Continued Airworthiness Sample Clauses

Continued Airworthiness. 3.3.1. The Technical Agents are committed to take action to address unsafe conditions in products that they have certificated. The Technical Agents shall exchange information on failures, malfunctions and defects received from its approval holders to support the other Technical Agent's investigation of service difficulties or other potential safety issues. The exchange of this information between the Technical Agents shall be considered to fulfil the obligation of each approval holder to report failures, malfunctions, and defects to the other Party's Technical Agent under that other Party's applicable law. Actions to address unsafe conditions and exchange of safety information shall be defined in the technical implementation procedures. 3.3.2. Unless otherwise notified by either Party's Technical Agent: (a) The FAA shall carry out the continued airworthiness State of Design functions applicable to the United States under Annex 8 of the Chicago Convention for aircraft, aircraft engines, propellers and appliances for the life cycle of the product. (b) EASA shall carry out on behalf of the EU Member States the continued airworthiness State of Design functions applicable to them under Annex 8 of the Chicago Convention for aircraft, aircraft engines, propellers and appliances for the life cycle of the product. 3.3.3. The FAA shall exercise the State of Manufacture functions applicable to the United States under Annex 8 to the Chicago Convention for aircraft, aircraft engines, propellers and appliances for the life cycle of the product over which it has jurisdiction. The Aviation Authorities and, where applicable, EASA shall exercise the State of Manufacture functions applicable to the EU Member States under Annex 8 to the Chicago Convention for aircraft, aircraft engines, propellers and appliances for the life cycle of the product over which it has jurisdiction. Actions to address unsafe conditions shall be defined in the technical implementation procedures. 3.3.4. Any changes to the ownership or airworthiness status of a certificate issued by either Party's Technical Agent shall be timely communicated to the other Technical Agent.
View SourceView Similar (9)
Continued Airworthiness. 7.1.1. The importing authority may request the exporting authority's assistance in determining necessary action by the importing authority for the continued safety of the product. The importing authority retains sole responsibility for making such a decision. 7.1.2. The Authorities will provide each other with information on malfunctions, defects and accidents encountered in service at the address for service listed in Appendix A of this Technical Arrangement. 7.1.3. If any Authority becomes aware of an unsafe condition associated with the design, manufacture, operation or maintenance of a product, the reporting Authority should notify the other Authority without delay. That Authority will give expedient attention to the information and consider appropriate action to correct the condition. The reporting Authority should be advised of this information. 7.1.4. In the case of mandatory continuing airworthiness actions, each airworthiness authority shall keep the other fully informed by telephone or fax or email without delay of its intent to issue and the final issuance of all mandatory airworthiness modifications, special limitations, or special inspections which are determined to be necessary on products designed or manufactured in either State. The contact information for both authorities to receive the mandatory airworthiness information is in the list of contact according Appendix B1 and B4.
View SourceView Similar (2)
Continued Airworthiness. The FAA and EASA are jointly responsible for assuring the continued airworthiness of CFM engines.
View SourceView Similar (2)
Continued Airworthiness a) In accordance with the relevant provisions of ICAO 6 ’s Annex 8 to the Chicago Convention 7 , EASA will inform the HKCAD of all mandatory airworthiness information necessary for maintaining the airworthiness of the products, parts and appliances, subject to this Working Arrangement. b) The HKCAD will promptly notify EASA and the applicant of any unsafe condition associated with the design or manufacturing of the products, parts and appliances which are in service in Hong Kong and for which EASA acts as the State of Design. c) In addition, the HKCAD will report information to EASA on specific occurrences8, as soon as practicable, and will assist EASA, if necessary, in analysing their effect on the safety of the products which are in service in Hong Kong. EASA will respond to specific question(s) of HKCAD on the continuing airworthiness of the product concerned.
View Source
Continued Airworthiness. 7.1.1. The Importing Authority may request the Exporting Authority's assistance in determining necessary action by the Importing Authority for the continued safety of the product. The Importing Authority retains sole responsibility for making such a decision. 7.1.2. The Authorities will provide each other with information on malfunctions, defects and accidents encountered in service at the address for service listed in Appendix B of this Technical Arrangement. 7.1.3. If an Authority becomes aware of an unsafe condition associated with the design, manufacture, operation or maintenance of a product, the reporting Authority should notify the other Authority without delay. That Authority will give expedient attention to the information and consider appropriate action to correct the condition. The reporting Authority should be advised of this information.
View Source
Continued Airworthiness a. The Contracting Parties will co-operate in analysing airworthiness aspects originating from accidents and incidents having occurred on aeronautical products, parts and appliances listed in Attachment 1. b. In respect of aeronautical products, parts and appliances designed or manufactured under its jurisdiction, the exporting party will, where appropriate, specify any actions it deems necessary to correct any unsafe condition of the type design that may be discovered after an aeronautical product, parts and appliances are placed in service, including any actions in respect of components designed or manufactured by a supplier under a contract with the type certificate holder. c. In respect of an aeronautical product, parts and appliances designed or manufactured under its jurisdiction, the exporting party will assist the importing party in establishing any actions deemed necessary by the importing party for continuing airworthiness of such aeronautical product. d. Each Contracting Party will promptly inform the other of all mandatory airworthiness modifications, special inspections, special operating limitations or other actions which it deems necessary for continuing airworthiness of the relevant aeronautical products, parts and appliances designed or manufactured under its jurisdiction. e. The provisions of this Article shall be further elaborated in the technical procedures referred to in Attachment 2
View Source
Continued Airworthiness 
View SourceView Similar (11)

