Disclosure and Use 20.2.1 Each Receiving Party agrees that, from and after the Effective Date:
(a) all such Proprietary Information communicated or discovered, whether before, on or after the Effective Date, in connection with this Agreement shall be held in confidence to the same extent as such Receiving Party holds its own confidential information; provided, that such Receiving Party shall not use less than a reasonable standard of care in maintaining the confidentiality of such information;
(b) it will not, and it will not permit any of its employees, contractors, consultants, agents or affiliates to disclose such Proprietary Information to any other third person;
(c) it will disclose Proprietary Information only to those of its employees, contractors, consultants, agents and affiliates who have a need for it in connection with the use or provision of services required to fulfill this Agreement;
(d) it will, and will cause each of its employees, contractors, consultants, agents and affiliates to use such Proprietary Information only to effectuate the terms and conditions of this Agreement and for no other purpose;
(e) it will cause each of its affiliates to execute individual confidentiality agreements containing the same restrictions as this Article XX; and
(f) it will, and will cause each of its employees, contractors, consultants, agents and affiliates, to use such Proprietary Information to create only that Derivative Information necessary for such Receiving Party's compliance with Applicable Law or its performance under the terms of this Agreement.
20.2.2 Any Receiving Party so disclosing Proprietary Information to its employees, contractors, consultants, agents or affiliates shall be responsible for any breach of this Agreement by any of its employees, contractors, consultants, agents or affiliates and such Receiving Party agrees to use its reasonable efforts to restrain its employees, contractors, consultants, agents or affiliates from any prohibited or unauthorized disclosure or use of the Proprietary Information and to assist the Disclosing Party in its efforts to protect such information from disclosure. Each Receiving Party making such disclosure shall notify the Disclosing Party as soon as possible if it has knowledge of a breach of this Agreement in any material respect.
20.2.3 Proprietary Information shall not be reproduced by any Receiving Party in any form except to the extent (i) necessary to comply with the provisions of Section 20.3 and (ii) reasonably necessary to perform its obligations under this Agreement. All such reproductions shall bear the same copyright and proprietary rights notices as are contained in or on the original.
Manufacture and Supply 3.1 During the Term, MSX shall manufacture and supply RB’s requirements of the Products on an exclusive basis and shall manufacture the Products:
3.1.1 in accordance with cGMP, the Product Specification and the processes set out in the Quality Agreement;
3.1.2 in accordance with any legislation applicable to the manufacture of the Products (including without limitation legislation and standards applicable to environmental protection such as waste disposal and any legislation or regulations regarding ePedigree requirements as and when enforced as further described in Clause 3.13); and
3.1.3 subject to Clause 3.3 below, at the Manufacturing Site.
3.2 MSX shall not:
3.2.1 use any site other than the Manufacturing Site for the manufacture of the Products (including the process, plant or equipment used in the manufacture of the Products), without the prior written consent of RB, such consent not to be unreasonably withheld, conditioned or delayed, and RB to cooperate reasonably with MSX in respect of any proposals to utilise new manufacturing sites; and
3.2.2 at any time during the Term carry out any activities that MSX actually knows or should reasonably know shall prejudice the quality, safety or efficacy of the Products.
3.3 The parties acknowledge that MSX intends to use its facility located at [***] as a manufacturing site for the manufacture of the Products, and RB hereby consents to such site transfer subject to RB conducting a quality review of the [***] site in accordance with Clause 3.2.1.
3.4 MSX shall:
3.4.1 only use API supplied from RB in the manufacture of the Products;
3.4.2 ensure that all personnel employed by MSX in the manufacture of the Products are suitably trained, experienced and competent for their respective functions; and
3.4.3 monitor, account for and keep RB regularly informed of the usage and waste of API and MSX shall ensure that in the manufacture of the Products MSX does not waste any more than a set percentage of the API to be determined by the parties in writing acting reasonably and assuming efficient manufacture of the Products.
