CRITICAL ITEMS Sample Clauses

The 'CRITICAL ITEMS' clause identifies specific goods, components, or deliverables within a contract that are essential to the successful completion of the project or fulfillment of contractual obligations. In practice, this clause typically lists items that, if delayed, defective, or missing, could significantly impact the project's timeline, safety, or overall performance—such as key machinery, safety equipment, or custom-fabricated parts. By clearly designating these items, the clause ensures heightened attention to their procurement, quality control, and timely delivery, thereby minimizing the risk of project delays or failures due to issues with essential components.
CRITICAL ITEMS. 18.1. Critical items are designated in a Specification. Any delivery of critical items must be accompanied by a Certificate of Compliance signed by an authorised representative of your Quality Assurance Department, attesting that the requirements of the Specification have been met. 18.2. Critical items must be manufactured to the approved construction and procedures. No change will be made to construction or production methods without prior written approval from us. 18.3. Critical items must always be accompanied by a manufacturer's batch number which is traceable. You must maintain records to allow traceability back to the initial lot identification of all raw constituents used in the manufacture of items supplied against the Specification.
View SourceView Similar (2)
CRITICAL ITEMS. All Seller hardware associated with the Server, Seller supplied interfaces, and Capture Stations that prohibit the Buyer from performing their day to day duties associated with the capture and storage of mug photo images or as defined as System Downtime under paragraph D.6.1 shall be considered as CRITICAL ITEMS. The only hardware exception to this paragraph will be the printers.
View Source
CRITICAL ITEMS. All IWS hardware associated with the Server, IWS supplied interfaces, and Capture Stations that prohibit the COUNTY from performing their day to day duties associated with the capture and storage of mug photo images shall be considered as CRITICAL ITEMS. The only hardware exception to this paragraph will be the printers.
View Source
CRITICAL ITEMS. All Contractor supplied hardware associated with the Server, Contractor supplied interfaces, and Capture Stations that are required to the County to perform its day to day duties associated with the capture and storage of "mug" photo images shall be considered as Critical Items. The only hardware exception to this paragraph will be the printers.
View Source
CRITICAL ITEMS. 10.1. In addition to the Scope of Work and Attachments, the items listed in this section are critical to the success of the project. These items will be used in evaluating and scoring the proposal. Vendor proposal should address items in this section in enough detail to provide evaluators an accurate understanding of vendor capabilities. Proposals that fail to sufficiently respond to these items may be considered non-responsive.
View Source

Related to CRITICAL ITEMS

  • Critical Illness Three (3) days per year, with pay, shall be granted in the case of a critical illness or accident to a member of the employee's immediate family as defined in Section 9.4.2. A statement by the physician verifying the need for the employee to be present with the immediate family member shall be attached to the absence form.

  • Electrical Items All electrical items purchased under this Grant Agreement/Contract or used in the performance of approved and eligible grant-funded activities must meet all applicable Occupational Safety and Health Administration (OSHA) standards and regulations, and bear the appropriate listing from Underwriters Laboratory (UL), Factory Mutual Resource Corporation (FMRC), or National Electrical Manufacturers Association (NEMA).

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Review Systems; Personnel It will maintain business process management and/or other systems necessary to ensure that it can perform each Test and, on execution of this Agreement, will load each Test into these systems. The Asset Representations Reviewer will ensure that these systems allow for each Review Receivable and the related Review Materials to be individually tracked and stored as contemplated by this Agreement. The Asset Representations Reviewer will maintain adequate staff that is properly trained to conduct Reviews as required by this Agreement.

  • Contract Database Metadata Elements Title: Sayville Union Free School District and Sayville Union Free School Custodial and Maintenance Employees Unit, United Public Service Employees Union (UPSEU), Local 424 (2011) Employer Name: Sayville Union Free School District Union: Sayville Union Free School Custodial and Maintenance Employees Unit, United Public Service Employees Union (UPSEU) Local: 424 Effective Date: 07/01/2011 Expiration Date: 06/30/2015 PERB ID Number: 6131 Unit Size: 55 Number of Pages: 24 For additional research information and assistance, please visit the Research page of the Catherwood website - ▇▇▇▇://▇▇▇.▇▇▇.▇▇▇▇▇▇▇.▇▇▇/library/research/ For additional information on the ILR School - ▇▇▇▇://▇▇▇.▇▇▇.▇▇▇▇▇▇▇.▇▇▇/ 55 People TABLE OF CONTENTS ARTICLE Page XXII ANNUAL LEAVE DAYS 14 XXV BREAKS 18 XXVI CIVIL SERVICE LAW ARTICLE SECTION 75 18 XXVIII DURATION 19 XIV EMERGENCY WORK 11 XXI FOUL WEATHER CLOTHING 14 XI GRIEVANCE PROCEDURE 9 XVI HIGHER JOB CLASSIFICATION 12 XVIII HOLIDAYS 13 XV HOLIDAY AND WEEKEND BUILDING CHECKS 12 V INSURANCE 4 X LAYOFF, DISPLACEMENT AND RECALL ORDER 8 VII MANAGEMENT RIGHTS 7 XXVII MISCELLANEOUS 19 XVII NOTICES OF PROMOTIONS 13 XIII OVERTIME 10 II PAYROLL DEDUCTIONS 1 III PERSONNEL FILES 2 XXIV PHYSICAL EXAMINATIONS 18 XXIII RETIREMENT 16 IX STRIKES AND LOCKOUTS 7 XIX VACATIONS 13 XX VISITATION 14 IV WAGES 3 VI WORKERS' COMPENSATION 6 XII WORKWEEK 10 VIII WRITTEN BOARD POLICY 8 APPENDIX A 20 4/20/2016 AGREEMENT made and entered into this day of November 2013 between the SAYVILLE UNION FREE SCHOOL DISTRICT (hereinafter referred to as the “District”) and United Public Service Employees Union, ▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇, N.Y. 11779 (hereinafter referred to as the “Union”).