Related to Continued Airworthiness

  • Continued Compliance The Company shall comply with the Securities Act, the Securities Act Regulations, the Exchange Act and the Exchange Act Regulations so as to permit the completion of the distribution of the Public Securities as contemplated in this Agreement and in the Registration Statement, the Pricing Disclosure Package and the Prospectus. If at any time when a prospectus relating to the Public Securities is (or, but for the exception afforded by Rule 172 of the Securities Act Regulations (“Rule 172”), would be) required by the Securities Act to be delivered in connection with sales of the Public Securities, any event shall occur or condition shall exist as a result of which it is necessary, in the opinion of counsel for the Underwriters or for the Company, to (i) amend the Registration Statement in order that the Registration Statement will not include an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein not misleading; (ii) amend or supplement the Pricing Disclosure Package or the Prospectus in order that the Pricing Disclosure Package or the Prospectus, as the case may be, will not include any untrue statement of a material fact or omit to state a material fact necessary in order to make the statements therein not misleading in the light of the circumstances existing at the time it is delivered to a purchaser or (iii) amend the Registration Statement or amend or supplement the Pricing Disclosure Package or the Prospectus, as the case may be, in order to comply with the requirements of the Securities Act or the Securities Act Regulations, the Company will promptly (A) give the Representative notice of such event; (B) prepare any amendment or supplement as may be necessary to correct such statement or omission or to make the Registration Statement, the Pricing Disclosure Package or the Prospectus comply with such requirements and, a reasonable amount of time prior to any proposed filing or use, furnish the Representative with copies of any such amendment or supplement and (C) file with the Commission any such amendment or supplement; provided that the Company shall not file or use any such amendment or supplement to which the Representative or counsel for the Underwriters shall reasonably object. The Company will furnish to the Underwriters such number of copies of such amendment or supplement as the Underwriters may reasonably request. The Company has given the Representative notice of any filings made pursuant to the Exchange Act or the Exchange Act Regulations within 48 hours prior to the Applicable Time. The Company shall give the Representative notice of its intention to make any such filing from the Applicable Time until the later of the Closing Date and the exercise in full or expiration of the Over-allotment Option specified in Section 1.2 hereof and will furnish the Representative with copies of the related document(s) a reasonable amount of time prior to such proposed filing, as the case may be, and will not file or use any such document to which the Representative or counsel for the Underwriters shall reasonably object.