3.5 Subject to Clause 7.12, MSX shall be entitled to obtain the Raw Materials and other components for the manufacture and delivery of the Products from qualified suppliers of its own choosing. In the event that MSX obtains Raw Materials from a third party supplier, MSX shall notify RB and MSX shall consider in good faith (but not be bound by) any reasonable objection by RB timely delivered to MSX as to the qualification of such third party supplier; provided, however, that (subject to Clause 7.12) RB shall have no right to object to any financial arrangement reached between MSX and such third party supplier, which shall be determined at the sole discretion of MSX. MSX shall ensure that such Raw Materials and other components are of the requisite standard to comply with the Product Specification and any applicable laws, codes of practice and regulations and the terms of this Agreement. Periodically, MSX will share with RB a list of all suppliers, so RB may voice to MSX any concerns in connection with them.
3.6 Unless otherwise agreed with RB in writing and save for the fact that RB shall be responsible for cartoning the Products once delivered to RB, MSX shall operate on a full service basis (meaning that MSX shall be responsible for the purchase of all Raw Materials (except for API which shall be supplied by RB in accordance with Clause 4.3 hereof) and the supply of the Products in individual sachet form to RB or its nominee). RB shall only be invoiced for the Cost of Goods Price as set out in Schedule One which shall be inclusive of such costs and expenses, including FCA (Incoterms 2000) delivery.
3.7 For the purposes of ensuring that RB has the full protection of its business interests and the ongoing benefit of its and any of its Affiliates’ Intellectual Property Rights, and subject to applicable laws, MSX covenants with RB that during the Term it will not, so far as it is aware, without the prior written consent of RB, whether directly or indirectly and whether alone or in conjunction with or on behalf of any other person and whether as principal, shareholder, director, employee, agent, consultant, partner or otherwise:
3.7.1 subject to Clause 3.9, canvass, solicit or approach, or cause to be canvassed, solicited or approached, any person for orders of products within the Field who RB informs MSX in writing is or was at any time during the Term:
3.7.1.1 negotiating with RB or any of its Affiliates for the supply by RB or any of its Affiliates of the Products; or
3.7.1.2 an actual customer of RB or any of its Affiliates in respect of the Products;
3.7.2 interfere, or seek to interfere, with the continuation of supplies to RB or any of its Affiliates from any supplier who RB informs MSX in writing has been supplying goods to RB or any of its Affiliates at any time during the Term if such interference causes or would cause that supplier to cease supplying, or materially reduce its supply of those goods; and
3.7.3 directly solicit or entice, or endeavour to solicit or entice, away from RB or its Affiliates, any person employed in a managerial, supervisory, technical or sales capacity by, or who is or who was a consultant to, RB or its Affiliates at a time during the Term; provided, that, general solicitations not directed to a specific individual shall not constitute a breach hereof; and
3.7.4 develop (subject to Clause 3.9), manufacture, market or sell any product within the Field.
3.8 For the purposes of ensuring that MSX has the full protection of its business interests and the ongoing benefit of its and any of its Affiliates’ Intellectual Property Rights, and subject to applicable laws, RB covenants with MSX that during the Term it will not, without the prior written consent of MSX whether directly or indirectly and whether alone or in conjunction with or on behalf of any other person and whether as principal, shareholder, director, employee, agent, consultant, partner or otherwise:
3.8.1 subject to Clause 6.5 and Clause 3.9, canvass, solicit or approach, or cause to be canvassed, solicited or approached; any person for the manufacture of the Products in the Field;
3.8.2 interfere, or seek to interfere, with the continuation of supplies or Raw Materials to MSX or any of its Affiliates from any supplier who has been supplying supplies or Raw Materials to MSX or any of its Affiliates at any time during the Term if such interference causes or would cause that supplier to cease supplying, or materially reduce its supply of those goods;
3.8.3 directly solicit or entice, or endeavour to solicit or entice, away from MSX or its Affiliates, any person employed in a managerial, supervisory, technical or sales capacity by, or who is or who was a consultant to, MSX or its Affiliates at a time during the Term; provided, that, general solicitations not directed to a specific individual shall not constitute a breach hereof; and
3.8.4 develop (subject to Clause 3.9), manufacture, make, have made, market or sell Products outside the Field.
