Common use of EODUF Physical File Characteristics Clause in Contracts

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse via FTP. The EODUF messages will be intermingled among Syniverse’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse for the purpose of data transmission. Where a dedicated line is required, Syniverse will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to Syniverse. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse will be the responsibility of Syniverse. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Syniverse’s end for the purpose of data transmission will be the responsibility of Syniverse. 7.2.3 If Syniverse utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of Syniverse.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Covad via FTP. The EODUF messages will be intermingled among Syniverse▇▇▇▇▇’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Covad for the purpose of data transmission. Where a dedicated line is required, Syniverse ▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Covad will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseCovad. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Covad will be the responsibility of SyniverseCovad. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseCovad’s end for the purpose of data transmission will be the responsibility of SyniverseCovad. 7.2.3 If Syniverse Covad utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseCovad.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Global Connection via FTP. The EODUF messages will be intermingled among SyniverseGlobal Connection’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Global Connection for the purpose of data transmission. Where a dedicated line is required, Syniverse Global Connection will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Global Connection will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseGlobal Connection. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Global Connection will be the responsibility of SyniverseGlobal Connection. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseGlobal Connection’s end for the purpose of data transmission will be the responsibility of SyniverseGlobal Connection. 7.2.3 If Syniverse Global Connection utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseGlobal Connection.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse QuantumShift via FTP. The EODUF messages will be intermingled among SyniverseQuantumShift’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T BellSouth determines the Secure FTP mailbox is nearing capacity levels, AT&T BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T BellSouth and Syniverse QuantumShift for the purpose of data transmission. Where a dedicated line is required, Syniverse QuantumShift will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse BellSouth. QuantumShift will also be responsible for any charges associated with this line. Equipment required on the AT&T BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the AT&T BellSouth data center by AT&T BellSouth and the associated charges assessed to SyniverseQuantumShift. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse QuantumShift will be the responsibility of SyniverseQuantumShift. Associated equipment on the AT&T BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseQuantumShift’s end for the purpose of data transmission will be the responsibility of SyniverseQuantumShift. 7.2.3 If Syniverse QuantumShift utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseQuantumShift.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse ▇▇▇▇▇▇▇▇ Communications via FTP. The EODUF messages will be intermingled among Syniverse▇▇▇▇▇▇▇▇ Communications’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T BellSouth determines the Secure FTP mailbox is nearing capacity levels, AT&T BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T BellSouth and Syniverse ▇▇▇▇▇▇▇▇ Communications for the purpose of data transmission. Where a dedicated line is required, Syniverse ▇▇▇▇▇▇▇▇ Communications will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse BellSouth. ▇▇▇▇▇▇▇▇ Communications will also be responsible for any charges associated with this line. Equipment required on the AT&T BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T BellSouth data center by AT&T BellSouth and the associated charges assessed to Syniverse▇▇▇▇▇▇▇▇ Communications. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse ▇▇▇▇▇▇▇▇ Communications will be the responsibility of Syniverse▇▇▇▇▇▇▇▇ Communications. Associated equipment on the AT&T BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on Syniverse▇▇▇▇▇▇▇▇ Communications’s end for the purpose of data transmission will be the responsibility of Syniverse▇▇▇▇▇▇▇▇ Communications. 7.2.3 If Syniverse ▇▇▇▇▇▇▇▇ Communications utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of Syniverse▇▇▇▇▇▇▇▇ Communications.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Serenity via FTP. The EODUF messages will be intermingled among SyniverseSerenity’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Serenity for the purpose of data transmission. Where a dedicated line is required, Syniverse Serenity will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Serenity will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseSerenity. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Serenity will be the responsibility of SyniverseSerenity. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseSerenity’s end for the purpose of data transmission will be the responsibility of SyniverseSerenity. 7.2.3 If Syniverse Serenity utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseSerenity.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Home Phone Services via FTP. The EODUF messages will be intermingled among SyniverseHome Phone Services’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Home Phone Services for the purpose of data transmission. Where a dedicated line is required, Syniverse Home Phone Services will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Home Phone Services will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseHome Phone Services. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Home Phone Services will be the responsibility of SyniverseHome Phone Services. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseHome Phone Services’s end for the purpose of data transmission will be the responsibility of SyniverseHome Phone Services. 7.2.3 If Syniverse Home Phone Services utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseHome Phone Services.

