Electronic Transducers and Flow Computers Sample Clauses

The 'Electronic Transducers and Flow Computers' clause defines the requirements and standards for using electronic devices to measure and record the flow of substances, such as oil or gas, in a pipeline or processing facility. It typically outlines the types of approved equipment, calibration procedures, and data recording protocols to ensure accurate and reliable measurement. By establishing clear guidelines for the use and maintenance of these electronic systems, the clause helps prevent disputes over measurement accuracy and ensures consistent, verifiable data for all parties involved.
Electronic Transducers and Flow Computers in accordance with the applicable standards of the American Petroleum Institute, including but not limited to API No. 21.1, and any subsequent amendments, revisions, or modification thereof.
View SourceView Similar (5)

Related to Electronic Transducers and Flow Computers

  • Electronic Transfer Electronic transfer of the Offered Securities shall be made at the time of purchase in such names and in such denominations as the Representative shall specify.

  • Electronic Transmissions (a) Each of the Agent, the Company and its Subsidiaries, the Banks, and each of their Affiliates is authorized (but not required) to transmit, post or otherwise make or communicate, in its sole discretion, Electronic Transmissions in connection with any Loan Document and the transactions contemplated therein. The Company and its Subsidiaries hereby acknowledges and agrees that the use of Electronic Transmissions is not necessarily secure and that there are risks associated with such use, including risks of interception, disclosure and abuse and each indicates it assumes and accepts such risks by hereby authorizing the transmission of Electronic Transmissions. (b) All uses of an E-System shall be governed by and subject to, in addition to Section 13.6 and this Section 13.24, any separate terms and conditions posted or referenced in such E-System and any related contractual obligations executed by the Agent, the Company and its Subsidiaries and the Banks in connection with the use of such E-System. (c) All E-Systems and Electronic Transmissions shall be provided “as is” and “as available”. None of the Agent or any of its Affiliates warrants the accuracy, adequacy or completeness of any E-Systems or Electronic Transmission, and each disclaims all liability for errors or omissions therein. No warranty of any kind is made by the Agent or any of its Affiliates in connection with any E Systems or Electronic Transmission, including any warranty of merchantability, fitness for a particular purpose, non-infringement of third-party rights or freedom from viruses or other code defects. The Agent, the Company and its Subsidiaries, and the Banks agree that the Agent has no responsibility for maintaining or providing any equipment, software, services or any testing required in connection with any Electronic Transmission or otherwise required for any E-System. The Agent and the Banks agree that the Company shall have no responsibility for maintaining or providing any equipment software, services or any testing required in connection with any Electronic Transmission or otherwise required for any E-System.

  • Counterparts; Electronic Transmission (a) This Agreement may be executed by the parties hereto in separate counterparts, each of which when so executed and delivered shall be an original, but all such counterparts shall together constitute but one and the same instrument. Delivery of an executed counterpart of a signature page of this Agreement by telecopy, e-mailed .pdf or any other electronic means that reproduces an image of the actual executed signature page shall be effective as delivery of a manually executed counterpart of this Agreement. The words “execution,” “signed,” “signature,” “delivery,” and words of like import in or relating to any document to be signed in connection with this Agreement and the transactions contemplated hereby shall be deemed to include electronic signatures, deliveries or the keeping of records in electronic form, each of which shall be of the same legal effect, validity or enforceability as a manually executed signature, physical delivery thereof or the use of a paper-based recordkeeping system, as the case may be, to the extent and as provided for in any applicable law, including the Federal Electronic Signatures in Global and National Commerce Act or any other similar state laws based on the Uniform Electronic Transactions Act. (b) The Indenture Trustee, the Owner Trustee, the Delaware Trustee and the Issuer are authorized to accept written instructions, directions, reports, notices or other communications signed manually, by way of faxed signatures, or delivered by Electronic Transmission. In the absence of bad faith or negligence on its part, each of the Indenture Trustee, the Owner Trustee, the Delaware Trustee and the Issuer may conclusively rely on the fact that the Person sending instructions, directions, reports, notices or other communications or information by Electronic Transmission is, in fact, a Person authorized to give such instructions, directions, reports, notices or other communications or information on behalf of the party purporting to send such Electronic Transmission and, in the absence of bad faith or negligence, shall not have any liability for any losses, liabilities, costs or expenses incurred or sustained by any party as a result of such reliance upon or compliance with such instructions, directions, reports, notices or other communications or information to the Indenture Trustee, the Owner Trustee, the Delaware Trustee or the Issuer, including, without limitation, the risk of either the Indenture Trustee, the Owner Trustee, the Delaware Trustee or the Issuer acting on unauthorized instructions, notices, reports or other communications or information, and the risk of interception and misuse by third parties.

