Measurement of Field Volumes Clause Samples

Measurement of Field Volumes. All gas delivered at a Field Delivery Point shall be measured by a suitable orifice meter or meters of standard make furnished, installed, operated, and kept in repair by the owners of the equipment at the point where delivery is made to Southern’s Lines which shall be the same meter or meters used under the provisions of each Plant Owner’s or Third Party Supplier’s individual gas purchase contract with Southern. The volumes measured by said meter or meters shall be used for purposes of settlement under this Agreement. The computation of all gas volumes measured by orifice meters shall be based on the latest orifice factors published by the American Gas Association corrected to a base pressure of 15.025 psia and at a base temperature of sixty degrees ▇▇▇▇▇▇▇▇▇▇ (▇▇° F), and the measurement procedures, technical requirements, and standards for all such meters shall be as set out in each Owner’s or Plant Supplier’s gas transportation contract. Plant Supplier agrees that the Plant Operator shall have the right to witness all tests of the meters and other equipment employed to measure volumes of gas delivered to Southern, and upon request, Plant Supplier shall give Plant Operator reasonable advance notice of all such tests.
View SourceView Similar (6)
Measurement of Field Volumes. All gas delivered at a Field Delivery Point shall be measured by a suitable orifice meter or meters of standard make furnished, installed, operated and kept in repair by the owners of the equipment at the point where delivery is made to Southern’s Lines which shall be the same meter or meters used under the provisions of each Plant Owner’s or Third Party Supplier’s individual gas purchase contract with Gas Transporter. The volumes measured by said meter or meters shall be used for purposes of settlement under this agreement. The computation of all gas volumes measured by orifice meters shall be based on the latest orifice factors published by the American Gas Association corrected to a base pressure of 15.025 pounds per square inch absolute and at a base temperature of sixty degrees Fahrenheit (60°F), and the measurement procedures, technical requirements and standards for all such meters shall be as set out in each Owner’s or Plant Supplier’s gas transportation contract. Plant Supplier agrees that the Plant Operator shall have the right to witness all tests of the meters and other equipment employed to measure volumes of gas delivered to Gas Transporter, and upon request, Plant Supplier shall give Plant Operator reasonable advance notice of all such tests. American Midstream, LLC Execution Copy L1214
View Source

Related to Measurement of Field Volumes

  • Usage Measurement Usage measurement for calls shall begin when answer supervision or equivalent Signaling System 7 (SS7) message is received from the terminating office and shall end at the time of call disconnect by the calling or called subscriber, whichever occurs first.

  • Venue Limitation for TIPS Sales Vendor agrees that if any "Venue" provision is included in any TIPS Sale Agreement/contract between Vendor and a TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution shall be in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a “Venue” clause that conflicts with these terms is rendered void and unenforceable.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.

  • Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.