piped with Rayon to be securely set under each arm over the lining.
Collar. There shall be a sport style collar with zipper extending to the top. The collar shall be made of two layers of shell fabric and one of non-woven interlining with a 1" by 8" strip of crosswalk reflective centered on back of collar. Collar zipper opening shall measure 14”. The collar and stand will lay flat and be shaped to the neck without gapping or puckering. The collar will comfortably fit around the wearer’s neck and come short of the chin. There shall be a 2” by 3/8” hanger loop attached to the back of the collar and a garment label on the inside collar.
Collar. Notwithstanding Sections 3.2, 3.3, 3.4 or 3.5 hereof, in ------ the event the price per share of Common Stock as so calculated would be less than $2.00, the price per share in any event shall be deemed to be $2.00; and in the event the price per share of Common Stock as so calculated would be more than $4.00, the price per share in any event shall be deemed to be $4.00.
Collar. In no event shall the number of shares of SWC Common Stock delivered to RTNT to purchase all of RTNT's remaining shares of Company Common Stock under this Section 4.3 be less than 240,000 nor more than 450,000.
Collar. Contract where the buyer is guaranteed a maximum price and the seller a minimum price. These transactions are supported by purchase and sale of options positions. A Costless Collar is where buying and selling respectively the related Call and Put are used to finance the Collar.
Collar. The 3" split collar shall consist of two-piece construction shaped for comfort. The collar shall be configured such that when the collar is raised it shall remain standing while providing continuous thermal and moisture protection around the neck and face. To ensure this protection, the two layers of outer shell collar shall be fully lined with a layer of moisture barrier. The shell collar shall provide proper interface with the liner to insure no moisture penetration through the collar seam to the inside of coat. The shell collar shall have multiple pieces ¾” hook along top edge for liner attachment. The liner collar shall be a layer of self-material and a layer of moisture barrier. The design shall be compatible with the outer shell so that the liner does not buckle, pull, or otherwise restrict body motion. The left and right fronts of the liner collar shall be attached to the facings at the front closure of the outer shell. The neck of the liner collar shall be secured to the neck of the outer shell collar such that when donning the coat an arm may not be accidentally caught between the outer shell and its inner linings. ☐ COMPLIANT ☐ EXCEPTION
Collar. Contract where the buyer is guaranteed a maximum price and the seller a minimum price. These transactions are supported by purchase and sale of options positions. A Costless Collar is where buying and selling respectively the related Call and Put are used to finance the Collar. Downside Protection: Contract designed to allow the customer to benefit from declining market prices. ▇▇▇▇▇▇▇ generally completes an option transaction(s) to limit the risk associated with this offering. E-commerce Contract offered by Oil Marketing whereby the customer purchases oil either on a prompt or forward basis via an electronic platform. EFP * A transaction in which two parties agree to exchange a specified amount of futures contracts for the same physical quantity of commodities, with the price of the commodities determined by reference to the market price of the futures.
Collar. The collar is a cylindrical part, with an internal conical-shaped surface. The internal surface matches the outer surface of the intermediate component, shown in Figure 7. A manufacturing drawing of this part is shown in Figure 14. The finished component is shown in Figure 15.
Collar. The collar shc:1II be of layered construction, consisting of a layer of waterproof moisture barrier and a layer of NFPA 1971-certified insulating material, sandwiched between two (2) layers of specified outer shell material. NFPA compliant collars shall be at least 3 inches (7.6 cm) high while CGSB compliant collars shall be at least 4 inches (10.2 cm) high. The design shall incorporate in its patterning a natural contour that will allow proper fit and performance in the standing (upright) or stowed position. There shall be vertical or horizontal seams or stitching in the body of the collar. The left outside of the collar shall have a sewn piece of 2-inch x 2-inch (5.0-cm x 5.0-cm) hook fastener tape for chinstrap-to-collar closure. The fastener tape shall be located rear ▇▇▇▇ far eugh to allow for the location of a forward mounted microphone tab if so desired. Each collar shall be graded to individual coat sizes. The chinstrap shall be of layered construction identical to that of the collar configuration described in the previous paragraphs. Chinstrap shall be of a cescent shaped design with minimum dimensions of: 9 inches (22.5 cm) long across the top corners, 10.5 inches (26 cm) long across the bottom corners, and 3.5 inches (8.75 cm) in vertical height, measured at the center. The leading underside edge of the chinstrap shall have a 4.0-inch-wide (3.8 cm-wide) horizontal strip of loop fastener tape to ensure an adequately adjustable closure and to ensure passage of the Whole Garment Liquid Penetration Test. An 80-pound (36.3 kg) tear strength hang-up loop shall be provided at the interior collar seam. The loop shall be constructed of triple layers of the specified outer shell material, lockstitched to the coat. Webbing is t acceptable.