GATE CLOSURE Clause Samples

The Gate Closure clause establishes a specific deadline by which certain actions, such as submitting bids, nominations, or changes to schedules, must be completed in a contractual or operational process. In practice, this means that after the gate closure time, no further modifications or submissions are accepted, ensuring all parties operate with the same set of finalized information. This clause is essential for maintaining order and predictability, as it prevents last-minute changes that could disrupt planning or operations.
POPULAR SAMPLE Copied 2 times
GATE CLOSURE. Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use.
View SourceView Similar (11)
GATE CLOSURE. On the following road(s), Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use. PA-I-3000 2+50 Open except during periods of high fire danger or by Contract Administrators approval PA-I-3020 6+85 Closed except for periods of haul. DRAFT Purchaser shall conduct gate maintenance as listed. PA-J-3000 2+50 Gate shall be painted Safety Yellow color using high gloss alkyd enamel paint. Prior to painting, surfaces shall be prepared by cleaning, sanding and removing all loose rust and paint. All surfaces shall be dry at the time of painting. Two coats of paint shall be applied, using the procedures described in the product instructions, with a minimum of eight hours drying time between coats. Purchaser shall spread straw and/or hay on all exposed soils including, but not limited to, stream culverts, waste areas, sidecast pullback areas, stream crossing removals, bridge installations, and other areas as directed by the Contract Administrator. Revegetation of exposed soils shall be accomplished by manual dispersal of grass seed unless otherwise detailed in this Road Plan. Other methods of covering must be approved in writing by the Contract Administrator.
View Source
GATE CLOSURE. On the following road(s), Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul shall be locked or securely fastened in the open position. All gates shall be closed at termination of use.
View SourceView Similar (5)
GATE CLOSURE. On the following road, Purchaser shall keep gates closed and locked except during periods of haul. All gates must be closed at termination of use. K1200 3+12 Purchaser shall perform post-haul maintenance in accordance with the FOREST ACCESS ROAD MAINTENANCE SPECIFICATIONS.  Maintain slope lines to a stable gradient compatible with the cut slope/fill slope ratios. Remove slides up to 50 cubic yards in volume from ditches and the roadway. Repair fill- failures, in accordance with Clause 4-6 EMBANKMENT SLOPE RATIO, with selected material or material approved by the Contract Administrator. Remove overhanging material from the top of cut slopes.  Waste material from slides or other sources shall be placed and compacted in stable locations identified in the road plan or approved by the Contract Administrator, so that sediment will not deliver to any streams or wetlands.  Slide material and debris shall not be mixed into the road surface materials, unless approved by the Contract Administrator.
View Source
GATE CLOSURE. Access to the Facility for Event participants is strictly limited to the access hours agreed upon by the Parties.
View Source
GATE CLOSURE. On the following road(s), Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use. PA-J-1200 2+15 PA-I-2600 1+00 DRAFT Purchaser shall conduct gate maintenance as listed.
View Source
GATE CLOSURE. On the following road(s), Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use. E354420A 45+15 Close and lock gate each day when hauling activities are complete between 12/1 and 3/31 108+48 Close and lock gate each day when hauling activities are complete E354417F 3+00 Close and lock gate each day when hauling activities are complete
View Source
GATE CLOSURE. On the following road(s), Purchaser shall keep gates and or bollards closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use. Purchaser shall conduct gate maintenance as listed. PA-J-3000 0+55 Gate shall be painted Safety Yellow color using high gloss alkyd enamel paint. Prior to painting, surfaces shall be prepared by cleaning, sanding and removing all loose rust and paint. All surfaces shall be dry at the time of painting. Two coats of paint shall be applied, using the procedures described in the product instructions, with a minimum of eight hours drying time between coats. PA-J-3010 1+50 Gate shall be painted Safety Yellow color using high gloss alkyd enamel paint. Prior to painting, surfaces shall be prepared by cleaning, sanding and removing all loose rust and paint. All surfaces shall be dry at the time of painting. Two coats of paint shall be applied, using the procedures described in the product instructions, with a minimum of eight hours drying time between coats.
View Source
GATE CLOSURE. On the following road(s), Purchaser shall keep gates closed and locked except during periods of haul. All gates that remain open during haul must be locked or securely fastened in the open position. All gates must be closed at termination of use. Purchaser shall conduct gate maintenance as listed. Purchaser shall remove all old gate material from state land before the termination of the contract. PA-S-1000 2+00 Gate shall be painted Safety Yellow color using high gloss alkyd enamel paint. Prior to painting, surfaces shall be prepared by cleaning, sanding and removing all loose rust and paint. All surfaces shall be dry at the time of painting. Two coats of paint shall be applied, using the procedures described in the product instructions, with a minimum of eight hours drying time between coats.
View Source

