Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters 3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters. 3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except: (i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company; (ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit); (iii) where it is not lawful for the Service Provider to operate the Providing Unit; (iv) to the extent that the Service Provider is affected by Force Majeure; or (v) in the event of a test of the Providing Unit under OC11 of the Grid Code or a System Test under OC10 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9. 3.2 Compliance with the Grid Code, Distribution Code, Network Codes and Protocol 3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, Distribution Code, the Network Codes and the Protocol as appropriate as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 2 contracts
Sources: Ds3 System Services Framework Agreement, Ds3 System Services Agreement
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 OC10 of the Grid Code or a System an Operational Test under OC10 OC8 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Distribution Code, Network Codes Code and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, ,Distribution Code, the Network Codes Code and the Protocol as appropriate as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 2 contracts
Sources: Ds3 System Services Framework Agreement, Ds3 System Services Framework Agreement
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 of the Grid Code or a System Test under OC10 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Distribution Code, Network Codes Code and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, ,Distribution Code, the Network Codes Code and the Protocol as appropriate as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 2 contracts
Sources: Ds3 System Services Framework Agreement, Ds3 System Services Framework Agreement
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 OC10 of the Grid Code or a System an Operational Test under OC10 OC8 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Code or Distribution Code, Network Codes and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, Code or Distribution Code, the Network Codes and the Protocol Code as appropriate as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 1 contract
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 OC10 of the Grid Code or a System an Operational Test under OC10 OC8 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Distribution Code, Network Codes and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, Distribution Code, the Network Codes and the Protocol as appropriate applicable as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 1 contract
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 of the Grid Code or a System Test under OC10 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Code or Distribution Code, Network Codes and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, Code or Distribution Code, the Network Codes and the Protocol Code as appropriate as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 1 contract
Provision and Purchase of DS3 System Services. 3.1 Duty to provide DS3 System Services in accordance with the applicable Operating Parameters
3.1.1 In consideration of the Company’s agreement to pay the DS3 System Services Payments to the Service Provider on the terms and subject to the conditions of this Agreement, the Service Provider shall at all times during the term of, and subject to, this Agreement maintain, repair, fuel and operate the Providing Unit as required by Good Industry Practice and any legal requirements in order to provide the Relevant DS3 System Services in accordance with the applicable Operating Parameters.
3.1.2 The Service Provider shall reasonably endeavour not to issue or allow to remain outstanding an Availability Notice, a Technical Parameters Notice or an Additional Grid Code Characteristics Notice which declares the Availability, applicable Technical Parameters or additional technical data (respectively) of a Providing Unit at levels or values inferior to those that the Providing Unit could achieve at that time except:
(i) during periods of Scheduled Outage or forced outage or otherwise with the consent of the Company;
(ii) where necessary to avoid an imminent risk of injury to persons or material damage to property (including the Providing Unit);
(iii) where it is not lawful for the Service Provider to operate the Providing Unit;
(iv) to the extent that the Service Provider is affected by Force Majeure; or
(v) in the event of a test of the Providing Unit under OC11 OC10 of the Grid Code or a System an Operational Test under OC10 OC8 of the Grid Code, provided that this Clause 3.1.2 shall not require the Service Provider to declare levels or values better than those specified in Schedule 9.
3.2 Compliance with the Grid Code, Distribution Code, Network Codes and Protocol
3.2.1 The Service Provider shall, during the term of this Agreement, comply with the Grid Code, Distribution Code, the Network Codes and the Protocol as appropriate applicable as it relates to the provision of the DS3 System Services, (including declaring to the Company any inability to comply with the applicable Operating Parameters), subject to any derogations granted to the Service Provider by the Regulatory Authority.
Appears in 1 contract
Sources: Ds3 System Services Agreement