3.9 Each of RB and MSX agrees that at least one year prior to the expiration of the Term it will notify the other of its intent to renew or not to renew this Agreement. In the event that either party elects not to renew this Agreement upon the expiration of the Term, notwithstanding the restriction contained in Clauses 3.7.1 and 3.7.4 as to MSX and Clauses 3.8.1 and 3.8.4 as to RB, during the last twelve (12) months of the Term of this Agreement: (i) RB shall have the right to develop Products outside the Field and to canvass, solicit and approach, and cause to be canvassed, solicited and approached, any person for the manufacture of the Products in the Field to commence after the expiration of the Term, and (ii) MSX shall have the right to develop products in the Field and to canvass, solicit and approach, and cause to be canvassed, solicited and approached, any person for the manufacture of products in the Field to commence after the expiration of the Term. Notwithstanding anything to the contrary contained in this Agreement, no notice by either party under this Clause 3.9 shall reduce or impair the respective obligations of each of the parties under this Agreement for the remainder of the Term except as set forth in this Clause 3.9.
3.10 At the option of RB delivered by written notice to MSX at least ninety (90) days prior to the expiration of the Term, MSX shall continue to supply the Products to MSX in accordance with the terms and conditions of this Agreement for a period determined by RB not to exceed six (6) months after the expiration of the Term.
3.11 The parties agree to use their best efforts to implement as soon as possible (including prior to Launch, or if this is not possible, as soon as possible thereafter) an electronic pedigree system in connection with the manufacture and supply of the Products which would satisfy the expected legal requirements of the E-Pedigree regulations of the State of California for the electronic tracking and tracing of prescription drugs through the supply chain, California Business and Professions Code § 4034 et seq. (the “E-Pedigree Regulations”) (currently scheduled to become effective as of January 1, 2011) and in accordance with the Serialized Product Specifications (as defined below). The parties agreement set forth in the preceding sentence shall apply to the manufacture and supply of the Products throughout the Territory; provided that such manufacture and/or supply, as the case may be, is not in violation of any applicable law, code of practice or regulation in any country in the ROW in which instance it shall not apply in such country in the ROW. To that end, RB intends to purchase, or have purchased, technology (including equipment and software) from a third party manufacturer (the “E-Pedigree Manufacturer”) which consists of a pouch image acquisition and collating system and affixes a unique serialization identifier on the packaging of each saleable unit of the Product/ Part of such technology will be installed at RB’s third party packager of the Product (the “Packager Serialization Technology”) and part of such technology will be purchased by and installed at the facility of MSX’s third party Foil supplier (the “Foil Supplier”) for the Product (the “Foil Serialization Technology”) (the Foil Serialization Technology together with the Packager Serialization Technology, shall collectively be referred to as the “Serialization Technology”). The specifications for serialization of the Product using the Foil Serialization Technology (the “Serialized Product Specifications”) are set forth in Schedule Four Part A.1 and shall not be modified without the prior approval of RB. RB acknowledges that the Foil Serialization Technology is newly developed by the E-Pedigree Manufacturer and has never before been installed, tested, or validated by the E-Pedigree Manufacturer and, as a result, the parties are at the time of signing this Agreement unable to guarantee the performance of the Foil Serialization Technology or the effectiveness, value, safety, merchantability or fitness for any particular purpose of the Foil Serialization Technology, or any part thereof, or its impact on the manufacture or supply of the Products under this Agreement. MSX agrees to coordinate the purchase, installation, testing, validation and qualification of the Foil Serialization Technology by the Foil Supplier and to use its best efforts to ensure that the Foil Serialization Technology is purchased, installed, tested, validated and qualified, in order to enable MSX to manufacture and supply the Products in accordance with the Product