- Structures Type Selection & Meeting Clause Samples

- Structures Type Selection & Meeting. Following is the list of structures identified within the project limits. A Type Selection Report will be prepared for bridges and non-standard walls as listed in the table below: Twin Vehicular Bridges over SR 60 Yes Cable Stayed Pedestrian Bridge over SR 60 Yes Non-Standard Retaining Walls at north & south bridge approaches Yes Non-Standard Retaining Wall at SR 60 EB Off-Ramp Yes Pedestrian RCB Underpasses (2 Locations) Yes CONSULTANT will prepare a Structure Type Selection Report for the replacement of the existing WLC Parkway Overcrossing (Br. No. 56-488) and will request a type selection meeting from Caltrans to obtain approval of the selected structure types. Based on the PR and initial discussions, it is anticipated that the replacement for the existing WLC Pkwy overcrossing will consist of three parallel bridge structures as described in the previous section. CONSULTANT will prepare two (2) Type Selection Reports for submittal to Caltrans considering the different design characteristics and construction requirements between the cable stayed bridge and the twin concrete bridges. This action will help facilitate review and approval times by Caltrans. One Type Selection Report will be prepared for the twin vehicular bridges and a separate Type Selection Report will be prepared for the cable-stayed pedestrian-bicyclist bridge. The Type Selection Reports will comply with the most current Caltrans guidelines, including, but not limited to: Bridge Design Memos, Bridge Memos to Designers, Structure Technical Policies, Seismic Design Criteria, California Amendments to AASHTO LRFD Bridge Design Specifications. The Type Selection Reports will include a discussion of structure types, foundation and falsework requirements, seismic and aesthetic considerations, traffic handling requirements and alternatives, and staging. In addition, CONSULTANT shall develop General Plan construction cost estimates. Design and construction issues will be identified in the Type Selection process and will be discussed and coordinated with CITY and Caltrans. CONSULTANT shall submit WLC Parkway OC (Replace) Type Selection documents to the Caltrans Office of Special Funded Projects (OSFP) for review and approval. CONSULTANT will prepare 3D Renderings of the final bridge concept. Renderings will include full length elevation views of concrete and cable- stayed bridges including the surrounding landscape and section (partial) views of the bridge columns and abutments. Cables will be pa...
View Source

Related to - Structures Type Selection & Meeting

  • Information about European Union Funds The procurement is related to a project and/or programme financed by European Union funds: No

  • Description of the procurement The service to include storage, collection, treatment, and return of sharps waste containers designed for the disposal of sharp medical waste, such as needles, syringes, lancets, scalpels, contaminated glass slides and cover slips, razors, and blades. The waste management process is expected to cover the collection, emptying and sanitization of the containers in a controlled environment. The return and replacement of the used containers after being treated, sanitised and reassembled to be re-used. TERMS AND CONDITIONS/ACTIVITY BASED INCOME (ABI) The terms and conditions of this framework agreement and any resulting call-off contract is appended to the ITT. These terms include provisions requiring the payment by the supplier of an ABI management charge in consideration of the award of this framework agreement, The management and administration by HTE of the overall contract structure and associated documentation,as well as the requirement to submit regular management information to HTE. SUBMISSION OF EXPRESSIONS OF INTEREST AND PROCUREMENT INFORMATION This exercise will be conducted on the HTE Bravo portal. Candidates wishing to be considered must register expressions of interest as follows: Register on the HTE portal at ▇▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇. Log into the portal with username/password. Click the SQs/ITTs Open to All Suppliers link. These are the SQs/ITTs open to any registered supplier. Click on the relevant SQ/ITT to access the content. Click the Express Interest button at the top of the page. This will move the SQ/ITT into your My SQs/My ITTs page. You can access any attachments by clicking Buyer Attachments in the SQ/ITT Details box. Follow the on screen instructions to complete the SQ/ITT. Submit your reply using the Submit Response button at the top of the page. If you require any further advice, contact the Bravo e-Tendering Help Desk at ▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇. HTE utilises the sid4gov supplier information database. Candidates should register on sid4gov at ▇▇▇▇▇://▇▇▇▇▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇.▇▇/organisation/register and submit their sid4gov company profile for publication on the database. Candidates already registered on sid4gov must ensure information is up to date. Where access to sid4gov is unavailable, please contact the sid4gov helpdesk at ▇▇▇▇▇▇▇@▇▇▇.▇▇▇.▇▇▇.▇▇. Please note that sid4gov does not prepopulate any fields on HTE's Bravo portal. Candidates must complete the Qualification & Technical Envelopes in Bravo in full.

  • Scope of Services The specific scope of work for each job shall be determined in advance and in writing between TIPS Member, Member’s design professionals and Vendor. It is permitted for the TIPS Member to provide a general scope description, but the awarded vendor should provide a written scope of work, and if applicable, according to the TIPS Member’s design Professional as part of the proposal. Once the scope of the job is agreed to, the TIPS Member will issue a PO and/or an Agreement or Contract with the Job Order Contract Proposal referenced or as an attachment along with bond and any other special provisions agreed by the TIPS Member. If special terms and conditions other than those covered within this solicitation and awarded Agreements are required, they will be attached to the PO and/or an Agreement or Contract and shall take precedence over those in this base TIPS Vendor Agreement.

  • Award criteria 40.1 The Procuring Entity shall award the Contract to the successful tenderer whose tender has been determined to be the Lowest Evaluated Tender in accordance with procedures in Section 3: Evaluation and Qualification Criteria.

  • Transparency On request, the data exporter shall make a copy of these Clauses, including the Appendix as completed by the Parties, available to the data subject free of charge. To the extent necessary to protect business secrets or other confidential information, including the measures described in Annex II and personal data, the data exporter may redact part of the text of the Appendix to these Clauses prior to sharing a copy, but shall provide a meaningful summary where the data subject would otherwise not be able to understand the its content or exercise his/her rights. On request, the Parties shall provide the data subject with the reasons for the redactions, to the extent possible without revealing the redacted information. This Clause is without prejudice to the obligations of the data exporter under Articles 13 and 14 of Regulation (EU) 2016/679.