FAA Procedures Clause Samples

FAA Procedures. (a) The FAA is authorized to make findings of compliance to 14 CFR Parts 34 and 36. (b) Upon request to EASA, and after mutual agreement, the FAA may authorize environmental findings of compliance to be performed by EASA on behalf of the FAA. For tests conducted prior to a TC or STC application being made to the FAA, FAA may accept EASA-approved noise and emissions certification compliance data, provided the data meets the applicable FAA regulations, guidance, and policy material. Note: None of the bilateral airworthiness agreements listed in Attachment 1 of the Agreement have within their scope the approval of compliance with environmental standards. (c) In the absence of any authorization to EASA, the FAA process for environmental testing and approvals, includes the following: (1) Environmental (noise, fuel venting and exhaust emissions) certification compliance demonstration plans must be submitted to the FAA for review, comment, and subsequent approval prior to undertaking certification testing. (2) Information and data must 2.
View SourceView Similar (5)
FAA Procedures. [Reserved.] 3.0.1.4.2
View SourceView Similar (4)
FAA Procedures. (a) The FAA is authorized to make findings of compliance to 14 CFR Parts 34 and 36 based upon FAA- witnessed tests conducted in accordance with FAA-approved test plans. FAA shall review and approve all compliance demonstration plans and reports submitted via the EASA. FAA environmental requirements are documented in FAA Order 8110.4,
View SourceView Similar (2)
FAA Procedures. (a) For a product designed in Italy and validated in the United States, the FAA must make all findings of compliance to 14 CFR Parts 34 and 36 based upon FAA witnessed tests, conducted in accordance with FAA-approved test plans. The FAA will review and approve all data and compliance demonstration reports submitted via ENAC. (b) The FAA process for environmental testing and approvals includes the following: (1) Environmental (noise, fuel venting and exhaust emissions) certification compliance demonstration plans must be submitted to the FAA for review, comment and subsequent approval prior to undertaking certification testing.
View Source
FAA Procedures. (a) For a product designed in Sweden and validated in the United States, the FAA must make all findings of compliance to 14 CFR Parts 34 and 36 based upon FAA witnessed tests, conducted in accordance with FAA-approved test plans. The FAA will review and approve all data and compliance demonstration reports submitted via the LFV. (b) The FAA process for environmental testing and approvals includes the following: (1) Environmental (noise, fuel venting and exhaust emissions) certification compliance demonstration plans must be submitted to the FAA for review, comment and subsequent approval prior to undertaking certification testing.
View Source

Related to FAA Procedures

  • New Procedures New procedures as to who shall provide certain of these services in Section 1 may be established in writing from time to time by agreement between the Fund and the Transfer Agent. The Transfer Agent may at times perform only a portion of these services and the Fund or its agent may perform these services on the Fund's behalf;

  • Safety Procedures The Contractor shall: (a) comply with all applicable safety regulations according to Attachment H; (b) take care for the safety of all persons entitled to be on the Site; (c) use reasonable efforts to keep the Site and Works clear of unnecessary obstruction so as to avoid danger to these persons; (d) provide fencing, lighting, guarding and watching of the Works until completion and taking over under clause 10 [Employer's Taking Over]; and (e) provide any Temporary Works (including roadways, footways, guards and fences) which may be necessary, because of the execution of the Works, for the use and protection of the public and of owners and occupiers of adjacent land.

  • Billing Procedures The Supporting Party will bill the Protecting Party for actual costs incurred for Assistance by Hire. Reimbursements will be limited to the provisions of the Agreement and the applicable OP, regardless of whether or not it is authorized on the Resource Order or other documentation produced by the incident. Reimbursable costs may include transportation, salary, overtime, per diem and other approved expenses of supporting agency personnel. Rates and conditions of use for the equipment and personnel are documented in the OP. Parties shall submit a bill within 90 days of the incident. Parties must use their own invoice form for billing under this Agreement to avoid any confusion with other services that may have been ordered under other agreements. Invoices must identify Supporting Party’s name, address, and Taxpayer Identification Number (Department only), fire name, order and request number, and bill number and amount. Invoice supporting documentation must include description of services performed, period of services performed, and any applicable cost share agreements. Supporting documentation will itemize details of billing, listing personnel, equipment, travel and per diem, aircraft, supplies and purchases as approved in the attached OP. It will also include itemized deductions for maintenance and repair of equipment. Department invoices will include “Record of Activities” (FSLA-5) and U.S. Forest Service invoices will include transaction register. Invoices for services under this agreement must be sent to: ▇▇▇▇▇ ▇▇▇▇▇▇▇, FFMO ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Telephone: ▇▇▇-▇▇▇-▇▇▇▇ FAX: ▇▇▇-▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇▇▇▇@▇▇.▇▇▇.▇▇ ▇▇▇ ▇▇▇▇▇▇▇▇, FIRE CHIEF ▇.▇. ▇▇▇ ▇▇▇ ▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Telephone: ▇▇▇-▇▇▇-▇▇▇▇ FAX: ▇▇▇-▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇@▇▇▇▇▇▇▇▇.▇▇▇ All bills will have a payment due date 30 days upon receipt. Contested ▇▇▇▇▇▇▇▇: Written notice that a bill is contested will be mailed to the Party within 30 days of receipt of the invoice and will fully explain the contested items. Contested items should be resolved no later than 60 days following receipt of the written notice. Parties are responsible for facilitating resolution of contested ▇▇▇▇▇▇▇▇. Billing requirements and rates are documented in the attached OP.