  • Electronic Transmission For purposes of these Bylaws, “electronic transmission” means any form of communication, not directly involving the physical transmission of paper, that creates a record that may be retained, retrieved, and reviewed by a recipient thereof, and that may be directly reproduced in paper form by such a recipient through an automated process.

  • Electronic Visit Verification ("EVV A. To ensure: 1. the EVV system is used to verify the provision of services governed under 40 TAC, Chapter 68 or its successor; 2. only authorized people access the Contractor's EVV account; 3. all data elements required by HHSC or HHSC's designee are uploaded or entered and maintained in the EVV system completely, accurately, and prior to submitting the claim; 4. that each time services governed by 40 TAC Chapter 68 or its successor are delivered to an individual, the Contractor's staff uses an HHSC-approved EVV system; and 5. service delivery documentation is immediately available for review by HHSC when requested. B. Equipment provided to Contractor by HHSC, HHSC’s designee, or an HHSC-approved EVV vendor, must be returned in good condition when the equipment is no longer needed under this Contract. In the context of this agreement, “good condition” means Contractor must not place any marks or identifying information on the equipment and may not alter information on the equipment including logos and serial numbers. If the equipment is lost, stolen, marked, altered or damaged by Contractor, Contractor may be required to pay the replacement cost for each piece of equipment that is lost, stolen, marked or damaged. Replacement costs for lost, stolen, marked or damaged equipment may be assessed periodically. If Contractor recovers previously lost or stolen equipment for which Contractor paid the replacement cost in the prior 12 months, Contractor may return the equipment and be reimbursed for the replacement costs within 12 months of the date HHSC, HHSC’s designee or an HHSC-approved EVV vendor (as applicable) received payment in full from the Contractor. This is provided the equipment is returned in good condition as specified above. C. HHSC may perform EVV compliance oversight reviews to determine if Contractor has complied with EVV compliance requirements as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC EVV website or EVV Policy Handbook. D. If the Contractor determines an electronic record in the EVV system needs to be adjusted at any time, the Contractor will make the adjustment in the EVV system using the most appropriate EVV reason code number(s), EVV reason code description(s) and enter any required free text when completing visit maintenance in the EVV system, if applicable. E. Contractor must begin using an HHSC-approved EVV system prior to submitting an EVV relevant claim. F. All claims for services required to use EVV (EVV claims) must match to an accepted EVV visit transaction in the EVV Aggregator (the state’s centralized EVV database) prior to reimbursement of an EVV claim. Without a matching accepted EVV visit transaction, the claim will be denied. G. Contractor must submit all EVV related claims through the Texas Medicaid Claims Administrator, or as otherwise described in the EVV Policy posted on the HHSC EVV website or in the EVV Policy Handbook. H. Contractor must complete all required EVV training as outlined in the EVV Policy posted on the HHSC EVV website or EVV Policy Handbook: • Prior to using either an EVV vendor system or an EVV proprietary system and • Yearly thereafter. I. Contractor and, if applicable, the Contractor’s appointed EVV system administrator, must complete, sign and date the EVV Onboarding Form as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC website or EVV Policy Handbook.