Flight Operations Training Clause Samples

POPULAR SAMPLE Copied 1 times
Flight Operations Training. 1.1 Flight Crew Training (standard transition course or cross crew qualification (CCQ) as applicable)
View SourceView Similar (10)
Flight Operations Training. The Seller will provide training for the Buyer’s flight operations personnel as further detailed in Appendix A to this Clause 16, including the courses described in this Clause 16.6.
View SourceView Similar (30)
Flight Operations Training i) In accordance with Paragraph 2. of this Letter Agreement, MDC will provide preliminary aircraft data as follows in advance of the scheduled document submittal to Federal Express in accordance with Article 14. of the Agreement which data shall constitute Technical Data. Such preliminary Technical Data shall be made available to Federal Express for the purpose of developing its MD-10 differences training programs. Additionally, updated Technical Data related to the documents below shall continuously be made available to Federal Express as it becomes available or as changes occur. This same Technical Data may be used by Federal Express in the development of its recurrent training program. a) Flight Crew Operating Manual b) Minimum Equipment List c) Weight and Balance Manual d) Documentation which is to be produced to define the Crew Performance Objectives (CPO) differences between the MD-11 and the MD-10 ii) MDC will create and provide the following Technical Data to Federal Express in support of the development of its flight training program. Federal Express may participate in the initial Crew Performance Objective (CPO) development. a) Component, Controls and Indicator (CCI) Development CCI worksheets to describe each switch, knob, lever, dial, gauge, display and any other controls the flight crew may utilize during flight. The worksheets will describe the following information on the component, control or indicator: - name - location - mode of operation - automatic or manual - purpose - function of each position - indications associated with each position (i.e. master warning/caution, aural or visual warnings b) Crew Performance Objectives (CPO) A CPO will be written for each task or procedure the crew is required to perform from arrival at the aircraft until the "Before Leaving Aircraft" checklist has been completed. The CPO will provide a step-by-step listing of each task that is required to complete a procedure, the standard to which it must be performed and the media where the task is trained. The CPOs will reflect the differences between the MD-11 and the MD-10. iii) Computer Based Training (CBT) MDC and Federal Express will work together in the development of the flight operations courseware and the flight training device (FTD) syllabus which will be jointly developed to a standard acceptable to both parties. a) The story boards will be produced by MDC to address the differences for each major system and will comply with mutually agreeable instruc...
View SourceView Similar (2)
Flight Operations Training. 1.1 Flight Crew Training (standard transition course or cross crew qualification (CCQ) as applicable) With respect to each Aircraft, the Seller shall provide flight crew training including LVO (standard transition course or CCQ as applicable) free of charge for [***] of the relevant Operator’s flight crews, which shall consist of [***] per firmly ordered Aircraft. 1.2 Flight Crew Line Initial Operating Experience The Seller shall provide to the relevant Operator pilot instructor(s) free of charge for a period of [***] pilot instructor [***] per Aircraft. 1.2.1 The maximum number of pilot instructors present at any one time shall be limited to three (3) pilot instructors, unless otherwise mutually agreed. 1.2.2 The Seller shall provide to the Buyer 3 instructor cabin attendants’ familiarization courses per firmly ordered Aircraft. 1.3 Performance / Operations Course(s) 1.3.1 The Seller shall provide to the Buyer [***] trainee days of performance / operations training free of charge for each Initial Operator personnel per Initial Operator. 1.3.2 The above trainee days shall be used solely for the performance/operations training courses as defined in the Seller’s applicable Training Course Catalog.
View Source
Flight Operations Training. 1.1 Flight Crew Training (standard transition course or cross crew qualification (CCQ) as applicable) With respect to each Aircraft, the Seller will provide flight crew training (standard transition course or CCQ as applicable) free of charge for ***** of the relevant Operator’s flight crews, which will consist of one (1) captain and one (1) first officer per firmly ordered Aircraft.
View Source
Flight Operations Training 
View SourceView Similar (5)

Related to Flight Operations Training

  • Job Training ‌ The Employer and the Union shall establish a Joint Committee on Training and Skill Upgrading for the following purposes: (1) for planning training programs for those employees affected by technological change; (2) for planning training programs to enable employees to qualify for new positions being planned through future expansion or renovation; (3) for planning training programs for those employees affected by new methods of operation; (4) for planning training programs in the area of general skill upgrading. Whenever necessary, this Committee shall seek the assistance of external training resources such as the Federal Human Resources Development Canada and Provincial Ministry of Labour, or other recognized training institutions.

  • Staff Training VENDOR shall ensure that all staff providing direct Services receive continuing education and training as needed or required and that such education and training is documented.

  • Training Services All training services, including any Deliverables, are provided for Customer’s internal training purposes only. Customer may not replicate the Deliverables or use the Deliverables to develop any of the products described in such training Deliverables. Training Deliverables are not subject to any maintenance, support, or updates.

  • Technical Training The CAISO and the Participating TOs shall respond to reasonable requests for support and provide relevant technical training to each other’s employees to support the safe, reliable, and efficient operation of the CAISO Controlled Grid and to comply with any NERC or WECC operator certification or training requirements. Examples of such technical training include, but are not limited to: (1) the theory or operation of new or modified equipment (e.g., control systems, Remedial Action Schemes, protective relays); (2) computer and applicator programs; and (3) CAISO (or Participating TO) requirements. The Parties shall enter into agreements regarding the timing, term, locations, and cost allocation for the training.

  • First Aid Training In the interests of the occupational safety and health of employees, the Employer will undertake an in-service program of first aid training aimed at providing a first aid officer for each department.