Common use of EODUF Physical File Characteristics Clause in Contracts

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone via FTP. The EODUF messages will be intermingled among OneTone’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone for the purpose of data transmission. Where a dedicated line is required, OneTone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneTone. Additionally, all message toll charges associated with the use of the dial circuit by OneTone will be the responsibility of OneTone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneTone’s end for the purpose of data transmission will be the responsibility of OneTone. 7.2.3 If OneTone utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneTone.

EODUF Physical File Characteristics. 7.2.1 6.2.1 EODUF feed will be distributed to OneTone Aspire via Secure File Transfer Protocol (FTP). The EODUF messages will be intermingled among OneToneAspire’s ODUF Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) 175 byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Aspire for the purpose of data transmission. Where a dedicated line is required, OneTone Aspire will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Aspire will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneAspire. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Aspire will be the responsibility of OneToneAspire. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneAspire’s end for the purpose of data transmission will be the responsibility of OneToneAspire. 7.2.3 6.2.3 If OneTone Aspire utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneTone.Aspire. Version R2Q04: 09/13/04

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Credit Loans via FTP. The EODUF messages will be intermingled among OneToneCredit Loans’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Credit Loans for the purpose of data transmission. Where a dedicated line is required, OneTone Credit Loans will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Credit Loans will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneCredit Loans. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Credit Loans will be the responsibility of OneToneCredit Loans. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneCredit Loans’s end for the purpose of data transmission will be the responsibility of OneToneCredit Loans. 7.2.3 If OneTone Credit Loans utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneCredit Loans.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Airespring via FTP. The EODUF messages will be intermingled among OneToneAirespring’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Airespring for the purpose of data transmission. Where a dedicated line is required, OneTone Airespring will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Airespring will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneAirespring. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Airespring will be the responsibility of OneToneAirespring. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneAirespring’s end for the purpose of data transmission will be the responsibility of OneToneAirespring. 7.2.3 If OneTone Airespring utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneAirespring.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Telecable via FTP. The EODUF messages will be intermingled among OneToneTelecable’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Telecable for the purpose of data transmission. Where a dedicated line is required, OneTone Telecable will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Telecable will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneTelecable. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Telecable will be the responsibility of OneToneTelecable. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneTelecable’s end for the purpose of data transmission will be the responsibility of OneToneTelecable. 7.2.3 If OneTone Telecable utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneTelecable.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Easy Telephone via FTP. The EODUF messages will be intermingled among OneToneEasy Telephone’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Easy Telephone for the purpose of data transmission. Where a dedicated line is required, OneTone Easy Telephone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Easy Telephone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneEasy Telephone. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Easy Telephone will be the responsibility of OneToneEasy Telephone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneEasy Telephone’s end for the purpose of data transmission will be the responsibility of OneToneEasy Telephone. 7.2.3 If OneTone Easy Telephone utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneEasy Telephone.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Go-Tel via FTP. The EODUF messages will be intermingled among OneToneGo-Tel’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Go- Tel for the purpose of data transmission. Where a dedicated line is required, OneTone Go- Tel will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Go-Tel will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneGo-Tel. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Go-Tel will be the responsibility of OneToneGo-Tel. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneGo-Tel’s end for the purpose of data transmission will be the responsibility of OneToneGo-Tel. 7.2.3 If OneTone Go-Tel utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneGo-Tel.

EODUF Physical File Characteristics. 7.2.1 6.2.1 EODUF feed will be distributed to OneTone ▇▇▇▇▇▇▇▇ via Secure File Transfer Protocol (FTP). The EODUF messages will be intermingled among OneTone’s ODUF ▇▇▇▇▇▇▇▇’▇ Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) 175 byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone ▇▇▇▇▇▇▇▇ for the purpose of data transmission. Where a dedicated line is required, OneTone ▇▇▇▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone ▇▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneTone▇▇▇▇▇▇▇▇. Additionally, all message toll charges associated with the use of the dial circuit by OneTone ▇▇▇▇▇▇▇▇ will be the responsibility of OneTone▇▇▇▇▇▇▇▇. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneTone’s ▇▇▇▇▇▇▇▇’▇ end for the purpose of data transmission will be the responsibility of OneTone▇▇▇▇▇▇▇▇. 7.2.3 6.2.3 If OneTone ▇▇▇▇▇▇▇▇ utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneTone.▇▇▇▇▇▇▇▇. Version R2Q04: 09/13/04