Related to GATE CLOSURE

  • Lane closure (i) The Contractor shall not close any lane of the Project Highway for undertaking maintenance works except with the prior written approval of the Authority’s Engineer. Such approval shall be sought by the Contractor through a written request to be made at least 10 (ten) days before the proposed closure of lane and shall be accompanied by particulars thereof. Within 5 (five) business days of receiving such request, the Authority’s Engineer shall grant permission with such modifications as it may deem necessary and a copy of such permission shall be sent to the Authority. (ii) Upon receiving the permission pursuant to Clause 14.5 (i), the Contractor shall be entitled to close the designated lane for the period specified therein, and for all lane closures extending a continuous period of 48 (forty-eight) hours, the Contractor shall, in the event of any delay in re-opening such lane, for every stretch of 250 (two hundred and fifty) metres, or part thereof, pay Damages to the Authority calculated at the rate of 0.1% (zero point one per cent) of the monthly maintenance payment for each day of delay until the lane has been re-opened for traffic. In the event of any delay in re-opening such lanes or in the event of emergency decommissioning and closure to traffic of the whole or any part of the Project Highway due to failure of the Contractor, the Contractor shall pay damages to the Authority at double the above rate, without prejudice the rights of the Authority under this Agreement including Termination thereof.

  • Emergency Closure Where there is a temporary closure as a result of an immediate emergency or a planned temporary closure due to renovations, repairs, or moves, the Employer will: a) First offer to the affected employees the choice of taking either a vacation day or an unpaid leave of absence with no loss of seniority or benefits; thereafter, at the Employer's discretion, one of the following: b) Reassign staff to another location; c) Reschedule the lost hours within two (2) pay periods; or d) Decide not to do either (b) or (c), in which case employees shall still be paid for their regularly scheduled hours which they did not work as a result of the temporary layoff.

