Common use of Reflectors Clause in Contracts

Reflectors. Two red and two amber at rear of bus. Directional Signals: Shall be in compliance with FMVSS and state statutes. Signals, turn and four-way emergency flashers, shall be wired as an independent circuit at to that of the rear brake light system as to allow for emergency flash circuit to be operable and uninterrupted by a brake application. Control switch shall be self-concealing type mounted on the steering column. Shall include a hazard-warning feature as required by FMVSS 108. A third or center OEM brake light, LED, shall be mounted above the center of the rear window. Rear Brake lights, Tail Lights, Turn Signals and Reverse Lights: All LED. Interior Dome Lights: All LED. Should be ceiling or side ceiling transition panel mounted. There should be a minimum of eight interior dome lights to provide sufficient interior lighting. The opening of the door shall activate all bus body dome lights when the ignition is on or by a separate switch in the driver’s compartment. There shall be two shielded entryway lights, wired to light when the door opens. A dome light shall also be provided over the driver's seat area. The driver's seat area dome light shall be a separate circuit from the passenger area dome lights, however switches conveniently placed near the driver’s seat shall activate both sets of dome lights.

Reflectors. Two red and two amber at rear of bus. Directional Signals: Shall be in compliance with FMVSS and state statutes. Signals, turn and four-way emergency flashers, shall be wired as an independent circuit at to that of the rear brake light system as to allow for emergency flash circuit to be operable and uninterrupted by a brake application. Control switch shall be self-concealing type mounted on the steering column. Shall include a hazard-warning feature as required by FMVSS 108. A third or center OEM brake light, LED, shall be mounted above the center of the rear window. Rear Brake lights, Tail Lights, Turn Signals Signals, and Reverse Lights: All LED. Interior Dome Lights: All LED. Should be ceiling or side ceiling transition panel mounted. There should be a minimum of eight six interior dome lights to provide sufficient interior lighting. The opening of the door shall activate all bus body dome lights when the ignition is on or by a separate switch in the driver’s compartment. There shall be two shielded entryway lights, wired to light when the door opens. A dome light shall also be provided over the driver's seat area. The driver's seat area dome light shall be a separate circuit from the passenger area dome lights, however switches conveniently placed near the driver’s seat shall activate both sets of dome lights.