Common use of Front Clause in Contracts

Front. The left front shall have a top center placket 1-1/2" wide with two rows of stitching 7/8” apart. The shirt will have 7 buttons and buttonholes on the front; spacing between each will be 3-¾" except the spacing between the neck button and the first button on the front, which will be approximately 3-1/4". Top center placket to have woven interlining of #250 Dacron. Non-woven interlining unacceptable and shall be cause for rejection. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 1/16" raised stitch. Safety stitch joining unacceptable. Forest Green shoulder straps with set in gold cordedge. Shoulder straps to be two- piece pointed, topstitched along the edge to secure the cordedge and to be set on yoke with leading topstitch conforming with front joining seam. Shoulder straps to be interlined with #250 Dacron. To measure 2" at sleeve tapering to 1-3/8" and set not more than 1/2" from collar set seam. Cross-stitched approximately 2" from sleeve seam. Shoulder strap to have functional buttonhole to align with the sewn eyelet on the shoulder for metal button. Two-ply sling 1” wide centered over left pocket and stitched to shoulder seam and flap setting stitch. It shall have 2 (two) buttonhole eyelets 1 1/8” from top of pocket flap, spaced 1” apart and centered on sling.

Front. The left To be made with a Sport shirt front shall have a top center placket 1-1/2with each front having turn back facings approximately 3" wide with two rows of stitching 7/8” apartin width. The shirt will have 7 6 buttons and buttonholes on the front; spacing between each will be 3-¾" except the spacing between the neck button and the first button on the front, which will be approximately 3-1/4". Top center placket to have woven interlining of #250 Dacron. Non-woven interlining unacceptable and shall be cause for rejectionThere is no button or buttonhole at the neck. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 1/16" raised stitch. Safety stitch joining unacceptable. Forest Green shoulder straps with set in gold cordedge. Shoulder straps to be two- two-piece pointed, topstitched along the edge to secure the cordedge and to be set on yoke with leading topstitch conforming with front joining seam. Shoulder straps to be interlined with #250 Dacron. To measure 2" at sleeve tapering to 1-3/8" and set not more than 1/2" from collar set seam. Cross-stitched approximately 2" from sleeve seam. Shoulder strap to have functional buttonhole to align with the sewn eyelet on the shoulder for metal button. Two-ply sling 1” wide centered over left pocket and stitched to shoulder seam and flap setting stitch. It shall have 2 (two) buttonhole eyelets 1 1/8” from top of pocket flap, spaced 1” apart and centered on sling.

Front. Each front shall have a facing approximately 3" in width. The left right front shall have a top center placket 1-1/21/ 2" wide with two rows of stitching 7/8” stitches 7/ 8" apart. Stitching on the top center is not to be visible on Woven the turn back facing. The shirt will have 7 6 buttons and buttonholes on interlining the front; spacing between bet/ ween each will be 3-¾3 1 2" except the spacing between the neck button and the first button on the front, which will be approximately 3-1/41 / 4". Top center placket to have woven interlining of #250 Dacron. Non-woven interlining unacceptable and shall be cause for rejection. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched betweenbetween , and then all three are stitched down with a 1/161/ 16" raised stitch. Safety stitch joining unacceptable. Forest Green shoulder straps with An 11 ½" nylon zipper, to be set in gold cordedgebelow the second button and buttonhole, shall accomplish front closure. The top, second and bottom buttons to be attached to the left front, the balance to be sewn over the buttonholes on the right front. Shoulder straps to be two- two-piece pointed, 1/4" topstitched along the edge to secure the cordedge and to be set on yoke with leading topstitch conforming with front joining seam. Shoulder straps to be interlined with #250 Dacron. To measure 2" at sleeve tapering to 1-3/8" and set not more than 1/2" from collar set seam. Cross-stitched approximately 2" from sleeve seam. Shoulder strap to have non-functional buttonhole with a well sewn button centered on buttonhole. Points of shoulder straps to align with be tacked to the sewn eyelet on the shoulder. Edge stitched shoulder for metal buttonstrap constructionunacceptable. Two-ply sling 1” wide centered over left pocket and stitched to shoulder seam and flap setting stitch. It shall have 2 (two) buttonhole eyelets 1 1/81-1/4” from top of pocket flap, flap spaced 1-1/4” apart and centered on sling.

