Hardware Alarm Pins Clause Samples

Hardware Alarm Pins. The CFP2 Module supports alarm hardware pins as listed in Table 2-3. Specifications of the CFP2 hardware alarm pins are given in Reference [1]. Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 20 PRG_ALRM1 Programmable Alarm 1 MSA Default: HIPWR_ON O 3.3V LVCMOS Active High per CFP MSA MIS Ref. [7] 21 PRG_ALRM2 Programmable Alarm 2 MSA Default: MOD_READY, Ready state has been reached O 3.3V LVCMOS 22 PRG_ALRM3 Programmable Alarm 3 MSA Default: MOD_FAULT O 3.3V LVCMOS 25 RX_LOS Receiver Loss of Signal O 3.3V LVCMOS Loss of Signal OK 27 MOD_ABS Module Absent O 3.3V LVCMOS Absent Present Pull Down2
View SourceView Similar (29)
Hardware Alarm Pins. ‌ The CFP4 Module supports alarm hardware pins as listed in Table 1-2. Specifications of the CFP4 hardware alarm pins are given in Ref.[1]. Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 12 RX_LOS (PRG_ALRM) Receiver Loss of Signal (Optionally configurable as Programmable Alarm after Reset1) O 3.3V LVCMOS Loss of Signal2 OK2 1 When Programmable Alarm is configured, MSA Default is HIPWR_ON. 2 Active High per CFP MSA MIS Ref. [3] when PRG_ALRM is configured for this pin.
View SourceView Similar (4)
Hardware Alarm Pins. The CFP Module supports alarm hardware pins, listed in Table 2-3: Hardware Alarm Pins. Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 33 PRG_ALRM1 Programmable Alarm 1 MSA Default: HIPWR_ON O 3.3V LVCMOS Active High per MDIO document [5] 34 PRG_ALRM2 Programmable Alarm 2 MSA Default: MOD_READY, Ready state has been reached O 3.3V LVCMOS 35 PRG_ALRM3 Programmable Alarm 3 MSA Default: MOD_FAULT O 3.3V LVCMOS
View SourceView Similar (3)
Hardware Alarm Pins. Functional Description‌
View SourceView Similar (3)
Hardware Alarm Pins non-MDIO The CFP Module supports alarm, control and monitor functions via hardware pins and via an MDIO bus. Upon module initialization, these functions are available. The CFP uses pins in the electrical connector for alarm signals, listed in Table 2-3: Hardware Alarm Pins. Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 33 PRG_ALRM1 Programmable Alarm 1 MSA Default: RXS, RX CDR Lock Indicator O 3.3V LVCMOS Active High per MDIO document [5] 34 PRG_ALRM2 Programmable Alarm 2 MSA Default: HIPWR_ON O 3.3V LVCMOS 35 PRG_ALRM3 Programmable Alarm 3 MSA Default: MOD_READY, initialization sequence done O 3.3V LVCMOS 40 RX_LOS Receiver Loss of Signal O 3.3V LVCMOS Loss of Signal OK
View Source
Hardware Alarm Pins. Functional Description Per specifications given in CFP MSA Hardware Specification, Revision 1.4, June 7, 2010 [1].
View Source

Related to Hardware Alarm Pins

  • Hardware NCR Voyix may offer you the option to purchase or subscribe to Hardware. Hardware provided may not be new but may be like-new, except for Hardware purchased from NCR Voyix, which will be new. Delivery of the Hardware will be made to your designated Licensed Site(s). All Hardware purchased by you directly from NCR Voyix or from a Reseller for use in the United States, including Alaska and Hawaii, includes a standard 30-day non-transferable warranty against defects in manufacture, beginning on the date of purchase. Damage from wear and tear, misuse and other factors are not covered.

  • Hardware and Software In order to use the Services, you must obtain and maintain, at your expense, compatible mobile hardware and software as specified by Credit Union from time to time. Credit Union is not responsible for any third party software you may need to use the Services. Any such software is accepted by you as is and is subject to the terms and conditions of the software agreement you enter into directly with the third party software provider at time of download and installation.

  • Software The Software is licensed to you subject to any terms and conditions presented when you downloaded it from a source authorized by NCR Voyix, as well as those contained in this Agreement. If there is a conflict, this Agreement will control. You are licensed to use the Software only with the Service and with Hardware purchased or subscribed from NCR Voyix or its Resellers. Your license to any Software will end when your subscription to the Service ends. The Software is copyrighted and licensed, not sold, and is NCR Voyix’s confidential and unpublished information. You will retain any copyright notices and proprietary legends on all copies of the Software and the media on which it is delivered. Any attempt to transfer the Software is void and will automatically cause your license to end.

  • Customer Property Customer Property is and shall remain your sole and exclusive property. “Customer Property” means all graphic user interface, text, content, images, video, music, designs, products, computer programs, drawings, documentation and other materials of any kind posted, submitted, provided or otherwise made available to us by you or an Authorized User in connection with the Products and Services. Customer Property may also contain Personal Information which is defined in Section 5.

  • TOOL STORAGE 1. A company shall provide on all construction jobs in towns and cities, and elsewhere where reasonably necessary and practicable (or if requested buy the employee), a suitable and secure waterproof lock-up solely for the purpose of storing employees’ tools, and on multi-storey and major projects the company shall provide, where possible, a suitable lock-up for employees’ tools within a reasonable distance of the work area of large groups of employees. 2. Where an employee is absent from work because of illness or accident and has advised the company in accordance with Clause 33 – Personal Leave of the award, the company shall ensure that the employee’s tools are securely stored during his/her absence.