  • Release of Pre-Closing Claims (a) Except as provided in (i) Section 6.1(c), (ii) any exceptions to the indemnification provisions of Sections 6.2, 6.3 and 6.4 set forth in those Sections and (iii) any Transaction Document and this Agreement, effective as of the Closing Date, to the fullest extent permitted by law, the Company does hereby for itself and all Persons who at any time prior to the Closing Date have been directors, officers, agents or employees of the Company (in each case, in their respective capacities as such), voluntarily, knowingly unconditionally remise, release and forever discharge Genworth and the other members of the Genworth Group, their respective Affiliates, successors and assigns, and all Persons who at any time prior to the Closing Date have been stockholders, directors, officers, agents or employees of any member of the Genworth Group (in each case, in their respective capacities as such), and their respective heirs, executors, administrators, successors and assigns, from any and all Liabilities whatsoever, whether at Law or in equity (including any right of contribution), whether arising under any contract, tort or agreement, by operation of Law or otherwise, existing or arising from any acts or events occurring or failing to occur or alleged to have occurred or to have failed to occur or any conditions existing or alleged to have existed from the beginning of time up to the Closing Date, including without limitation in connection with the transactions and all other activities to implement the IPO Transactions, the Initial Public Offering and any of the other transactions contemplated hereunder and under the Transaction Documents. (b) Except as provided in (i) Section 6.1(c), (ii) any exceptions to the indemnification provisions of Sections 6.2, 6.3 and 6.4 set forth in those Sections and (iii) any Transaction Document and this Agreement, effective as of the Closing Date, Genworth does hereby for itself and all Persons who at any time prior to the Closing Date have been stockholders, directors, officers, agents or employees of Genworth (in each case, in their respective capacities as such), remise, release and forever discharge the Company, the respective members of the Company Group, their respective Affiliates, successors and assigns, and all Persons who at any time prior to the Closing Date have been stockholders, directors, officers, agents or employees of any member of the Company Group (in each case, in their respective capacities as such), and their respective heirs, executors, administrators, successors and assigns, from any and all Liabilities whatsoever, whether at Law or in equity (including any right of contribution), whether arising under any contract, tort or agreement, by operation of Law or otherwise, existing or arising from any acts or events occurring or failing to occur or alleged to have occurred or to have failed to occur or any conditions existing or alleged to have existed from the beginning of time up to the Closing Date, including without limitation in connection with the transactions and all other activities to implement the IPO Transactions, the Initial Public Offering and any of the other transactions contemplated hereunder and under the Transaction Documents. (c) Nothing contained in Section 6.1(a) or Section 6.1(b) shall impair any right of any Person to enforce this Agreement or any Transaction Document, in each case in accordance with its terms. Nothing contained in Section 6.1(a) or Section 6.1(b) shall release any Person from: (i) any Liability, contingent or otherwise, assumed, transferred, assigned or allocated to the Group of which such Person is a member in accordance with, or any other Liability of any member of any Group under, this Agreement or any Transaction Document; (ii) any Liability for the sale, lease, construction or receipt of property or services purchased, obtained or used in the ordinary course of business by a member of one Group from a member of the other Group prior to the Closing Date; (iii) any Liability for unpaid amounts for services or refunds owing on services due on a value-received basis for work done by a member of one Group at the request or on behalf of a member of the other Group; or (iv) any Liability that Genworth and the Company may have with respect to indemnification or contribution pursuant to this Agreement or otherwise, including for claims brought against Genworth and the Company by third Persons (which third person claims shall be governed by the provisions of this Article VI and, if applicable, the appropriate provisions of the Transaction Documents). (d) The Company shall not make, and shall not permit any member of the Company Group to make, any claim or demand, or commence any Action asserting any claim or demand, including any claim of contribution or any indemnification, against Genworth or any member of the Genworth Group, or any other Person released pursuant to Section 6.1(a), with respect to any Liabilities released pursuant to Section 6.1(a). Genworth shall not, and shall not permit any member of the Genworth Group, to make any claim or demand, or commence any Action asserting any claim or demand, including any claim of contribution or any indemnification against the Company or any member of the Company Group, or any other Person released pursuant to Section 6.1(b), with respect to any Liabilities released pursuant to Section 6.1(b). (e) It is the intent of each of Genworth and the Company, by virtue of the provisions of this Section 6.1, to the fullest extent permitted by law and in furtherance of and without limitation of the releases in Section 6.1(a)-(b), to provide for a full and complete release and discharge of all Liabilities existing or arising from all acts and events occurring or failing to occur or alleged to have occurred or to have failed to occur and all conditions existing or alleged to have existed on or before the Closing Date, between or among the Company or any member of the Company Group, on the one hand, and Genworth or any member of the Genworth Group, on the other hand (including any contractual agreements or arrangements existing or alleged to exist between or among any such members on or before the Closing Date), except as expressly set forth in Sections 6.1(a), (b) and (c). At any time, at the request of any other Party, each Party shall cause each member of its respective Group to execute and deliver releases reflecting the provisions hereof.

  • PLANT CLOSURE 29.01 In the event the Company closes the plant at the Cambridge location as a result of the loss of business or a discontinuation of all operations, severance pay will be calculated at one (1) week’s regular pay per year of service. The severance payment, so calculated, is inclusive of any severance payment required by the Ontario Employment Standards Act (Revised 2000). This agreement is not applicable to a sale of the business or if the closure is occasioned by a labour dispute.

  • Account Closure At any time, for any reason, we may take any of these actions subject to applicable law: