Harmonic Control Clause Samples

POPULAR SAMPLE Copied 1 times
Harmonic Control. Each Party shall design, construct, operate, maintain, and use its electric facilities in accordance with Prudent Utility Practice to reduce, to acceptable levels, the harmonic currents and voltages which pass into the other Party's facilities. To that end, the Parties shall be guided by the recommended practices and requirements for harmonic control specified in The Institute of Electrical and Electronics Engineers, Inc. (IEEE) Electrical Power System Standard 519-1992, or its successor. The Parties shall accomplish harmonic reductions using equipment which is specifically designed, and permanently operated and maintained, as an integral part of the facilities of the Party which owns the system on which the harmonics are generated. Contract No. 95MS-94862 Exhibit A, Page 8 of 8 Contract No. 95MS-94862 Northwest Aluminum Co. Effective on the Commencement Date
Harmonic Control. Each Party shall design, construct, operate, maintain and use its electric facilities in accordance with the IEEE 519 standard and Good Utility Practice to reduce to acceptable levels the harmonic currents and voltages which pass into the other Party's facilities. Harmonic reductions shall be accomplished with equipment that is specifically designed and permanently operated and maintained as an integral part of the facilities of the Party that owns the system on which harmonics are generated.
Harmonic Control. The Seller shall perform harmonic testing to confirm compliance of the requirements and recommendations contained in [IEEE Standard 519-1991].
Harmonic Control. 15 APPLICABLE ONLY IF TRANSFEREE IS NOT A PARTY TO THIS CONTRACT 36. Protection of the Transferor...................................... 15 RELATING ONLY TO RURAL ELECTRIFICATION BORROWERS 37. Approval of Contract.............................................. 15 APPLICABLE ONLY IF BONNEVILLE IS THE TRANSFEROR 38. Equitable Adjustment of Rates..................................... 15 -------------------------------------------------------------------------------- GENERAL APPLICATION -------------------
Harmonic Control. Each Party shall design, construct, operate, maintain, and use its electric facilities in accordance with Prudent Utility Practice to reduce, to acceptable levels, the harmonic currents and voltages which pass into the other Party's facilities. To that end, the Parties shall be guided by the recommended practices and requirements for harmonic control specified in The Institute of Electrical and Electronics Engineers, Inc. (IEEE) Electrical Power System Standard 519-1992, or its successor. The Parties shall accomplish harmonic reductions using equipment which is specifically designed, and permanently operated and maintained, as an integral part of the facilities of the Party which owns the system on which the harmonics are generated. Contract No. 95MS-94854 Exhibit A, Page 8 of 8 Contract N▇. ▇▇▇▇-▇▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇. Effective on the Commencement Date (e) Voltage Flicker Voltage flicker is normally detectable through visible variations in light intensity. However, flicker may be present even when no light variations are detectable. Since flicker is disruptive to lighting and can damage computer equipment, it must be controlled. IEEE Recommended Practices and Requirements for Harmonic Control in Electric Power Systems, (IEEE Standard 519) provides definitions and limits on acceptable levels of voltage flicker, as set by IEEE Standard 519. Both Parties shall control voltage flicker on their respective systems as required by IEEE Standard 519.

Related to Harmonic Control

  • ELECTRONIC CONTRACTING The parties agree that if this Contract is transmitted electronically neither party shall contest the validity of this Contract, or any acknowledgement thereof, on the basis that this Contract or acknowledgement contains an electronic signature.

  • Electronic Commerce Supplier agrees to participate in ▇▇▇▇▇’s current and future electronic commerce applications and initiatives. For purposes of this Order, each electronic message sent between the parties within such applications or initiatives shall be deemed: (a) ”written” and a “writing”;

  • Electronic communication (a) Any communication to be made between the Agent and a Lender under or in connection with the Finance Documents may be made by electronic mail or other electronic means, if the Agent and the relevant Lender: (i) agree that, unless and until notified to the contrary, this is to be an accepted form of communication; (ii) notify each other in writing of their electronic mail address and/or any other information required to enable the sending and receipt of information by that means; and (iii) notify each other of any change to their address or any other such information supplied by them. (b) Any electronic communication made between the Agent and a Lender will be effective only when actually received in readable form and in the case of any electronic communication made by a Lender to the Agent only if it is addressed in such a manner as the Agent shall specify for this purpose.

  • Electronic Communications Notices and other communications to the Lenders and the L/C Issuer hereunder may be delivered or furnished by electronic communication (including e-mail and Internet or intranet websites) pursuant to procedures approved by the Administrative Agent, provided that the foregoing shall not apply to notices to any Lender or the L/C Issuer pursuant to Article II if such Lender or the L/C Issuer, as applicable, has notified the Administrative Agent that it is incapable of receiving notices under such Article by electronic communication. The Administrative Agent or the Borrower may, in its discretion, agree to accept notices and other communications to it hereunder by electronic communications pursuant to procedures approved by it, provided that approval of such procedures may be limited to particular notices or communications. Unless the Administrative Agent otherwise prescribes, (i) notices and other communications sent to an e-mail address shall be deemed received upon the sender’s receipt of an acknowledgement from the intended recipient (such as by the “return receipt requested” function, as available, return e-mail or other written acknowledgement), provided that if such notice or other communication is not sent during the normal business hours of the recipient, such notice or communication shall be deemed to have been sent at the opening of business on the next business day for the recipient, and (ii) notices or communications posted to an Internet or intranet website shall be deemed received upon the deemed receipt by the intended recipient at its e-mail address as described in the foregoing clause (i) of notification that such notice or communication is available and identifying the website address therefor.

  • Electronic Copies Each of the parties hereto shall be entitled to rely on delivery of a facsimile or PDF copy of this Agreement and acceptance by each such party of any such facsimile or PDF copy shall be legally effective to create a valid and binding agreement between the parties hereto in accordance with the terms hereof.