Plan and Profile Sheets. The plan and profile sheets shall be developed for (street names) , , , and , and conform to the following requirements: 1. Plan and profile sheets shall be prepared at a scale of 1”=40’ horizontal and 1”=4’ vertical, and oriented such that north is shown to the top or right side of each sheet. 2. All stationing shall be positive and shall proceed from south to north or from west to east. 3. Existing features including existing utilities shall be shown with dashed lines and proposed or design features shall be shown with solid lines. Vertical utility locations verified in the field shall be shown on the profile. 4. Locations, dimensions and types of existing and proposed driveways shall be shown. 5. The plans shall show the names of all intersecting streets and shall identify the station and angle of the intersection of the centerlines. 6. Each plan and profile sheet shall show two readily accessible benchmarks to establish vertical control. 7. Horizontal control points shall be shown at all Points of Curvature, Points of Tangency, and Points of Intersection. Horizontal control points shall also be shown for Points on Curve or Points on Line such that the maximum spacing between control points is 600 feet or less.
Appears in 3 contracts
Sources: Consulting Agreement, Consulting Agreement, Consulting Agreement