Common use of Designated Locations Clause in Contracts

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock HardwareUnits. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock Safety shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency Customer on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. While Flock may consider input from Agency will provide advice regarding the location of positioning of such Units, Customer will have the ultimate decision regarding the location, position position, and angle of the Flock Hardware Units (each Unit location so designated by Customer, a “Designated Location”) and collaborate with Agency ). Due to design the Deployment Plan confirming fact that Customer selects the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Location, Flock shall have no liability to Agency Customer resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations Locations, or delay in installation due to AgencyCustomer’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by Flock and accepted by Customer without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Customer, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Customer's request will incur a charge for ▇▇▇▇▇Flock’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by ▇▇▇▇▇ and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by Flock and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for ▇▇▇▇▇Flock’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or functionality, Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware, unless Agency informs Flock that such location(s) cannot be used. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent Any changes to the Deployment Plan (“Reinstalls”) subsequent to three (3) business days after installation will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency Authorized End User regarding location, position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock HardwareUnits. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to AgencyAuthorized End User’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) DocuSign Envelope ID: 3A890C6A-51E3-4949-98F9-1AB2666C593D and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to re-camera re- positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock HardwareAll Reinstalls must be approved in writing by the Parties.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://https:// ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall/▇▇▇▇▇▇▇▇▇-fee▇▇▇-schedule▇▇▇▇▇▇▇▇) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware. Notwithstanding anything hereinabove to the contrary, Agency being a Georgia tax exempt municipality shall not be invoiced for, be liable for, or pay any amount constituting Georgia sales tax, use, excise, gross receipts, or other similar taxes or federal taxes with respect to any aspect of the Agreement.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock HardwareUnits. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇Flock’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock Safety shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the recommended location and positioning of the Flock Hardware for to achieve optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding shall finalize location, position and angle of the Flock Hardware (each Hardware location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock Hardware; however, will under no circumstances place Hardware in any location that is expressly against Agency’s approval. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock Safety shall have full discretion on decision to reinstall Flock HardwareHardware and final discretion on the location of Hardware Reinstalls. However, Flock will under no circumstances place or reinstall Hardware in any location that is expressly against Agency’s approval.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by Flock and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for ▇▇▇▇▇Flock’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock HardwareReinstallation will only be charged if requested by Agency and only after initial installation and successful testing of the Hardware and Unit.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by ▇▇▇▇▇ and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing DocuSign Envelope ID: 3D67E4F0-6C13-470A-AAAB-C526511D2A55 foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency Authorized End User regarding location, position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock HardwareUnits. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to AgencyAuthorized End User’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to re-camera re- positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock HardwareAll Reinstalls must be approved in writing by the Parties.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by Flock and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by bothFlock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for ▇▇▇▇▇Flock’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (““ Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits readyread y, if necessary. After installation, any subsequent changes to the Deployment Plan (““ Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioningre -positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation installa- tion of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware Units (each Unit location so designated by Agency, a “Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations). Flock shall have final discretion on location of Flock HardwareUnits. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, any subsequent changes to the Deployment Plan deployment plan (“ReinstallsRein- stalls”) will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to camera re-positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock Safety shall have full discretion on decision to reinstall Flock Hardware.

Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior Prior to performing the physical installation of the Flock HardwareUnits, Flock shall advise Agency on the location and positioning of the Flock Hardware Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from and Agency regarding locationmust mutually agree on the location (mounting site or pole), position and angle of the Flock Hardware Units (“each Unit location so designated by Agency, a “ Designated LocationLocation ”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. Designated Locations that are suggested by ▇▇▇▇▇ and accepted by Agency without alteration will be known as Flock Designated Locations. After installationa deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the Deployment Plan deployment plan (“Reinstalls“ Reinstalls ”) driven by Agency's request will incur a charge for ▇▇▇▇▇’s then- then-current list price for Reinstalls, as listed in the then-current Reinstall policy Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-fee- schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such feescharges. These changes include but are not limited to re-camera re- positioning, adjusting of the camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.