Connectors Sample Clauses
The 'Connectors' clause defines the requirements and specifications for the types of connectors to be used in a particular project or agreement. It typically outlines the technical standards, compatibility requirements, and sometimes the approved manufacturers or models for connectors that must be used to ensure proper integration between components. For example, it may require that all electrical connectors meet certain safety certifications or that data connectors are compatible with specified equipment. This clause ensures that all parties use compatible and reliable connectors, thereby reducing the risk of technical failures and ensuring seamless operation of interconnected systems.
Connectors. A license purchased for this Licensed Software allows use of such software in any quantity solely in conjunction with TeamAnalytics that is licensed and ordered separately.
Connectors. (a) Maximum Unitary ODF/S Connector (1 connector + 1 adapter + 1 connector)
(b) Maximum Connector/pigtail loss. The attenuation contribution of each pigtail with associated connector is considered to be 1.0 dB, comprised of 0.8 dB connector loss and 0.20 dB splice loss (pigtail to cable splice).
Connectors. Customer may (if Customer’s subscription includes one or more Connectors) use Connectors to integrate the Subscription Service with Customer’s accounts or subscriptions to third-party services or applications. In such case, Customer Users may transfer information between the Subscription Service and such third-party services or applications via the Connectors, resulting in the modification of Customer Content or the content and information stored in Customer’s third-party services or applications. Smartsheet will have no liability for modification or deletion of Customer Content or data in third-party services or applications through use of a Connector by a Customer User.
Connectors. A. Must be Teflon filled, UHF or N type, including chassis/bulkhead connectors. B. Must be properly fabricated (soldered if applicable) if field installed. C. Must be taped and Scotchkoted or equivalent at least 4" onto jacket if exposed to weather. D. Male pins must be of proper length according to manufacturer's specifications. E. Female contacts may not be spread. F. Connectors must be pliers tight as opposed to hand tight. G. Must be silver plated or brass. H. Must be electrically and mechanically equivalent to Original Equipment Manufacturers (OEM) connectors.
Connectors. The loadability of connectors and splices must meet or exceed the loadability of the conductors for which they are sized. The individual owners are to confirm, with the manufacturers involved, that the connectors and splices, when installed in accordance with the methods actually used in each case, may be loaded safely to the proposed line terminal ratings, without exceeding the maximum allowable temperature limits of the conductors.
Connectors. Connectors (including the vehicle inlet) are deemed to meet this requirement if:
(a) They comply with 5.1.1.1. and 5.
Connectors. Fuse change (all sizes)
Connectors. This section defines methods of connecting cable between electrical systems and equipment. In this section, the term "
Connectors. There may be plugins or APIs that enable the Hosted Services to interoperate with third party products or services (each, a “Connector”). Customer acknowledges and agrees that such Connectors are not part of the Hosted Services, and that Entrust grants no rights, warranties or support for any Connectors or for the interoperability of the Hosted Services with such Connectors under this ECSS Schedule. If Customer uses any Connector, Customer has exclusive responsibility to ensure that it has any and all requisite rights to use the Connector, including using it to transfer any data from or to the Hosted Services, and to use the product or service with which it connects. The use of a Connector does not create any data subprocessor relationship between Entrust and any third party.
Connectors. At least 33% of Level 2 connectors at each project site must be SAE J1772 connectors, and at least 33% of DCFC connectors at each project site must be CCS1 connectors. Connector types other than SAE J1772, CCS1, and NACS may be installed at project sites, but are not factored into the grant award amount.