Participating State/Entity Modifications or Additions to Master Agreement Clause Samples

This clause allows individual participating states or entities to make modifications or additions to the terms of a master agreement to address their specific legal, regulatory, or operational requirements. In practice, this means that while the core terms of the master agreement remain consistent across all parties, each state or entity can append or adjust provisions to suit their unique circumstances, such as compliance with local laws or internal policies. The core function of this clause is to provide flexibility within a standardized contract framework, ensuring that all parties can participate while still meeting their distinct needs and obligations.
Participating State/Entity Modifications or Additions to Master Agreement. (These modifications or additions apply only to actions and relationships within the Participating Entity.) The following changes are modifying or supplementing the Master Agreement terms and conditions. (These modifications or additions apply only to actions and relationships within the Participating State of Florida.) A. Upon execution of this Addendum, eligible users, in accordance with Section 2, may purchase products and services under contract using the State of Florida alternate contract source number 46151504-NASPO-17-ACS. Eligible users acknowledge and agree to be bound by the terms and conditions of the Master Agreement except as otherwise specified in this Addendum. a. Contractor acknowledges that Participating State is an agency of the State of Florida and mandated by the State of Florida that every contract must include the list of terms and conditions stated in State of Florida Form PUR 1000, General Contract Conditions, which is incorporated by reference. b. Discriminatory Vendors. A vendor placed on the discriminatory vendor list pursuant to section 287.134 of the Florida Statutes may not be awarded or perform work as a contractor, supplier, sub-contractor, or consultant under a contract with any public entity; or transact business with any public entity.
Participating State/Entity Modifications or Additions to Master Agreement. These modifications or additions apply only to actions and relationships within the Participating Entity. Participating State/Entity must check one box: [__] No changes to the terms and conditions of the Master Agreement are required [__] The following changes are modifying or supplementing the Master Agreement terms and conditions.
Participating State/Entity Modifications or Additions to Master Agreement. (These modifications or additions apply only to actions and relationships within the Participating
Participating State/Entity Modifications or Additions to Master Agreement. The following provisions of the Master Agreement do not form a part of the contract with the State of South Carolina or any of its public procurement units: Payment Governing Law and Venue
Participating State/Entity Modifications or Additions to Master Agreement. The following changes are modifying or supplementing the Master Agreement terms and conditions. (These modifications or additions apply only to actions and relationships within the Participating State of Florida.) A. Upon execution of this Addendum, eligible users, in accordance with Section 2, may purchase products and services under this PA using the State of Florida alternate contract source number 46151504‐ NASPO‐17‐ACS.
Participating State/Entity Modifications or Additions to Master Agreement. (These modifications or additions apply only to actions and relationships within the Participating State.) [X] The following changes are modifying or supplementing the Master Agreement terms and conditions. A. Freight Policy Except as further clarified below, all shipments are F.O.B. Destination, freight prepaid and allowed for all purchasing entities. Master Agreement pricing, includes all shipping and delivery costs for deliveries within the Anchorage, Fairbanks, and Juneau areas. The Anchorage, Fairbanks, and Juneau areas are defined as follows: Anchorage Area: all areas within Anchorage and all surrounding communities, in their entirety, accessible by roadway and within a 50 mile radius of Anchorage city limits. Fairbanks Area: all areas within Fairbanks and all surrounding communities, in their entirety, accessible by roadway and within a 50 mile radius of Fairbanks city limits. Shipping and delivery costs for deliveries outside of the Anchorage, Fairbanks and Juneau areas must be a pass-through charge. The Contractor must pre-pay all shipping and delivery costs and charge back those actual costs to the State ordering agency. The Contractor cannot charge the State ordering agency any additional cost such as a package or handling fee. All emergency or rush deliveries that require special shipping and handling will also be at the State ordering agency’s expense as a pass-through charge, with prior approval from the State ordering agency. All shipping and delivery costs billed to a State ordering agency shall be added to an invoice as a separate line item.
Participating State/Entity Modifications or Additions to Master Agreement. CONSTRUCTION OF AGREEMENT AND TERMS -This agreement shall be construed in accordance with the laws of the State of Maine, and is binding upon and inures to the benefit of the parties and their respective successors and assigns.
Participating State/Entity Modifications or Additions to Master Agreement. State Reporting and Credits A. HP agrees to provide quarterly utilization reports, developed by the lead State, reflecting net sales for the period by the last day of the month following quarter end. The State may request additional reports as mutually agreed by both parties. B. HP also agrees to provide an additional quarterly report of State Department usage of HP Branded products for Band 1 (Desktops), Band 2 (Notebooks) and Band 3 (Tablets), including Monitors (Peripherals), but excluding services. This report will be submitted electronically to the State contact listed in this Addendum and used to determine credit fees. a. Credit Fee HP agrees to provide a 0.5% credit toward the purchase of HP branded products on the NASPO ValuePoint PC Master Agreement. The credit will be calculated based on net sales of State agency direct purchase orders to HP and excludes orders received from Political Subdivisions (Local, Higher Education and K-12). The credit will be issued quarterly and will allow BIT to purchase products noted above through a Zero Purchase Order submitted to the point of contact listing in the PA.
Participating State/Entity Modifications or Additions to Master Agreement. (These modifications or additions apply only to actions and relationships within the Participating Entity.) Participating State/Entity to check one box. [ ] No changes to the terms and conditions of the Master Agreement are required [_X_] The following changes are modifying or supplementing the Master Agreement terms and conditions. 1. The laws of the State of Texas shall govern this Participating Addendum. 2. The State of Texas Cooperative Contract Participating Agreement No. 680C7-2016-185 shall take precedence over this Participating Addendum. 3. This agreement may last up to five years as described in Section 22 of Texas Cooperative Contract Participation Agreement No. 680C7-2016-185. If the Master Agreement is extended beyond five years, CPA will have discretion whether to extend this participating addendum. CPA must give advance written notice to the Contractor of any extension. Administered by the State of Colorado (hereinafter “Lead State”)

