Comprehensive Development Plans Clause Samples

The Comprehensive Development Plans clause requires parties to create and adhere to detailed, overarching plans that outline the scope, timeline, and key milestones for a development project. Typically, this clause mandates the submission and approval of a plan that covers all phases of the project, including design, construction, and delivery, and may specify requirements for updates or modifications as the project progresses. Its core function is to ensure that all parties have a clear, shared understanding of project expectations and deliverables, thereby reducing the risk of misunderstandings and disputes during the development process.
Comprehensive Development Plans. Existing plans developed by local jurisdictions that serve as the basis for zoning and other land use regulations and ordinances. The Stormwater Management Policies are to be incorporated into the respective Comprehensive Development Plans.
View SourceView Similar (7)
Comprehensive Development Plans. (a) All development in an area where the Council has granted consent to a Comprehensive Development Plan shall comply with the terms of that consent.
View SourceView Similar (2)
Comprehensive Development Plans. (a) The Medium-Density Residential Area is divided into a number of Comprehensive Development Plan Areas (as shown in Figure 25H(3)). (b) Development (except where identified in (b) below) in the Medium-Density Residential Area can only occur once a resource consent for a Comprehensive Development Plan for the entire Comprehensive Development Area has been granted by Council. (c) There are some activities that can occur as Permitted Activities with or without an approved Comprehensive Development Plan, subject to compliance with relevant standards in Rule 25H.7.5 Rule 4.6. These are: i. Maintenance, repair and minor alterations or additions to existing buildings (except scheduled heritage buildings). ii. Informal recreation and ancillary buildings. iii. Residential activities. iv. Temporary activities. v. Demolition or removal of existing buildings (except scheduled heritage buildings). (a) If development is to be staged this must have been approved as part of the resource consent application for the Comprehensive Development Plan. (b) Unless otherwise stated, a Comprehensive Development Plan for each area identified requires resource consent as a restricted discretionary activity. (c) The activity status of Comprehensive Development Plan applications will be classed as discretionary if one or more activities fail to meet one or more standards in Rule 25H.7.5. (d) The activity status of a Comprehensive Development Plan application will be classified as non-complying if one or more activities that form part of the application: i. Are identified as a non-complying activity in the Activity Status Table (refer to Rule 25H.7.2) (a) In the absence of an approved Comprehensive Development Plan, all other activities listed in Table 25H.7.2 are non-complying activities unless the activity is listed as permitted in 25H.7.3.2c.
View SourceView Similar (2)

Related to Comprehensive Development Plans

  • Comprehensive Evaluation The Comprehensive evaluation is a growth-oriented, teacher/evaluator collaborative process that requires teachers to be evaluated on the eight (8) state criteria. A teacher must complete a Comprehensive evaluation once every six (6) years. Subsequent years they will be evaluated on a Focused evaluation, unless they have received a Basic or Unsatisfactory rating on their final comprehensive summative evaluation. Then they shall continue using the Comprehensive evaluation for the following year. All teachers during their provisional status must be on the Comprehensive evaluation.

  • Development Plans Customer has provided Provider with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the applicable Development Period. The information contained in the Current Development Plan is, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, production, processing, treating, marketing and other activities that Customer expects to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period. Customer and Provider shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Customer shall provide (or cause to be provided) to Provider a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). (b) Each proposed Development Plan shall include information as to the following, in each case, broken out, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) forward-looking production estimates for the applicable time period covered by such Development Plan for all Customer Gas and Customer Injected NGLs (A) that Customer reasonably and in good faith believes will become owned or Controlled by Customer during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all ▇▇▇▇▇ then-existing and (II) in the aggregate, all ▇▇▇▇▇ that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well” and, such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (ii) (A) each new receipt point (including the location thereof) proposed by Customer with respect to the Dedicated Production Estimate reflected in such Development Plan (each such receipt point, a “Planned Receipt Point”), (B) each Receipt Point at which Customer expects to Tender Customer Gas or Customer Injected NGLs reflected in such Development Plan into the TGP System, and (C) the estimated portion of the Dedicated Production Estimate contained in such Development Plan that Customer expects to Tender at each such Receipt Point and Planned Receipt Point; (iii) (A) each new delivery point (including the location thereof) proposed by Customer with respect to the Dedication Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Customer expects to Nominate Customer Residue Gas or Customer NGLs produced from the Dedicated Production Estimate reflected in such Development Plan to be redelivered to Customer, and (C) the estimated volumes of Customer Residue Gas and Customer NGLs produced from the Dedication Production Estimate contained in such Development Plan that Customer expects to Nominate to each such Delivery Point; (iv) the earliest date on which each Planned Receipt Point and Planned Delivery Point included in the Development Plan is required by Customer to be placed into service, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Receipt Point or Planned Delivery Point was delivered to Provider hereunder; (v) the anticipated characteristics of the production from the ▇▇▇▇▇ and Planned ▇▇▇▇▇ reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Customer may utilize the existing and historical production information from similarly situated ▇▇▇▇▇; (vi) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Customer proposes to be a Dedicated Contract; and (vii) other information reasonably requested by Provider that is relevant to the design, construction, and operation of the TGP System, including (A) any applicable Plant Expansion or Facilities Modification proposed by Customer, (B) the relevant Receipt Point and Planned Receipt Point facilities applicable to such Development Plan, and (C) the relevant Delivery Point and Planned Delivery Point facilities applicable to such Development Plan. TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).

  • Comprehensive general liability and property damage insurance, insuring against all liability of the Contractor related to this Agreement, with a minimum combined single limit of One Million Dollars ($1,000,000.00) per occurrence, One Million Dollars ($1,000,000) Personal & Advertising Injury, Two Million Dollars ($2,000,000) Products/Completed Operations Aggregate, and Two Million Dollars ($2,000,000) general aggregate;

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Contract Area, including its abandonment.

  • Improvement Plans A professional improvement plan is a clearly articulated assistance program for a teacher whose student growth measure dimension of the evaluation is below the expected level of student growth. For the purposes of this agreement, improvement plans shall be based on the individual student growth measure level, and not for overall subjects or classes taught.