Main characteristics Sample Clauses

Main characteristics. 4.1. Mass

Main characteristics. 4.1. Mass 4.1.1. The masses of the main dummy components are presented in table 2 of this annex. Table 2 Dummy Component Masses Component (body part) Mass (kg) Tolerance ± (kg) Principle contents Head 4.0 0.2 Complete head assembly including tri-axial accelerometer and upper neck load cell or replacement Neck 1.0 0.05 Neck, not including neck bracket Arm (each) 1.3 0.1 Upper arm, including arm positioning plate (each) Abdomen and lumbar spine 5.0 0.25 Abdomen flesh covering and lumbar spine Pelvis 12.0 0.6 Sacrum block, lumbar spine mounting plate, hip ball joints, upper femur brackets, iliac wings, pubic force transducer, pelvis flesh covering, 1/3 of suit Leg (each) 12.7 0.6 Foot, lower and upper leg and flesh as far as junction with upper femur (each) Total dummy 72.0 1.2

Main characteristics. 4.1. Mass 4.1.1. The masses of the main dummy components are presented in table 2 of this annex. Table 2 Head 4.0 0.2 Complete head assembly including tri-axial accelerometer and upper neck load cell or replacement Neck 1.0 0.05 Neck, not including neck bracket Arm (each) 1.3 0.1 Upper arm, including arm positioning plate (each) Abdomen and lumbar spine 5.0 0.25 Abdomen flesh covering and lumbar spine Pelvis 12.0 0.6 Sacrum block, lumbar spine mounting plate, hip ball joints, upper femur brackets, iliac wings, pubic force transducer, pelvis flesh covering, 1/3 of suit Leg (each) 12.7 0.6 Foot, lower and upper leg and flesh as far as junction with upper femur (each) Total dummy 72.0 1.2

Main characteristics. 4.1. Mass Table 1 Q-dummy mass distributions Q0 Q1 Q1.5 Q3 Q6 Q10 Head + Neck (incl. acc. mount) 1.13 ± 0.06 2.41 ± 0.10 2.80 ± 0.10 3.17 ± 0.10 3.94 ± 0.10 4.21 ± 0.15 Torso (incl. acc. mount and chest deflection sensor, not including APTS) 1.40 ± 0.08 4.21 ± 0.25 4.74 ± 0.25 6.00 ± 0.30 9.07 ± 0.40 14.28 ± 0.50 (incl. suit) Legs (together) 0.58 ± 0.03 1.82 ± 0.20 2.06 ± 0.20 3.54 ± 0.10 6.90 ± 0.10 12.48 ± 0.44 Arms (together) 0.28 ± 0.02 0.89 ± 0.20 1.20 ± 0.20 1.48 ± 0.10 2.49 ± 0.10 3.98 ± 0.20 Suit 0.08 ± 0.02 0.27 ± 0.05 0.30 ± 0.05 0.40 ± 0.10 0.55 ± 0.10 0.63 ± 0.10 Total 3.47 ± 0.21 9.6 ± 0.80 11.10 ± 0.80 14.59 ± 0.70 22.95 ± 0.80 35.58 ± 1.39 The installation of Abdominal Pressure Twin Sensors (APTS) in frontal and rear impact may add up 0.2 kg to the Q1.5 and 0.5kg to the Q3, Q6 and Q10 dummies. 4.2. Principal dimensions Figure 2 Table 2 Q-dummy dimensions No. Q0 Q1 Q1.5 Q3 Q6 Q10 (design targets) Dimensions in mm 17 Seating height (head tilted forward) 355 ± 9 479 ± 9 499 ± 9 544 ± 9 601 ± 9 733.7 ± 9 18 Shoulder height (sitting) 255 ± 5 298 ± 7 309 ± 7 329 ± 7 362 ± 7 473 ± 7 Stature (head tilted forward) - 740 ± 9 800 ± 9 985 ± 9 1143 ± 9 1453.2 ± 12 5 Chest depth - 114 ± 5 113 ± 5 146 ± 5 141 ± 5 171 ± 5 15 Shoulder width 145 ± 5 227 ± 7 227 ± 7 259 ± 7 305 ± 7 334.8 ± 7 12 Hip width - 191 ± 7 194 ± 7 200 ± 7 223 ± 7 270 ± 7 1 Back of buttocks to front of knees 130 ± 5 211 ± 5 235 ± 5 305 ± 5 366 ± 5 485.4 ± 6 2 Back of buttocks to popliteus - 161 ± 5 185 ± 5 253 ± 5 299 ± 5 414,9 ± 6 21 Thigh height, sitting 69 72 79 92 114 ± 3 Height of spacer device for positioning of dummy1 229 ± 2 237 ± 2 250 ± 2 270 ± 2 359 ± 2 1 The neck diameter is taken as the diameter of the top and bottom plate of the Q dummy necks. Middle disks are 56.9 mm 2 Q6 neck disk at top 3 Q6 neck disk at bottom 4 Neck shield diameter 1. Adjustments of joints Joints should preferably be adjusted according to procedures included in the Q-dummy manuals.0