Front. Each front shall have a facing approximately 3” in width. The left front shall have a top center placket 1-1- 1/2" wide with two rows of stitching stitches 7/8” " apart. Stitching on the top center is not to be visible on the turn back facing. The shirt will have 7 buttons and buttonholes on the front; spacing between each will be 3-¾3- ¾" except the spacing between the neck button and the first button on the front, which will be approximately 3-1/4". Top center placket to have woven interlining of #250 Dacron. Non-woven interlining unacceptable and shall be cause for rejection. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 1/16" raised stitch. Safety stitch joining unacceptable. Forest Green shoulder straps with A 15” nylon zipper, to be set in gold cordedgebelow the second button and buttonhole, shall accomplish front closure. The top, second and bottom buttons to be attached to the right front, the balance to be sewn over the buttonholes on the left front. Shoulder straps to be two- two-piece pointed, 1/4" topstitched along the edge to secure the cordedge and to be set on yoke with leading topstitch conforming with front joining seam. Shoulder straps to be interlined with #250 Dacron. To measure 2" at sleeve tapering to 1-3/8" and set not more than 1/2" from collar set seam. Cross-stitched approximately 2" from sleeve seam. Shoulder strap to have non-functional buttonhole to align with the a well sewn eyelet on the shoulder for metal button. Two-ply sling 1” wide centered over left pocket and stitched to shoulder seam and flap setting stitch. It shall have 2 (two) buttonhole eyelets 1 1/8” from top of pocket flap, spaced 1” apart and button centered on slingbuttonhole. Points of shoulder straps to be tacked to the shoulder. Edge stitched shoulder strap construction unacceptable.

Front. Each front shall have a facing approximately 3" in width. The left right front shall have a top center placket ▇▇▇▇▇▇/ t 1-1/21/ 2" wide with two rows of stitching 7/8” stitches 7/ 8" apart. Stitching on the top center is not to be visible on the turn back facing. The shirt will have 7 6 buttons and buttonholes on interlining the front; spacing between each will be 3-¾3 1 2" except the spacing between the neck button and the first button on the front, which will be approximately 3-1/41 / 4". Top center placket to have woven interlining of #250 Dacron. Non-woven interlining is unacceptable and shall be cause for rejection. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched betweenbetween , and then all three are stitched down with a 1/161/ 16" raised stitch. Safety stitch joining unacceptable. Forest Green shoulder straps with An 11 ½" nylon zipper, to be set in gold cordedgebelow the second button and buttonhole, shall accomplish front closure. The top, second and bottom buttons to be attached to the left front, the balance to be sewn over the buttonholes on the right front. Shoulder straps to be two- two-piece pointed, 1/4" topstitched along the edge to secure the cordedge and to be set on yoke with leading topstitch conforming with front joining seam. Shoulder straps to be interlined with #250 Dacron. To measure 2" at sleeve tapering to 1-3/8" and set not more than 1/2" from collar set seam. Cross-stitched approximately 2" from sleeve seam. Shoulder strap to have non-functional buttonhole with a well sewn button centered on buttonhole. Points of shoulder straps to align with be tacked to the sewn eyelet on the shoulder. Edge stitched shoulder for metal buttonstrap constructionunacceptable. Two-ply sling 1” wide centered over left pocket and stitched to shoulder seam and flap setting stitch. It shall have 2 (two) buttonhole eyelets 1 1/81-1/4” from top of pocket flap, flap spaced 1-1/4” apart and centered on sling.