Specifications (the “Serialized Products”) for Launch (or if this is not possible as soon as soon as possible thereafter). Thereafter MSX shall manufacture and supply the Serialized Product in accordance with the Serialized Product Specifications subject to the following conditions, which conditions shall be and remain in effect only until such time as (i) MSX shall be required by state law to comply with the E-Pedigree Regulations, or be required by federal law to comply with a comparable electronic pedigree prescription drug supply chain tracking and tracing system, in connection with the manufacture and supply by MSX of Serialized Products under this Agreement (the “Effective E-Pedigree Regulations”) in accordance with the provision of Clause 3.13 or (ii) MSX has complied with its obligations under Clause 3.14 and successfully manufactured such volume of Serialized Products (as specified in Clause 3.14) in accordance with the Serialized Product Specification such that MSX shall thereon be responsible for ensuring all Products produced under this Agreement comply with the Serialized Product Specifications (and MSX shall no longer be able to produce to the Non-Serialized Product Specifications (as defined below)), whichever is the earlier:
3.11.1 In the event that the Foil Serialization Technology fails or causes a material adverse impact on the manufacture and supply of the Film or the Products or the timely delivery of same, RB and MSX agree to suspend the use of the Serialization Technology in the manufacture and supply of the Product until the cause of such material adverse impact has been cured or the parties agree in writing to abandon the Serialization Technology, and MSX shall thereafter resume the manufacture and supply of the Products which meet the Product Specifications not including the Serialized Product Specifications, (the “Non-Serialized Product Specifications”) in accordance with the terms of this Agreement. MSX shall promptly notify RB upon becoming aware of any such failure or material adverse impact. During the period while MSX is manufacturing and supplying the Product (including any Serialized Product or Non-Serialized Product) under this Clause 3.11, MSX shall arrange with the Foil Supplier to maintain an appropriate rolling amount of inventory of Foil (the “Foil Stock”) which is reasonably anticipated as necessary to avoid any material delay In the manufacture and supply of Product in compliance (with the Non-Serialized Product Specifications required as a result of such failure or material adverse impact. RB shall reimburse MSX for the cost of any unused Foil Stock providing that MSX has used reasonable efforts to ensure such unused Foil waste is kept to a minimum;
3.11.2 MSX shall bear no cost for the purchase, installation, implementation, testing, validation or qualification of the Serialization Technology and RB agrees that the Cost of Goods Price shall be simultaneously increased to reflect any and all direct increases incurred by MSX (without mark-up thereof by MSX and based upon supporting documentation from MSX) during the Term in the purchase of Foil manufactured using the Foil Serialization Technology (the “Serialized Foil”), whether as an increase in the cost of purchase of the Serialized Foil and/or as an amortization charge by the Foil Supplier for the purchase, installation, implementation, testing, validation, and/or qualification of the Serialization Technology. MSX estimates that the Cost of Goods Price will be initially increased by the sum of (i) $[***] per unit of Product for the cost associated with the purchase by MSX of the Serialized Foil plus (ii) $[***] per unit of Product for the amortized cost of purchasing the Foil Serialization Technology by the Foil Supplier based upon the purchase by MSX of Serialized Foil required to make [***] of Serialized Products (a total estimated initial cost increase per unit of Product of $[***]). The parties agree that if the Cost of Goods Price is initially increased for the amortization of the cost of purchasing the Foil Serialization Technology by the Foil Supplier, when such cost is fully amortized by the Foil Supplier, or if RB has otherwise fully paid MSX or the Foil Supplier all sums due to the Foil Supplier in respect of the Foil Serialization Technology, the Cost of Goods Price per unit of Serialized Product would thereafter be reduced by an amount equal to any such increase in the Cost of Goods Price for the amortized cost of purchasing the Foil Serialization Technology by the Foil Supplier. Such estimates shall not be binding on MSX and shall be ad