  • SAFETY CONDITIONS 8.1 The District shall make every effort to provide a place of employment which is safe. A unit member shall not be required to perform duties under conditions which endanger his/her health or safety. 8.2 The District shall make a good faith effort to reduce or alleviate those conditions which cause stress. The reduction of threats or intimidation by students or other members of the public shall be a continuous effort of both the District and unit members working together. 8.3 Unit members who feel they are being required to work under unsafe or unsanitary conditions, or to perform tasks that endanger their health or safety, shall submit written recommendations for changes to the principal or site administrator. The principal or site administrator shall respond and take corrective action as needed. 8.4 The District shall ensure that each unit member has access to a lockable desk, cupboard or other lockable space. 8.5 Unit members other than the school nurse, shall not be required to provide specialized physical health care. 8.6 Unit members are authorized to administer discipline to students in accordance with the Education Code and the rules and regulations of the District. A written description of the rights and duties of unit members with respect to student discipline shall be provided to unit members at the beginning of each school year. In addition, said written descriptions shall be available at each school site. The District shall not take action against a unit member who uses reasonable and lawful force in the performance of his/her duties. Unit members shall report any physical assault against the unit member to the principal or site administrator, who shall report the incident to the appropriate law enforcement agency. 8.7 During conditions of excessive heat, the Superintendent or designee, whenever appropriate, will reduce the school day for students in schools with non-operable air conditioning, to the State required minimum day. Unit members may be directed to proceed to a district air conditioned location for the remainder of the service day. The Superintendent or designee shall have the discretion to reduce the school day to the State required minimum day whenever other weather conditions pose a danger to students and unit members. Unit members may be directed to proceed to another District location for the remainder of the service day. 8.8 For protection of unit members whose normal duties may require transportation of students in unit member's vehicles, the District shall provide secondary insurance against personal liability for damages for death, injury to a person, or damage or loss of property caused by the negligent act or omission of the unit member when acting within the scope of his/her employment. Additionally, the District will provide this same coverage to unit members who are required to travel from site-to- site or make home visitations in order to perform assigned duties. When a loss occurs, the unit member's primary insurance deductible will be reimbursed up to a maximum of $500.00. If administrator approval is unobtainable, the teacher's best judgment for the protection of student safety shall be included in the above. 8.9 Restrooms shall be available to unit members whenever they are required to render service. 8.10 Adequate lounge facilities shall be provided for unit members' use. Additionally, the District shall provide, when fiscally possible, at least one piece of furniture per site where a staff member may recline. The site safety committee shall determine the placement of these facilities and furniture. 8.11 Unit members shall have the right to refer to the office, a student who exhibits symptoms of illness which endanger the health of other students or the unit member. The student shall not return to the classroom until it is determined by the principal/site administrator that his/her health is not a clear and present danger to those with whom he/she shares space. The student shall be given a pass to return to class signed by the principal/site administrator confirming the decision. 8.12 The District shall reimburse or repair articles of clothing, glasses and hearing aids damaged while the unit member is acting in the proper discharge of disciplinary/ supervisorial duties. In addition, all other accessories damaged under the conditions listed above shall be reimbursed up to a maximum of $200.00.

  • Continued Operations Continue at all times to conduct its business and engage principally in the same line or lines of business substantially as heretofore conducted.

  • Maintenance Requirements The Contractor shall ensure and procure that at all times during the Maintenance Period, the Project Highway conforms to the maintenance requirements set forth in Schedule-E (the “Maintenance Requirements”).

  • Continued Service The Indemnitee shall continue to serve at the will of the Company as a Director of the Company so long as he is duly elected and qualified in accordance with the Regulations or until he resigns in writing in accordance with applicable law.