EODUF Physical File Characteristics. 7.2.1 6.2.1 EODUF feed will be distributed to Syniverse Express Connection via Secure File Transfer Protocol (FTP). The EODUF messages will be intermingled among SyniverseExpress Connection’s ODUF Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) 175 byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T BellSouth determines the Secure FTP mailbox is nearing capacity levels, AT&T BellSouth may move the customer to CONNECT:Direct file delivery. 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between AT&T BellSouth and Syniverse Express Connection for the purpose of data transmission. Where a dedicated line is required, Syniverse Express Connection will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse BellSouth. Express Connection will also be responsible for any charges associated with this line. Equipment required on the AT&T BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T BellSouth data center by AT&T BellSouth and the associated charges assessed to SyniverseExpress Connection. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Express Connection will be the responsibility of SyniverseExpress Connection. Associated equipment on the AT&T BellSouth end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, Version R2Q04: 09/13/04 including modems and software, that is required on SyniverseExpress Connection’s end for the purpose of data transmission will be the responsibility of SyniverseExpress Connection. 7.2.3 6.2.3 If Syniverse Express Connection utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseExpress Connection.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Communication Lines via FTP. The EODUF messages will be intermingled among SyniverseCommunication Lines’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a ina non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will Itwill be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may AT&Tmay move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Communication Lines for the purpose of data transmission. Where a dedicated line is required, Syniverse Communication Lines will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Communication Lines will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- adial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseCommunication Lines. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Communication Lines will be the responsibility of SyniverseCommunication Lines. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseCommunication Lines’s end for the purpose of data transmission will be the responsibility of SyniverseCommunication Lines. 7.2.3 If Syniverse Communication Lines utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseCommunication Lines.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse TrustedNet via FTP. The EODUF messages will be intermingled among SyniverseTrustedNet’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse TrustedNet for the purpose of data transmission. Where a dedicated line is required, Syniverse TrustedNet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse TrustedNet will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseTrustedNet. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse TrustedNet will be the responsibility of SyniverseTrustedNet. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseTrustedNet’s end for the purpose of data transmission will be the responsibility of SyniverseTrustedNet. 7.2.3 If Syniverse TrustedNet utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseTrustedNet.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Covad via FTP. The EODUF messages will be intermingled among SyniverseCovad’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Covad for the purpose of data transmission. Where a dedicated line is required, Syniverse Covad will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Covad will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseCovad. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Covad will be the responsibility of SyniverseCovad. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseCovad’s end for the purpose of data transmission will be the responsibility of SyniverseCovad. 7.2.3 If Syniverse Covad utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseCovad.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Phone Club Corporation via FTP. The EODUF messages will be intermingled among SyniversePhone Club Corporation’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Phone Club Corporation for the purpose of data transmission. Where a dedicated line is required, Syniverse Phone Club Corporation will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Phone Club Corporation will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- dial-up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniversePhone Club Corporation. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Phone Club Corporation will be the responsibility of SyniversePhone Club Corporation. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniversePhone Club Corporation’s end for the purpose of data transmission will be the responsibility of SyniversePhone Club Corporation. 7.2.3 If Syniverse Phone Club Corporation utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniversePhone Club Corporation.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Express Paging via FTP. The EODUF messages will be intermingled among SyniverseExpress Paging’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Express Paging for the purpose of data transmission. Where a dedicated line is required, Syniverse Express Paging will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Express Paging will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseExpress Paging. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Express Paging will be the responsibility of SyniverseExpress Paging. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseExpress Paging’s end for the purpose of data transmission will be the responsibility of SyniverseExpress Paging. 7.2.3 If Syniverse Express Paging utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseExpress Paging.

EODUF Physical File Characteristics. 7.2.1 EODUF feed will be distributed to Syniverse Talk for Less via FTP. The EODUF messages will be intermingled among SyniverseTalk for Less’s ODUF messages. The EODUF will be a variable block format. The data on the EODUF will be in a non-compacted EMI format (one hundred seventy-five (175) byte format plus modules). It will be created on a daily basis Monday through Friday except holiday. If AT&T determines the Secure FTP mailbox is nearing capacity levels, AT&T may move the customer to CONNECT:Direct file delivery. 7.2.2 Data circuits (private line or dial-up) may be required between AT&T and Syniverse Talk for Less for the purpose of data transmission. Where a dedicated line is required, Syniverse Talk for Less will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with AT&T. Syniverse Talk for Less will also be responsible for any charges associated with this line. Equipment required on the AT&T end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on an individual case basis. Where a dial- up facility is required, dial circuits will be installed in the AT&T data center by AT&T and the associated charges assessed to SyniverseTalk for Less. Additionally, all message toll charges associated with the use of the dial circuit by Syniverse Talk for Less will be the responsibility of SyniverseTalk for Less. Associated equipment on the AT&T end, including a modem, will be negotiated on an individual case basis between the Parties. All equipment, including modems and software, that is required on SyniverseTalk for Less’s end for the purpose of data transmission will be the responsibility of SyniverseTalk for Less. 7.2.3 If Syniverse Talk for Less utilizes FTP for data file transmission, purchase of the FTP software will be the responsibility of SyniverseTalk for Less.