Robustness Checklist Sample Clauses

Robustness Checklist. Before releasing any Licensed Product, Adopter must perform tests and analyses to assure compliance with these Robustness Rules. A Robustness Checklist is attached as Exhibit C-1 for the purpose of assisting Adopter in performing tests covering certain important aspects of these Robustness Rules. Inasmuch as the Robustness Checklist does not address all elements required for the manufacture of a Compliant product, Adopter is strongly advised to review carefully the Specification, Compliance Rules (including, for avoidance of doubt, these Robustness Rules) so as to evaluate thoroughly both its testing procedures and the compliance of its Licensed Products. Adopter shall provide copies of the Specification, the Compliance Rules (including, for avoidance of doubt, these Robustness Rules) and the Robustness Checklist to its supervisors responsible for design and manufacture of Licensed Products.
View SourceView Similar (12)
Robustness Checklist. Notice: This Checklist is intended as an aid to the correct implementation of the Robustness Rules for hardware and software implementations of the DTCP Specification in a Licensed Product. DTLA strongly recommends that you complete this Checklist for each hardware model or software version of a Licensed Product before releasing any product and at a sufficiently early date in design, as well as during production, to avoid product compliance redesign delays. This Checklist does not address all aspects of the Specification and Compliance Rules necessary to create a product that is fully compliant. Failure to perform necessary tests and analysis could result in a failure to comply fully with the Specification, Compliance Rules or Robustness Rules in breach of the DTLA Adopter Agreement and, as a consequence, in appropriate legal action of DTLA and Eligible Content Participants. DATE: MANUFACTURER: PRODUCT NAME: HARDWARE MODEL OR SOFTWARE VERSION: NAME OF TEST ENGINEER COMPLETING CHECKLIST: TEST ENGINEER: COMPANY NAME: COMPANY ADDRESS: PHONE NUMBER: FAX NUMBER: GENERAL IMPLEMENTATION QUESTIONS
View SourceView Similar (6)
Robustness Checklist. The following subsections of the Agreement shall be amended as follows: 1.9.1 Exhibit G of the Agreement shall be renamed to “Robustness Checklist for Standard Devices”. 1.9.2 Exhibit G “Robustness Checklist for Standard Devices” shall be amended by replacing all occurrences of “Robustness Rules checklist” with “Robustness Checklist for Standard Devices”.
View SourceView Similar (3)
Robustness Checklist. Notice: This Checklist is intended as an aid to the correct implementation of the Robustness Rules for hardware and software implementations of the HDCP Specification in a Licensed Product. Licensor strongly recommends that you complete this Checklist for each hardware model or software version of a Licensed Product before releasing any product and at a sufficiently early date in design, as well as during production, to avoid product compliance redesign delays. This Checklist does not address all requirements necessary to create a product that is Compliant. Failure to perform the tests and analysis necessary to comply fully with the HDCP Specification, Compliance Rules or Robustness Rules could result in a breach of the HDCP License Agreement and appropriate legal action of Licensor and Eligible Content Participants. If any particular design or production work is being outsourced or handled by contractors to the company, compliance with the Robustness Rules remains the responsibility of this company. For review only - Not valid for execution DATE: MANUFACTURER: PRODUCT NAME: HARDWARE MODEL OR SOFTWARE VERSION: NAME OF TEST ENGINEER COMPLETING CHECKLIST: TEST ENGINEER: COMPANY NAME:
View SourceView Similar (2)
Robustness Checklist. Notice: This Checklist is intended as an aid to the correct implementation of the Robustness Rules for hardware and software implementations of the Specifications in a Host Device. This Checklist does not address all aspects of the Specifications and Compliance Rules necessary to create a product that is fully compliant. Failure to perform the tests and analysis necessary to comply fully with the Specifications, Compliance Rules or Robustness Rules could result in a breach of the CableCARD Interface License Agreement and appropriate legal action taken by CableLabs or other parties under the License Agreement.
View Source
Robustness Checklist. Notice: This checklist is intended as an aid to the implementation of the Robustness Rules for the Hardware and the Software implementations of the SVR CP Specifications in a Licensed Product. Sony strongly recommends that Licensee complete this Checklist for each Licensed Product before releasing any License Product and at a sufficiently early date in design, as well as during production, to avoid product compliance redesign delays. This Checklist does not address all aspects of the SVR CP Specifications and the Compliance Rules necessary to create a Licensed Product that is fully compliant. Failure to perform necessary tests and analysis could result in a failure to comply fully with the SVR CP Specifications, the Compliance Rules or the Robustness Rules in breach of the Agreement and, as a consequence, in appropriate legal action of Sony and Eligible Content Participants. Notwithstanding whether any particular design or production work is being outsourced or handled by Subcontractors to Licensee, compliance with the above Robustness Rules remains the responsibility of the Licensee. Date: Manufacturer: Product Name: Hardware Model or Software Version: Name of Test Engineer Completing Checklist: Test Engineer: Company Name: Company Address: Phone Name: Fax Number:
View Source
Robustness Checklist. Notice: This Checklist is intended as an aid to the correct implementation of the Robustness Rules for hardware and software implementations of the Referenced Technology in a Licensed Product. This Checklist does not address all aspects of the Referenced Technology and Compliance Rules necessary to create a product that is fully compliant. Failure to perform the tests and analysis necessary to comply fully with the Referenced Technology, Compliance Rules or Robustness Rules could result in a breach of this Agreement and appropriate legal action taken by CableLabs or other parties under the License Agreement. COMPANY ADDRESS: FAX NUMBER: 1 Has the Licensed Product been designed and manufactured so there are no switches, buttons, jumpers, or software equivalents of the foregoing, or specific traces that can be cut, by which the content protection technologies, analog protection systems, output restrictions, recording limitations, or other mandatory provisions of the Referenced Technology or Compliance Rules can be defeated or by which Controlled Content can be exposed to unauthorized copying? 2 Has the Licensed Product been designed and manufactured so there are no service menus and no functions (such as remote-control functions, switches, check boxes, or other means) that can intercept the flow of Controlled Content or expose it to unauthorized copying? 3 Has the Licensed Product been designed and manufactured so there are no service menus and no functions (such as remote-control functions, switches, check boxes, or other means) that can turn off any analog protection systems, output restrictions, recording limitations, or other mandatory provisions of the Referenced Technology or Compliance Rules?
View Source
Robustness Checklist. Notice: This Checklist is intended as an aid to the correct implementation of the Robustness Rules for hardware and software implementations of the HDCP Specification in a Licensed Product. Licensor strongly recommends that you complete this Checklist for each hardware model or software version of a Licensed Product before releasing any product and at a sufficiently early date in design, as well as during production, to avoid product compliance redesign delays. This Checklist does not address all requirements necessary to create a product that is Compliant. Failure to perform the tests and analysis necessary to comply fully with the HDCP Specification, Compliance Rules or Robustness Rules could result in a breach of the HDCP License Agreement and appropriate legal action of Licensor and Eligible Content Participants. If any particular design or production work is being outsourced or handled by contractors to the company, compliance with the Robustness Rules remains the responsibility of this company.
View Source

