SAFETY LIFECYCLE Clause Samples
SAFETY LIFECYCLE. (IEC 61508) The following definition of a Safety Lifecycle is based on the IEC 61508 standard (see Figure 6).
Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.
Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87. 1. All employees who are required to wear safety glasses shall also be required to wear side ▇▇▇▇▇▇▇, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City. Section 2. The City agrees to pay the full cost of required prescription safety glasses, with frames not to exceed $75.00. This excludes the cost of the eye examination which will be the responsibility of the employee. The effected employees will be allowed one (1) replacement of safety glasses every two (2) years. In the event the safety glasses become lost, unserviceable, or broken on the job, the employee must present a written request for replacement to the Department Head and Human Resources Director. If the employee breaks his safety glasses while on the job, the Department shall replace the glasses at no cost to the employee. The replacement of lost glasses or glasses that are broken off the job will be at the discretion of the Department Head and Human Resources Director. If an employee has been provided safety glasses by the City, the employee shall be permitted to retain possession of the glasses after separation from the City without reimbursing the City for any costs associated with the glasses. Section 3. An employee who is required to wear prescription safety glasses must present a written request to his department head or designated representative. Section 4. The employee must obtain a current prescription and the employee is authorized the use of sick leave not to exceed two (2) hours to accomplish this examination. The employee will obtain a purchase order from the Department Head prior to ordering the safety glasses. The employee will present the purchase order to the appropriate vendor when ordering. The vendor will contact the appropriate Department Head when the glasses are ready for delivery. The Department Head will then notify the employee who will present himself at the vendor for fitting and pickup. Section 5. In the event a probationary employee has been issued safety glasses and terminates his employment with the City for any reason during the probationary period, he shall be required to reimburse the City for any expenses incurred in the purchase of safety glasses.
Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding ▇▇▇▇▇▇▇, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.
Safety Footwear The Employer will determine the employees that are required to wear safety footwear as essential Personal Protective Equipment (PPE). Those Employer- designated employees within the following classifications will receive a biennial allowance up to $200 per designated employee. The process for purchasing safety footwear will follow the Employer’s policy or practice. • Buildings and Grounds Supervisors • Control Tech • Cooks • Custodians • Electricians and Electrician Leads • Facility Operations Maintenance Specialist • Food Service Workers, Worker Leads, Supervisors and Managers • Grounds & Nursery Services Specialists • HVAC Techs • Maintenance Custodians, Specialists and Mechanics • Painters and Painter Leads • Security Guards; Campus Security Officers, Sergeants and Safety Supervisors • Warehouse Workers and Equipment Operators • Utility Workers ARTICLE 22
SAFETY PRACTICES (a) i Employees requiring glasses must wear glasses, preferably with safety lenses instead of contact lenses while on the job site. ii W.C.B. approved safety footwear must be worn at all times while on the job site. iii Employee attire will be in conformance with W.C.B. Regulation and the Employer’s policy.