Common use of Geometric visibility Clause in Contracts

Geometric visibility. Horizontal angle: 45° to the front and to the rear; however, for vehicles on which the installation of the side-marker lamps is optional this value can be reduced to 30°. If the vehicle is equipped with side-marker lamps used to supplement the reduced geometric visibility of front and rear direction-indicator lamps conforming to paragraph 6.5.5.2. and/or position lamps conforming to paragraphs 6.9.5.2. and 6.10.5.2., the angles are 45° towards the front and rear ends of the vehicle and 30º towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. above). Vertical angle: 10° above and below the horizontal. The vertical angle below the horizontal may be reduced to 5° in the case of a side-marker lamp less than 750 mm above the ground.

Geometric visibility. Horizontal angle: 45° to the front and to the rear; however, for vehicles on which the installation of the side-marker lamps is optional this value can be reduced to 30°. If the vehicle is equipped with side-marker lamps used to supplement the reduced geometric visibility of front and rear direction-direction indicator lamps conforming to paragraph 6.5.5.2. and/or position lamps conforming to paragraphs 6.9.5.2. and 6.10.5.2., the angles are 45° towards the front and rear ends of the vehicle and 30º towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. above). Vertical angle: 10° above and below the horizontal. The vertical angle below the horizontal may be reduced to 5° in the case of a side-marker lamp less than 750 mm above the ground.

Geometric visibility. Horizontal angle: 45° to the front and to the rear; however, however for vehicles on which the installation of the side-marker lamps is optional this value can be reduced to 30°. If the vehicle is equipped with side-marker lamps used to supplement the reduced geometric visibility of front and rear direction-direction indicator lamps conforming to paragraph 6.5.5.2. above and/or position lamps conforming to paragraphs 6.9.5.2. and 6.10.5.2.. above, the angles are 45° towards the front and rear ends of the vehicle and 30º 30° towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. above). Vertical angle: 10° above and below the horizontal. The vertical However, where a lamp is mounted below 750 mm (measured according to the provisions of paragraph 5.8.1. above), the downward angle below the horizontal of 10° may be reduced to 5° in the case of a side-marker lamp less than 750 mm above the ground°.

Geometric visibility. Horizontal angle: 45° to the front and to the rear; however, however for vehicles on which the installation of the side-side- marker lamps is optional this value can be reduced to 30°. If the vehicle is equipped with side-side- marker lamps used to supplement the reduced geometric visibility of front and rear direction-direction indicator lamps conforming to paragraph 6.5.5.2. and/or position lamps conforming to paragraphs 6.9.5.2. and 6.10.5.2., the angles are 45° towards the front and rear ends of the vehicle and 30º 30E towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. above). Vertical angle: 10° above and below the horizontal. The vertical angle below the horizontal may be reduced to 5° in the case of a side-side- marker lamp less than 750 mm above the ground.

Geometric visibility. Horizontal angle: 45° to the front and to the rear; however, however for vehicles on which the installation of the side-marker lamps is optional this value can be reduced to 30°. If the vehicle is equipped with side-marker lamps used to supplement the reduced geometric visibility of front and rear direction-direction indicator lamps conforming to paragraph 6.5.5.2A6.5.5.2. and/or position lamps conforming to paragraphs 6.9.5.2A6.9.5.2. and 6.10.5.2A6.10.5.2., the angles are 45° towards the front and rear ends of the vehicle and 30º 30° towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. aboveA6.5.5.2.). Vertical angle: 10° above and below the horizontal. The vertical However, where a lamp is mounted below 750 mm (measured according to the provisions of paragraph A5.8.1.), the downward angle below the horizontal of 10° may be reduced to 5° in °. A6.18.6. Orientation Towards the case of a side-marker lamp less than 750 mm above the ground.

Geometric visibility. Horizontal angle: 45° ( to the front and to the rear; however, however for vehicles on which the installation of the side-marker lamps is optional this value can be reduced to 30°(. If the vehicle is equipped with side-marker lamps used to supplement the reduced geometric visibility of front and rear direction-direction indicator lamps conforming to paragraph 6.5.5.2. and/or position lamps conforming to paragraphs 6.9.5.2. and 6.10.5.2., the angles are 45° ( towards the front and rear ends of the vehicle and 30º 30( towards the centre of the vehicle (see the figure in paragraph 6.5.5.2. above). Vertical angle: 10° ( above and below the horizontal. The vertical angle below the horizontal may be reduced to 5° ( in the case of a side-marker lamp less than 750 mm above the ground.