Main characteristics. 3.1. Mass Table 1:Q-dummy manikin mass distributions Q0 Q1 Q1.5 Q3 Q6 [Q10] (design targets) Head + Neck (incl. acc. mount) 1.10±0.10 2.41±0.10 2.80±0.10 3.17±0.10 3.94±0.10 [4.19] Torso (incl. acc. mount and chest deflection sensor) 1.50±0.15 4.21±0.25 4.74±0.25 6.00±0.30 9.07±0.40 [14.85] (incl. suit) Legs (together) 0.58±0.06 1.82±0.10 3.06±0.10 3.54±0.10 6.90±0.10 [12.50] Arms (together) 0.28±0.03 0.89±0.10 1.20±0.10 1.48±0.10 2.49±0.10 [4.00] Suit 0.27±0.05 0.27±0.05 0.30±0.05 0.40±0.10 0.55±0.10 (see torso) 3.2. Principal dimensions Table 2:Q-dummy manikin dimensions Q0 Q1 Q1.5 Q3 Q6 [Q10] (design targets) Seating height (head tilted forward) 355 479 499 544 601 < 748 Shoulder height (sitting) 225 298 309 329 362 473 Stature (head tilted forward) - 740 800 985 1143 < 1443 Chest depth - 114 113 146 141 171 Shoulder width 230 227 227 259 305 338 Hip width - 191 194 200 223 270 Back of buttocks to front of knees 130 211 235 305 366 488 Back of buttocks to popliteus - 161 185 253 299 418

Main characteristics. Maximal limits for loads to be transported on board (NPS units or compartments of ATO ships): Max length – 43,0 м; Max width – 19,0 м; Max height – 15,0 м; Mass – 2955 t; Max draft (for floating units) IVECO Patrol trucks Protective Buildings (201 and 202)

Main characteristics. Scope of the Financial Instrument The Financial Intermediary originates a portfolio of New Debt Finance (subject to a minimum Leverage Effect) for which it will receive an uncapped portfolio guarantee (in the form of direct, counter- or co-guarantees) from the EIF in exchange for the payment of a Guarantee Fee.

Main characteristics. 3.1. Mass Table 1 Component Mass in kg by age group Head + neck 2.20 ± 0.10 2.70 ± 0.10 3.45 ± 0.10 3.60 ± 0.10 Torso 3.40 ± 0.10 5.80 ± 0.15 8.45 ± 0.20 12.30 ± 0.30 Upper arm (2x) 0.70 ± 0.05 1.10 ± 0.05 1.85 ± 0.10 2.00 ± 0.10 Lower arm (2x) 0.45 ± 0.05 0.70 ± 0.05 1.15 ± 0.05 1.60 ± 0.10 Upper leg (2x) 1.40 ± 0.05 3.00 ± 0.10 4.10 ± 0.15 7.50 ± 0.15 Lower leg (2x) 0.85 ± 0.05 1.70 ± 0.10 3.00 ± 0.10 5.00 ± 0.15 Total 9.00 ± 0.20 15.00 ± 0.30 22.00 ± 0.50 32.00 ± 0.70 3.2. Principal dimensions 3.2.1. The principal dimensions, based on Figure 1 of this annex, are given in Table 2. Figure 1 11 2 1 15 7 13 12 6 4 14 16 17 21 3 18 19 8 Table 2 No. Dimensions Dimensions in mm by age group 1 Back of buttocks to front knee 195 334 378 456 2 Back of buttocks to popliteus, sitting 145 262 312 376 3 Centre of gravity to seat 180 190 190 200 4 Chest circumference 440 510 580 660 5 Chest depth 102 125 135 142 6 Distance between shoulder blades 170 215 250 295 7 Head width ▇▇▇ ▇▇▇ ▇▇▇ 141 8 Head length 166 174 175 181 9 Hip circumference, sitting 510 590 668 780 10 Hip circumference, standing (not shown) 470 550 628 740 11 Hip depth, sitting 125 147 168 180 12 Hip width, sitting 166 206 229 255 13 Neck width 60 71 79 89 14 Seat to elbow 135 153 155 186 15 Shoulder width 216 249 295 345 16 Eye height sitting ▇▇▇ ▇▇▇ ▇▇▇ 625 17 Height, sitting 450 560 636 725 18 Shoulder height, sitting 280 335 403 483 19 Sole to popliteus, sitting 125 205 283 355 20 Stature (not shown) 708 980 1 166 1 376 21 Thigh height, sitting 70 85 95 106 4. Adjustment of joints

Main characteristics. 4.1. Mass 4.1.1. The masses of the main dummy components are presented in table 2 of this annex. Table 2 - Dummy Component Masses Component (body part) Mass (kg) Tolerance ±(kg) Principle contents Head 4.0 0.2 Complete head assembly including tri-axial accelerometer and upper neck load cell or replacement Neck 1.0 0.05 Neck, not including neck bracket