Related to Robustness Checklist

  • Project Monitoring Reporting and Evaluation The Recipient shall furnish to the Association each Project Report not later than forty-five (45) days after the end of each calendar semester, covering the calendar semester.

  • Quality Assurance Requirements There are no special Quality Assurance requirements under this Agreement.

  • Money Market Fund Compliance Testing and Reporting Services Subject to the authorization and direction of the Trust and, in each case where appropriate, the review and comment by the Trust’s independent accountants and legal counsel, and in accordance with procedures that may be established from time to time between the Trust and the Administrator, the Administrator will:

  • PERFORMANCE MANAGEMENT SYSTEM 5.1 The Employee agrees to participate in the performance management system that the Employer adopted for the employees of the Employer; 5.2 The Employee accepts that the purpose of the performance management system will be to provide a comprehensive system with specific performance standards to assist the employees and service providers to perform to the standards required; 5.3 The Employer must consult the Employee about the specific performance standards and targets that will be included in the performance management system applicable to the Employee; 5.4 The Employee undertakes to actively focus on the promotion and implementation of the key performance indicators (including special projects relevant to the employee’s responsibilities) within the local government framework; 5.5 The criteria upon which the performance of the Employee shall be assessed shall consist of two components, Operational Performance and Competencies both of which shall be contained in the Performance Agreement; 5.6 The Employee’s assessment will be based on his performance in terms of the outputs/outcomes (performance indicators) identified as per attached Performance Plan, which are linked to the KPAs, and will constitute 80% of the overall assessment result as per the weightings agreed to between the Employer and Employee; 5.7 The Competencies will make up the other 20% of the Employee’s assessment score. The Competencies are spilt into two groups, leading competencies (indicated in blue on the graph below) that drive strategic intent and direction and core competencies (indicated in green on the graph below), which drive the execution of the leading competencies. Strategic direc on and leadership People management Program and project management Financial management Change leadership Governance leadersip Moral competence Planning and organising Analysis and innova on Knowledge and informa on management Communica on Results and quality focus

  • Quality Management System Supplier hereby undertakes, warrants and confirms, and will ensue same for its subcontractors, to remain certified in accordance with ISO 9001 standard or equivalent. At any time during the term of this Agreement, the Supplier shall, if so instructed by ISR, provide evidence of such certifications. In any event, Supplier must notify ISR, in writing, in the event said certification is suspended and/or canceled and/or not continued.