DEMO Edition Clause Samples

The DEMO Edition clause defines the terms under which a demonstration or trial version of a product or service is provided to users. Typically, this clause outlines the limitations of the demo version, such as restricted features, time-limited access, or non-commercial use only. Its core practical function is to allow potential customers to evaluate the product before committing to a full purchase, while protecting the provider from misuse or unauthorized exploitation of the demo version.
DEMO Edition. Software intended for Non-productive Use only, made available free of charge, for demonstration purposes. The DEMO Edition shall be active for a period of 90 days. Unless a separate agreement made between the Licensee and the Licensor expressly stipulates otherwise, it is prohibited to Use the Software in the DEMO Edition and the EXPRESS Edition simultaneously; and it is prohibited to use more than one DEMO Edition by one Licensee simultaneously.
View SourceView Similar (6)
DEMO Edition. If you have installed the Software, but have not paid for and activated the Software, this Section 3(a) applies. Your license permits you to use the Software solely for you personal, non- commercial purposes; the Software may not be used on any device that is used in a business. Demo Edition is used for testing purposes only.
View SourceView Similar (2)
DEMO Edition. Bitwig GmbH grants the User the non-exclusive right to permanently install the Final Version for non-commercial purposes on a terminal device, and to run and copy it on such device to the extent required in order to test the Final Version’s functions. However, the User may not use the Final Version to store the music produced by means of the Final Version, nor may the User export any work results obtained from the Final Version.
View Source

Related to DEMO Edition

  • HIV/AIDS Model Workplace Guidelines Grantee will: a. implement the System Agency’s policies based on the Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/AIDS), AIDS Model Workplace Guidelines for Businesses at ▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇▇▇.▇▇.▇▇/hivstd/policy/policies.shtm, State Agencies and State Grantees Policy No. 090.021. b. educate employees and clients concerning HIV and its related conditions, including AIDS, in accordance with the Texas. Health & Safety Code §§ 85.112-114.

  • Hot Weather Guidelines For the purposes of site based discussions regarding the need to plan and perform work during expected periods of hot weather, the following issues shall be considered in conjunction with proper consideration of Occupational Health and Safety issues.

  • Monthly MWBE Contractor Compliance Report A. In accordance with 5 NYCRR § 142.10, Contractor is required to report Monthly MWBE Contractor Compliance to OGS during the term of the Contract for the preceding month’s activity, documenting progress made towards achievement of the Contract MWBE goals. OGS requests that all Contractors use the New York State Contract System (“NYSCS”) to report subcontractor and supplier payments made by Contractor to MWBEs performing work under the Contract. The NYSCS may be accessed at ▇▇▇▇▇://▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/. This is a New York State- based system that all State agencies and authorities will be implementing to ensure uniform contract compliance reporting throughout New York State. B. When a Contractor receives a payment from a State agency, it is the Contractor’s responsibility to pay its subcontractors and suppliers in a timely manner. On or after the first day of each month, the Contractor will receive an email or fax notification (“audit notice”) indicating that a representative of its company needs to log-in to the NYSCS to report the company’s MWBE subcontractor and supplier payments for the preceding month. The Contractor must also report when no payments have been made to a subcontractor or supplier in a particular month with entry of a zero dollar value in the NYSCS. Once subcontractor and supplier payments have been entered into the NYSCS, the subcontractor(s) and supplier(s) will receive an email or fax notification advising them to log into the NYSCS to confirm that they actually received the reported payments from the Contractor. It is the Contractor’s responsibility to educate its MWBE subcontractors and suppliers about the NYSCS and the need to confirm payments made to them in the NYSCS. C. To assist in the use of the NYSCS, OGS recommends that all Contractors and MWBE subcontractors and suppliers sign up for the following two webinar trainings offered through the NYSCS: “Introduction to the System – Vendor training” and “Contract Compliance Reporting - Vendor Training” to become familiar with the NYSCS. To view the training schedule and to register visit: ▇▇▇▇▇://▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/events.asp D. As soon as possible after the Contract is approved, Contractor should visit ▇▇▇▇▇://▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ and click on “Account Lookup” to identify the Contractor’s account by company name. Contact information should be reviewed and updated if necessary by choosing “Change Info.” It is important that the staff member who is responsible for reporting payment information for the Contractor be listed as a user in the NYSCS. Users who are not already listed may be added through “Request New User.” When identifying the person responsible, please add “- MWBE Contact” after his or her last name (i.e., ▇▇▇▇ ▇▇▇ – MWBE Contact) to ensure that the correct person receives audit notices from the NYSCS. NYSCS Technical Support should be contacted for any technical support questions by clicking on the links for “Contact Us & Support” then “Technical Support” on the NYSCS website. E. If Contractor is unable to report MWBE Contractor Compliance via the NYSCS, Contractor must submit a Monthly MWBE Contractor Compliance Report on Form MWBE 102 to OGS, by the 10th day of each month during the term of the Contract, for the preceding month’s activity to: OGS MWBE Office, ▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇. Phone: ▇▇▇-▇▇▇-▇▇▇▇; Fax: ▇▇▇-▇▇▇-▇▇▇▇. F. It is the Contractor’s responsibility to report subcontractor and supplier payments. Failure to respond to payment audits in a timely fashion through the NYSCS, or by paper to OGS, may jeopardize future payments pursuant to the MWBE liquidated damages provisions in clause IX below.