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Network PTS via FTP. The EODUF messages will be intermingled among OneToneNetwork PTS’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Network PTS for the purpose of data transmission. Where a dedicated line is required, OneTone Network PTS will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Network PTS will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneNetwork PTS. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Network PTS will be the responsibility of OneToneNetwork PTS. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneNetwork PTS’s end for the purpose of data transmission will be the responsibility of OneToneNetwork PTS. 7.2.3 If OneTone Network PTS utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneNetwork PTS.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone MTG via FTP. The EODUF messages will be intermingled among OneToneMTG’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth AT&T determines the Secure FTP mailbox FTPmailbox is nearing capacity levels, BellSouth may AT&Tmay move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth AT&T and OneTone MTG for the purpose of data transmission. Where a dedicated line is required, OneTone MTG will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone AT&T. MTG will also be responsible for any charges associated with this line. Equipment required on the BellSouth AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- adial-up facility is required, dial circuits will be installed in the BellSouth AT&T data center by BellSouth AT&T and the associated charges assessed to OneToneMTG. Additionally, all message toll charges associated chargesassociated with the use of the dial circuit ciurcit by OneTone will be the MTGwill bethe responsibility of OneToneMTG. Associated equipment on the BellSouth AT&T end, including a modemamodem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneMTG’s end for the purpose of data transmission dataatnrsmission will be the responsibility of OneToneMTG. 7.2.3 If OneTone MTG utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneMTG.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone ▇▇▇▇▇▇ via FTP. The EODUF messages will be intermingled among OneTone’s ▇▇▇▇▇▇’▇ ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone SanTel for the purpose of data transmission. Where a dedicated line is required, OneTone SanTel will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone SanTel will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneTone▇▇▇▇▇▇. Additionally, all message toll charges associated with the use of the dial circuit by OneTone ▇▇▇▇▇▇ will be the responsibility of OneTone▇▇▇▇▇▇. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneTone’s ▇▇▇▇▇▇’▇ end for the purpose of data transmission will be the responsibility of OneToneSanTel. 7.2.3 If OneTone SanTel utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneSanTel.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Telephone One via FTP. The EODUF messages will be intermingled among OneToneTelephone One’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Telephone One for the purpose of data transmission. Where a dedicated line is required, OneTone Telephone One will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Telephone One will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneTelephone One. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Telephone One will be the responsibility of OneToneTelephone One. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneTelephone One’s end for the purpose of data transmission will be the responsibility of OneToneTelephone One. 7.2.3 If OneTone Telephone One utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneTelephone One.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone AllSouth Phone via FTP. The EODUF messages will be intermingled among OneToneAllSouth Phone’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone AllSouth Phone for the purpose of data transmission. Where a dedicated line is required, OneTone AllSouth Phone will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone AllSouth Phone will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneAllSouth Phone. Additionally, all message toll charges associated with the use of the dial circuit by OneTone AllSouth Phone will be the responsibility of OneToneAllSouth Phone. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneAllSouth Phone’s end for the purpose of data transmission will be the responsibility of OneToneAllSouth Phone. 7.2.3 If OneTone AllSouth Phone utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneAllSouth Phone.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Gildra’s via FTP. The EODUF messages will be intermingled among OneToneGildra’s’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Gildra’s for the purpose of data transmission. Where a dedicated line is required, OneTone Gildra’s will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Gildra’s will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneGildra’s. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Gildra’s will be the responsibility of OneToneGildra’s. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneGildra’s’s end for the purpose of data transmission will be the responsibility of OneToneGildra’s. 7.2.3 If OneTone Gildra’s utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneGildra’s.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Rent-A-Line via FTP. The EODUF messages will be intermingled among OneToneRent-A-Line’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Rent-A-Line for the purpose of data transmission. Where a dedicated line is required, OneTone Rent-A-Line will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Rent-A-Line will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneRent-A-Line. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Rent-A-Line will be the responsibility of OneToneRent-A-Line. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneRent-A-Line’s end for the purpose of data transmission will be the responsibility of OneToneRent-A-Line. 7.2.3 If OneTone Rent-A-Line utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneRent-A-Line.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Title Pawn via FTP. The EODUF messages will be intermingled among OneToneTitle Pawn’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Title Pawn for the purpose of data transmission. Where a dedicated line is required, OneTone Title Pawn will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Title Pawn will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneTitle Pawn. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Title Pawn will be the responsibility of OneToneTitle Pawn. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneTitle Pawn’s end for the purpose of data transmission will be the responsibility of OneToneTitle Pawn. 7.2.3 If OneTone Title Pawn utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneTitle Pawn.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to OneTone Excel PCHP via FTP. The EODUF messages will be intermingled among OneToneExcel PCHP’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If BellSouth determines the Secure FTP mailbox is nearing capacity levels, BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and OneTone Excel PCHP for the purpose of data transmission. Where a dedicated line is required, OneTone Excel PCHP will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. OneTone Excel PCHP will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to OneToneExcel PCHP. Additionally, all message toll charges associated with the use of the dial circuit by OneTone Excel PCHP will be the responsibility of OneToneExcel PCHP. Associated equipment on the BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on OneToneExcel PCHP’s end for the purpose of data transmission will be the responsibility of OneToneExcel PCHP. 7.2.3 If OneTone Excel PCHP utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of OneToneExcel PCHP.