Related to Participating State/Entity Modifications or Additions to Master Agreement

  • Unforeseen and Emergency Scheduled RDO work where Notice not Provided (a) If notice is not provided by the Employer in accordance with clause 38.8(c) and 38.8(d) then the affected Employees, in addition to accrued entitlements, will be paid as if they were undertaking Public Holiday Work in accordance with clause 39.9 of this Agreement.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • CFR PART 200 Contract Provisions Explanation Required Federal contract provisions of Federal Regulations for Contracts for contracts with ESC Region 8 and TIPS Members: The following provisions are required to be in place and agreed if the procurement is funded in any part with federal funds. The ESC Region 8 and TIPS Members are the subgrantee or Subrecipient by definition. Most of the provisions are located in 2 CFR PART 200 - Appendix II to Part 200—Contract Provisions for Non-Federal Entity Contracts Under Federal Awards at 2 CFR PART 200. Others are included within 2 CFR part 200 et al. In addition to other provisions required by the Federal agency or non-Federal entity, all contracts made by the non- Federal entity under the Federal award must contain provisions covering the following, as applicable. Contracts for more than the simplified acquisition threshold currently set at $250,000, which is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must address administrative, contractual, or legal remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and penalties as appropriate. Notice: Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members reserves all rights and privileges under the applicable laws and regulations with respect to this procurement in the event of breach of contract by either party. Does vendor agree? Yes

  • Terms and Conditions Pertaining to Individual Account Service Title Title to Firm Full-Requirements Power Supply will transfer from Competitive Supplier to Participating Customers at the Point of Sale. In accordance with the Distribution Utility's Terms and Conditions for Competitive Suppliers, the Competitive Supplier will be responsible for any and all losses incurred on the local network transmission systems and distribution systems, as determined by the Distribution Utility. Billing and Payment Unless otherwise specified in an Exhibit to this ESA, all billing under this ESA shall be based on the meter readings of each Participating Customer's meter(s) performed by the Distribution Utility. Competitive Supplier shall cause the Distribution Utility to prepare and mail bills to Participating Customers monthly. The Competitive Supplier shall adopt the billing and payment terms offered by the Distribution Utility to its Eligible Customers on Default Service. If actual meter date is unavailable, the Competitive Supplier may cause the Distribution Utility to ▇▇▇▇ based on its good faith estimates of usage. Any overcharge or under-charge will be accounted for in the next billing period for which actual meter data is available. Regional and Local Transmission The prices quoted in Exhibit A do not include current and future charges for distribution service costs collected by the Distribution Utility under its distribution service tariff or local transmission costs as may be imposed by NYISO or individual electric utilities that have FERC transmission tariffs. The Competitive Supplier understands that these costs will be collected by the Distribution Utility. If, in the future, Competitive Supplier becomes responsible for such distribution or transmission costs, Competitive Supplier shall be entitled to collect such costs from Participating Customers to the extent permitted by any Governmental Rules. These costs are "pass through" costs as determined by the appropriate regulatory agencies.