EMS-RTU Clause Samples

The EMS-RTU clause defines the requirements and responsibilities related to the use of Energy Management System Remote Terminal Units (EMS-RTUs) within a project or agreement. It typically outlines specifications for installation, maintenance, and data communication protocols for these devices, which are used to monitor and control electrical systems remotely. For example, the clause may require the contractor to ensure that the EMS-RTU is compatible with existing infrastructure and to provide regular status updates. The core function of this clause is to ensure reliable and standardized remote monitoring and control, thereby reducing operational risks and improving system efficiency.
EMS-RTU. The Connecting Transmission Owner will procure and provide the remote telemetry unit (“RTU”) to the Interconnection Customer for installation on the mounting panel. The RTU cabinet is typically 42" H x 30" W x 12" D and shall be wall-mounted with the bottom edge 36" above the floor with a 5-foot clear working space in front of the mounting panel.
View SourceView Similar (49)
EMS-RTU. Connecting Transmission Owner will procure and provide the Connecting Transmission Owner-owned RTU to the Interconnection Customer for installation on the mounting panel. The RTU cabinet that is typically 42”H x 30”W x 12”D and shall be wall-mounted.
View SourceView Similar (33)
EMS-RTU. The Connecting Transmission Owner’s RTU shall be located in the Bakerstand Solar Collector Substation. The size of the RTU cabinet will be 42”H x 30”W x 12”D.
View SourceView Similar (9)
EMS-RTU. The Connecting Transmission Owner’s RTU shall be located in the ▇▇▇▇▇▇ Road Collector Substation control enclosure. The size of the RTU cabinet is 42”H x 30”W x 12”D.
View SourceView Similar (9)
EMS-RTU. The Connecting Transmission Owner will procure and provide the RTU to the Interconnection Customer for installation on the mounting panel. The RTU cabinet is typically 42" H x 30" W x 12" D. It shall be wall-mounted with the bottom edge 36" above the floor with a 5- foot clear working space in front of the mounting panel. As per ESB 752, the Interconnection Customer shall install the RTU indoors and within 15 feet of the meter(s), and remote from: • Heavy traffic areas, work areas, and loading areas; • Heat producing or high electrostatic or electromagnetic field producing equipment; and • Station batteries. The Connecting Transmission Owner shall complete all wiring, testing and commissioning.
View SourceView Similar (9)
EMS-RTU. The Connecting Transmission Owner provided RTU shall be located at the Sky High Solar Collector Substation.
View SourceView Similar (6)
EMS-RTU. The RTU will be located at the Hills Solar Collector Substation in an RTU cabinet that is typically 42”H x 30”W x 12”D, wall-mounted with the bottom edge 36” above the floor with a 5-foot clear working space in front of the mounting panel. (Note: If no indoor facility is available, then installation of the RTU and revenue metering equipment in a dedicated, weatherproof, heated cubicle (accessible only to Connecting Transmission Owner) is acceptable.)
View SourceView Similar (6)
EMS-RTU. The Connecting Transmission Owner will procure and provide the RTU to the Interconnection Customer for installation on the mounting panel. The RTU cabinet is typically 42” H x 30” W x 12” D and shall be wall-mounted with the bottom edge 36” above the floor with a 5-foot clear working space in front of the mounting panel. The Interconnection Customer shall provide a dedicated 10A, 48 VDC or 125 VDC circuit for the RTU from the station battery system for the ▇▇▇▇▇▇ Solar Collector Substation. The Connecting Transmission Owner shall procure and install the Ruggedcom RX1501 gateway required for interfacing the RTU to the Connecting Transmission Owner’s energy management system (“EMS”) network, and will complete all wiring, testing and commissioning of the RTU.
View SourceView Similar (2)
EMS-RTU. The Connecting Transmission Owner will procure and provide the RTU to the Developer for installation in the Roaring Brook Wind Collector Station control enclosure. The RTU cabinet is typically 42" H x 30" W x 12" D and shall be wall-mounted with the bottom edge 36" above the floor with a 5-foot clear working space in front of the mounting panel. As per ESB 756A, the Developer shall install the RTU indoors and within 15 feet of the meter(s), and remote from: • Heavy traffic areas, work areas, and loading areas; • Heat producing or high electrostatic or electromagnetic field producing equipment; and • Station batteries. A dedicated 20A, 120VAC, single phase 60 hertz power circuit is required for the RTU. All conduit and wiring (minimum of No. 10 AWG copper) to the telemetry cabinet for this circuit shall enter the cabinet from the bottom. A 3-ft length of all conductors shall be provided for final Connecting Transmission Owner connection cabinet. A dedicated 10A, 48VDC or a preferred 125VDC input is required to the RTU from the station battery. The Connecting Transmission Owner-owned revenue meter at the Roaring Brook Wind Collector Substation shall connect to the RTU via RS-485. RS-485 to RS-232 converters will be required. The Connecting Transmission Owner shall complete all final termination of Developer supplied wiring within the RTU cabinet, along with all RTU testing and commissioning. A data communication service shall be installed by the Developer in accordance with Section 1(a) above. Required EMS data requirements are as follows: • Status of 230kV switch; • Status of 230kV circuit breaker; • MW at 230kV line side of the generator step-up (“GSU”) transformer; • MVAR at 230V line side of the GSU transformer; and • Dispatch signals (if required) will be required to be transmitted to or from the NYISO via the Connecting Transmission Owner’s EMS RTU. To determine the data requirements of the NYISO, the Developer shall contact the appropriate customer service representative at the NYISO for determination of the economic model that will be applied for the Large Generating Facility. The Developer shall convey to the Connecting Transmission Owner, as part of its initial final design and equipment specifications submittal, the NYISO’s data requirements and PTID for incorporation in the system design.
View Source

Related to EMS-RTU

  • COVID-19 Employees of Contractor and/or persons working on its behalf, including, but not limited to, subcontractors (collectively, “Contractor Personnel”), while performing services under this Agreement and prior to interacting in person with City employees, contractors, volunteers, or members of the public (collectively, “In-Person Services”) must be fully vaccinated against the novel coronavirus 2019 (“COVID-19”). “Fully vaccinated” means that 14 or more days have passed since Contractor Personnel have received the final dose of a two-dose COVID-19 vaccine series (Moderna or Pfizer-BioNTech) or a single dose of a one-dose COVID-19 vaccine (▇▇▇▇▇▇▇ & ▇▇▇▇▇▇▇/▇▇▇▇▇▇▇) and all booster doses recommended by the Centers for Disease Control and Prevention. Prior to assigning Contractor Personnel to perform In-Person Services, Contractor shall obtain proof that such Contractor Personnel have been fully vaccinated. Contractor shall retain such proof for the document retention period set forth in this Agreement. Contractor shall grant medical or religious exemptions (“Exemptions”) to Contractor Personnel as required by law. If Contractor wishes to assign Contractor Personnel with Exemptions to perform In- Person Services, Contractor shall require such Contractor Personnel to undergo weekly COVID-19 testing, with the full cost of testing to be borne by Contractor. If Contractor Personnel test positive, they shall not be assigned to perform In-Person Services or, to the extent they have already been performing In-Person Services, shall be immediately removed from those assignments. Furthermore, Contractor shall immediately notify City if Contractor Personnel performing In-Person Services (1) have tested positive for or have been diagnosed with COVID-19, (2) have been informed by a medical professional that they are likely to have COVID-19, or (3) meet the criteria for isolation under applicable government orders.

  • Procurement of Goods and Services (a) If the HSP is subject to the procurement provisions of the BPSAA, the HSP will abide by all directives and guidelines issued by the Management Board of Cabinet that are applicable to the HSP pursuant to the BPSAA. (b) If the HSP is not subject to the procurement provisions of the BPSAA, the HSP will have a procurement policy in place that requires the acquisition of supplies, equipment or services valued at over $25,000 through a competitive process that ensures the best value for funds expended. If the HSP acquires supplies, equipment or services with the Funding it will do so through a process that is consistent with this policy.

  • Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers. 2.8.3.2 This element will be provided in MDUs and/or Multi-Tenants Units (MTUs) where either Party owns wiring all the way to the End User’s premises. Neither Party will provide this element in locations where the property owner provides its own wiring to the End User’s premises, where a third party owns the wiring to the End User’s premises.