GENERAL WORKS Sample Clauses

The 'GENERAL WORKS' clause defines the scope and responsibilities for standard or routine tasks to be performed under a contract. It typically outlines the types of work included, such as site preparation, basic construction, or maintenance activities, and may specify standards or procedures to be followed. By clearly delineating what constitutes general works, this clause helps prevent misunderstandings about the contractor’s obligations and ensures that both parties have a shared understanding of the baseline services to be provided.
POPULAR SAMPLE Copied 1 times
GENERAL WORKS. No external contractors shall be allowed on site to do any work without the written consent from the developer/seller. Nor shall the purchaser be allowed to discuss or arrange any additions or changes to the property without the knowledge of the agent. Any alterations or additions to the property must be in writing and be accepted by the SELLER and PURCHASER prior to commencement of any works. Units will be locked when near to completion. No access when the developer is not on site.
View SourceView Similar (11)
GENERAL WORKS. “General Works” shall mean any Works or portion(s) thereof (including any models, formats, processes, data, databases, software (whether in source code or object code), or algorithms) that both (i) do not directly relate to any of Service Recipient or its Affiliate’s drug products’ or portfolio candidates’ intellectual property (including any formulation(s), specification(s), dosage(s), indication(s), delivery mechanism(s), manufacturing, development, or commercialization thereof), and (ii) have general applicability to the operation of the business of the Service Provider (including for the purposes of undertaking analytics or improving or enhancing any of the Services or any other services of the Service Provider).
View SourceView Similar (10)
GENERAL WORKS. To include but not limited to 2.1 replacing conduit straps, conduit and wire for PV sensor, metal vent hoods, hinges, missing jalousie glass. Install door closers.
View Source
GENERAL WORKS. 2.1 Provide all necessary external ramps and steps to meet external ground and services preparations. 2.2 Provide all necessary power, water, foul, storm, internet, heating, security alarm, phone and network connections required for the new building to be connected to external mechanical, water and electrical services provided by others. 2.3 Provide a spare 100mm dia. Duct from within the existing building to the modular portable building electrical services entry point. 2.4 Provide all necessary attendances and liaison as required by services providers. 2.5 Carry out all necessary reinstatement of surrounding surfaces as a consequence of the new building. 2.6 Agree the building layout, site layout, finishes schedule, etc. with the school's representatives.
View Source

Related to GENERAL WORKS

  • Procurement of Small Works Works estimated to cost less than $30,000 equivalent per contract, up to an aggregate amount not to exceed $500,000 equivalent, may be procured under lump-sum, fixed-price contracts awarded on the basis of quotations obtained from three (3) qualified domestic contractors in response to a written invitation. The invitation shall include a detailed description of the works, including basic specifications, the required completion date, a basic form of agreement acceptable to the Bank, and relevant drawings, where applicable. The award shall be made to the contractor who offers the lowest price quotation for the required work, and who has the experience and resources to complete the contract successfully. Part D: Review by the Bank of Procurement Decisions

  • LABOR AND MATERIALS 4.4.1 Unless otherwise provided in the Contract Documents, the Contractor shall provide and pay for all labor, materials, equipment, tools, construction equipment and machinery, water, heat, utilities, transportation, and other facilities and services necessary for the proper execution and completion of the Work, whether temporary or permanent and whether or not incorporated or to be incorporated in the Work. Contractor guarantees that materials shall be of the best quality, that work shall be completed in a neat and workmanlike manner, that equipment will be installed in a first class manner, and that all aspects of the project will be delivered in good working order complete and perfect in every respect and that all systems and materials necessary to make the project a complete operating utility as contemplated by the above description of the project is included in the Contract price. 4.4.2 The Contractor shall a t all times enforce strict discipline and good order among his employees and shall not employ on the Work any unfit person or anyone not skilled in the task assigned to him.

  • PROTECTION OF WORK AND PROPERTY Contractor shall erect and properly maintain at all times, as required by conditions and progress of the Work, all necessary safeguards, signs, barriers, lights, and security persons for protection of workers and the public, and shall post danger signs warning against hazards created by the Work. In an emergency affecting life and safety of life or of Work or of adjoining property, Contractor, without special instruction or authorization from District, is permitted to act at his discretion to prevent such threatened loss or injury.

  • General Assembly In addition to the rules described in Section 6.2, the following rules apply:

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over ▇▇▇▇▇▇▇ of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.