RESS retention Sample Clauses

RESS retention. RESS located inside the passenger compartment shall remain in the location in which they are installed and RESS components shall remain inside RESS boundaries. No part of any RESS that is located outside the passenger compartment for electric safety assessment shall enter the passenger compartment during or after the impact test. The manufacturer shall demonstrate compliance in accordance with paragraph 7. of Annex 9.
RESS retention. Compliance shall be determined by visual inspection Figure 1 Material: metal, except where otherwise specified Linear dimensions in millimetres Tolerances on dimensions without specific tolerance: (a) on angles: 0/-10° (b) on linear dimensions: up to 25 mm: 0/-0.05 mm over 25 mm:
RESS retention. Compliance shall be determined by visual inspection. 1. Access probes Access probes to verify the protection of persons against access to live parts are given in figure 1.
RESS retention. RESS located inside the passenger compartment shall remain in the location in which they are installed and RESS components shall remain inside RESS boundaries. No part of any RESS that is located outside the passenger compartment for electrical safety assessment shall enter the passenger compartment during or after the impact test. The manufacture shall demonstrate compliance in accordance with paragraph 7. of Annex 7. 5.6. Specifications of paragraphs 5.5. to 5.5.3. above are deemed to be met if the vehicle equipped with an electrical power train operating on high voltage complies with the specifications of paragraphs 5.2.8. to 5.2.8.3. of Regulation No. 94, 02 series of amendments.
RESS retention. Compliance shall be determined by visual inspection Jointed test finger (IPXXB) Material: metal, except where otherwise specified Linear dimensions in millimetres Tolerances on dimensions without specific tolerance: (a) On angles: 0/-10° (b) On linear dimensions: up to 25 mm: 0/-0.05 mm over 25 mm: ±0.2 mm
RESS retention. RESS located inside the passenger compartment shall remain in the location in which they are installed and RESS components shall remain inside RESS boundaries. No part of any RESS that is located outside the passenger compartment for electric safety assessment shall enter the passenger compartment during or after the impact test. The manufacturer shall demonstrate compliance in accordance with paragraph 7. of Annex 11." Insert new paragraphs 11.4. to 11.8., to read: "11.4. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 02 series of amendments.

Related to RESS retention

  • Risk Retention The Equityholder hereby covenants, for the benefit of the Administrative Agent, the Lenders, the Collateral Agent and, in respect of paragraphs (d) and (e) below only, the Servicer that, for so long as any Advance remains outstanding: (a) it will retain, as originator, on an ongoing basis, a material net economic interest in the form specified in paragraph (d) of Article 6(3) of the Securitisation Regulation, being retention of the first loss tranche and, if necessary, other tranches having the same or a more severe risk profile than those transferred or sold to investors and not maturing any earlier than those transferred or sold to investors, through maintaining funding to the Borrower under the LLC Agreement, in an amount equal to not less than 5% of the Retention Basis Amount (such net economic interest being the “Retention”); (b) neither it nor any of its Affiliates will sell, hedge or otherwise mitigate its credit risk under or associated with the Retention where to do so would cause the transaction contemplated by the Facility Documents to cease to be compliant with the EU Retention Requirements; (c) it will take such further action, provide such information as is in its possession (provided that the provision of such information would not contravene any applicable contract, law or regulation or duties of confidentiality binding on the Equityholder) and enter into such other agreements, in each case, as may reasonably be required by the Borrower, a Lender or the Administrative Agent to satisfy the EU Retention Requirements; (d) it will confirm to each of the Borrower, the Administrative Agent, the Servicer, each Lender and the Collateral Agent, its continued compliance with the covenants set out at paragraphs (a) and (b) above in each Monthly Report; (e) it will promptly notify the Borrower, the Administrative Agent, the Servicer, each Lender and the Collateral Agent in writing if for any reason it fails to comply with either of the covenants set out in paragraphs (a) or (b) above in any way; and (f) it will notify each of its Affiliates of the contents of paragraph (b) above and shall use reasonable endeavours to procure that each of its Affiliates complies with the terms of paragraph (b) as if it were a party thereto. Notwithstanding anything to the contrary contained herein, neither the Equityholder nor the Borrower makes any representation as to compliance of the transaction or any of the parties hereto with respect to Securitisation Regulation. Any Person accepting the benefits of this Section 13.22 and/or Section 13.23 below (including any related definitions or provisions), shall be deemed to have agreed to the terms set forth in this paragraph and each Lender hereby represents that is not relying on any of the Borrower, the Servicer or the Equityholder or any of their respective Affiliates, for any financial, tax, legal, accounting, or regulatory advise in connection with the matters set forth in this Section 13.22 and/or Section 13.23 below.

  • Final Retention Subject to the terms hereof, Landlord shall deliver to Tenant a check for the Final Retention, together with any other undisbursed portion of the Allowance required to pay for the Allowance Items, within 30 days after the latest of (a) the completion of the Tenant Improvement Work in accordance with the approved plans and specifications; (b) Landlord’s receipt of (i) copies of all Tenant Improvement Contracts; (ii) copies of invoices for all labor and materials provided to the Premises; (iii) executed unconditional mechanic’s lien releases satisfying California Civil Code §8134 for all prior payments made pursuant to Section 1.2.2.1 above (to the extent not previously provided to Landlord), together with executed unconditional final mechanic’s lien releases satisfying California Civil Code § 8138 for all labor and materials provided to the Premises subject to the Final Retention; (iv) a certificate from Tenant’s architect, in a form reasonably acceptable to Landlord, certifying that the Tenant Improvement Work has been substantially completed; (v) evidence that all governmental approvals required for Tenant to legally occupy the Premises have been obtained; and (vi) any other information reasonably requested by Landlord; (c) Tenant’s delivery to Landlord of “as built” drawings (in CAD format, if requested by Landlord); or (d) Tenant’s compliance with Landlord’s standard “close-out” requirements regarding city approvals, closeout tasks. Tenant’s contractor, financial close-out matters, and Tenant’s vendors. Landlord’s payment of the Final Retention shall not be deemed Landlord’s approval or acceptance of the Tenant Improvement Work.

  • Document Retention The Firm shall maintain for review by Citizens any documentation, receipts, files, invoices and time-keeping records in support of all disbursements for at least three (3) years after the file is closed by the Firm. Additional document retention requirements may be specified in the Firm’s Contract for Legal Services with Citizens. Citizens will not honor fees or expenses associated with audit preparation, proceedings or resolution, unless the expenses are requested and pre-approved by Citizens (i.e. copying services, delivery services, etc.).

  • Record Retention The Company will, pursuant to reasonable procedures developed in good faith, retain copies of each Issuer Free Writing Prospectus that is not filed with the Commission in accordance with Rule 433 under the Securities Act.

  • Regulation RR Risk Retention Ford Credit, as Sponsor, and the Depositor agree that (i) Ford Credit will cause the Depositor to, and the Depositor will, retain the Residual Interest on the Closing Date and (ii) Ford Credit will not permit the Depositor to, and the Depositor will not, sell, transfer, finance or hedge the Residual Interest except as permitted by Regulation RR.