  • Funding Procedures Not later than 11:00 a.m. (Boston time) on ------------------ the proposed Drawdown Date of any Revolving Credit Loans, each of the Banks will make available to the Agent, at the Agent's Head Office, in immediately available funds, the amount of such Bank's Commitment Percentage of the amount of the requested Revolving Credit Loans. Upon receipt from each Bank of such amount, and upon receipt of the documents required by (S)(S)12 and 13 and the satisfaction of the other conditions set forth therein, to the extent applicable, the Agent will make available to the Borrower the aggregate amount of such Revolving Credit Loans made available to the Agent by the Banks. The failure or refusal of any Bank to make available to the Agent at the aforesaid time and place on any Drawdown Date the amount of its Commitment Percentage of the requested Revolving Credit Loans shall not relieve any other Bank from its several obligation hereunder to make available to the Agent the amount of such other Bank's Commitment Percentage of any requested Revolving Credit Loans.

  • Loan Procedures (a) Except for Same Day Loans funded under Section 2.2(b), the Company shall give written notice or telephonic notice (followed immediately by written confirmation thereof) to the Agent of each proposed borrowing not later than 10:00 A.M., Detroit time, at least two Business Days prior to the proposed date of such borrowing. Each such notice shall be effective upon receipt by the Agent, shall be irrevocable and shall specify the date and amount of the proposed borrowing. Within one Business Day after receipt of such notice, the Agent shall advise each Lender thereof. Not later than 1:00 P.M., Detroit time, on the date of a proposed borrowing, each Lender shall provide the Agent at the office specified by the Agent with immediately available funds covering such Lender’s Pro Rata Share of such borrowing and, so long as the Agent has not received written notice that the conditions precedent set forth in Section 10 with respect to such borrowing have not been satisfied, the Agent shall pay over the funds received by the Agent to the Company on the requested borrowing date. Each borrowing shall be on a Business Day. (b) In addition to borrowings under Section 2.2(a), the Company may give written or electronic notice or telephonic notice (followed immediately by written or electronic confirmation thereof) to the Agent of a proposed Same Day Loan not later than 11:00 A.M., Detroit time, on any Business Day that the Company has not made (and will not make) a Same Day Prepayment. Each such notice shall be effective upon receipt by the Agent, shall be irrevocable and shall specify the amount of the proposed Same Day Loan, which amount may not exceed Fifteen Million and 00/100 Dollars ($15,000,000.00) for any particular Business Day. By 11:30 A.M., Detroit time, on the Business Day that the Agent receives a notice of a proposed Same Day Loan, the Agent shall advise each Lender thereof. Not later than 3:00 P.M., Detroit time, on the Business Day that the Agent receives a notice of a proposed Same Day Loan, each Lender shall provide the Agent at the office specified by the Agent with immediately available funds covering such Lender’s Pro Rata Share of such Same Day Loan and, so long as the Agent has not received written notice from a Lender (before 3:00 P.M., Detroit time, on the Business Day that the Agent receives a notice of a proposed Same Day Loan) that the conditions precedent set forth in Section 10 with respect to such borrowing have not been satisfied, the Agent shall pay over the funds received by the Agent by a federal wire transfer to the Company’s bank account, which federal wire transfer must be initiated by the Agent on or before 4:00 P.M., Detroit time, on the Business Day that the Agent receives a notice of the proposed Same Day Loan. Each Same Day Loan for which the above requirements are satisfied shall be treated as being made by the Lenders (and shall be part of the Revolving Outstandings) on the Business Day that the Agent initiates the federal wire transfer, even if the Company cannot confirm the receipt of such funds until the next Business Day. Each Same Day Loan must be requested (and shall be made) on a Business Day. The Company may not request a Same Day Loan on any Business Day if the Company has notified the Agent that the Company is making a Same Day Prepayment on such Business Day. The Company may request a Same Day Loan on the same Business Day that it has previously requested a borrowing under Section 2.2(a) and/or on the same Business Day for which the Company has notified the Agent of a voluntary prepayment under Section 6.2(a) and such Same Day Loan shall be funded in addition to, separately from and without any netting for such other borrowing and/or voluntary prepayment. (c) All borrowings and repayments of Loans shall be effected in accordance with each Lender’s Pro Rata Share.