Definition of Pipe movements Sample Clauses

Definition of Pipe movements. ‌ The Pipe movements are entered in three directions. The axes of the directions of movement are defined as in Figure 7 (or as described above). A resulting component is calculated from the three path components. The maximum total path is limited to 900 mm. Support data can also be read in from files insofar as they are available. The file menu is opened via the ‘Open File’ button. The file ending ‘LIF’ (LICAD Input File) is preset. The values deposited there are accordingly filled into the input fields of the mask. The values can however still be edited or supplemented.
View SourceView Similar (5)
Definition of Pipe movements. The Pipe movements are entered in three directions. The axes of the directions of movement are defined as in Figure 17 (or as described above). A resulting component is calculated from the three path components. The maximum total path is limited to 900 mm. Support data can also be read in from files insofar as they are available. The file menu is opened via the ‘Open File’ button. The file ending ‘LIF’ (LICAD Input File) is preset. The values deposited there are accordingly filled into the input fields of the mask. The values can however still be edited or supplemented. The LIF files format corresponds to ASCII, the frame for a so-called INI file. An example of this can be found under chapter 7.8. These files can be made with PDMS or INTERGRAPH software. To enable the alternative input screen refer to Option settings – System setup.
View SourceView Similar (2)

Related to Definition of Pipe movements

  • Common Areas - Definition The term "Common Areas" is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Industrial Center that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and of other lessees of the Industrial Center and their respective employees, suppliers, shippers, customers and invitees, including parking areas, loading and unloading areas, trash areas, roadways, sidewalks, walkways, parkways, driveways and landscaped areas.

  • Early Construction of Base Case Facilities Developer may request Connecting Transmission Owner to construct, and Connecting Transmission Owner shall construct, subject to a binding cost allocation agreement reached in accordance with Attachment S to the ISO OATT, including Section 25.8.7 thereof, using Reasonable Efforts to accommodate Developer’s In-Service Date, all or any portion of any System Upgrade Facilities or System Deliverability Upgrades required for Developer to be interconnected to the New York State Transmission System which are included in the Base Case of the Class Year Study for the Developer, and which also are required to be constructed for another Developer, but where such construction is not scheduled to be completed in time to achieve Developer’s In-Service Date.

  • Environmental Definitions For purposes of this Agreement, the terms set forth below shall have the following meanings.

  • Definition of Overtime All time worked in excess of forty (40) hours during any one (1) week shall be considered overtime. All overtime must be properly authorized by the Employer.

  • Definition of Layoff A layoff shall be defined as a reduction in the work force or a reduction in the regular hours of work as defined in this Agreement.