  • Contractor Sales Reporting Vendor Management Fee Contractor Reports Contract Sales Reporting. Contractor shall report total Contract sales quarterly for this Cooperative Purchasing Agreement to Enterprise Services, as set forth below. Contract Sales Reporting System. Contractor shall report quarterly Contract sales in Enterprise Services’ Contract Sales Reporting System. Enterprise Services shall provide Contractor with a login password and a vendor number. The password and vendor number shall be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized Purchasers specified herein during the term of the Contract. If there are no Contract sales during the reporting period, Contractor must report zero sales. Due dates for Contract Sales Reporting. Quarterly Contract Sales Reports must be submitted electronically by the following deadlines for all Contract sales invoiced during the applicable calendar quarter: Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.25 percent on the purchase price for all Cooperative Purchasing Agreement sales (the purchase price is the total invoice price less applicable sales tax) under this Cooperative Purchasing Agreement. The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Contract sales invoiced (not including sales tax) x .0125. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services shall invoice Contractor quarterly based on Contract sales reported by Contractor. Contractor is not to remit payment until Contractor receives an invoice from Enterprise Services. Payments must be received within thirty (30) calendar days of the invoice issue date from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference the invoice number. Contractor’s VMF payment to Enterprise Services must reference this Contract number, the year and quarter for which the VMF is being remitted, and Contractor’s name as set forth in this Contract, if not already included on the face of the check. Contractor’s failure to report accurate total net Contract sales, to submit a timely Contract sales report, or to remit timely payment of the VMF to Enterprise Services, shall be cause for Enterprise Services, at its discretion, to suspend Contractor or terminate this Contract or exercise remedies provided by law. Without limiting any other available remedies, the parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums, the sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) calendar days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Contract Sales Report. Contractor shall provide to Enterprise Services a detailed annual Contract sales report. Such report shall include, at a minimum, the following: The Goods and/or Services sold and provided (including, as applicable, category or another identifier); Services purchased by Purchaser; and Contract price. This report must be provided in an electronic format that can be read by Microsoft (MS) Excel. Such report is due within thirty (30) calendar days of the annual anniversary of the effective date of this Contract.

  • Child Abuse Reporting Requirement Grantee will: a. comply with child abuse and neglect reporting requirements in Texas Family Code Chapter 261. This section is in addition to and does not supersede any other legal obligation of the Grantee to report child abuse. b. develop, implement and enforce a written policy that includes at a minimum the System Agency’s Child Abuse Screening, Documenting, and Reporting Policy for Grantees/Providers and train all staff on reporting requirements. c. use the System Agency Child Abuse Reporting Form located at ▇▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇▇▇.▇▇.▇▇/Contact Us/report abuse.asp as required by the System Agency. d. retain reporting documentation on site and make it available for inspection by the System Agency.