Common use of TAILGATE Clause in Contracts

TAILGATE. Ten (10) gauge 230 BHN (115,000 psi tensile/100,000 psi yield) steel with six (6) dirt shedding boxed panels. Double-acting top and bottom. Twelve (12) inch x twelve (12) inch coal door mounted in lower center of tailgate. Corner post upper hinges shall be dual five eights (5/8) inch thick hi-tensile steel plates. Tail gate hinge plates shall be one and one quarter (1 1/4) inch thick flame cut hi-tensile steel plate. Upper hinge pins shall be one and one-quarter (1 1/4) inch diameter hardened steel roll pins with grease zerks and secured with chains to corner post. Lower hooks shall be flame cut steel with one and one-quarter (1 1/4) inch diameter hardened steel roll pins. Three eights (3/8) inch grade forty-three (43) tailgate chains to secure and allow adjustment of tailgate in both hinged positions with dual heavy-duty chain adjustable three eights (3/8) inch thick steel “banjo” type eyes welded on each side of corner posts (adjustment openings in corner posts not acceptable). Provisions for hanging tail gate chains. Heavy-duty pull/push activated air controlled valve tailgate latch assembly “buyers” (bav020) type (electric actuated valve not acceptable) mounted on center console. Three and one half (3 1/2) inch air tailgate cylinder. Hinged lifting eye constructed from three-quarter (3/4) inch diameter cold roll welded to center of tailgate. .

TAILGATE. Ten (10) gauge 230 BHN (115,000 psi tensile/100,000 psi yield) steel with six (6) dirt shedding boxed panels. Double-acting top and bottom. Twelve (12) inch x by twelve (12) inch coal door mounted in lower center of tailgate. Corner post upper hinges shall be dual five eights (5/8) inch thick hi-tensile steel plates. Tail gate Tailgate hinge plates shall be one and one quarter (1 1-1/4) inch thick flame cut hi-tensile steel plate. Upper hinge pins shall be one and one-quarter (1 1/4) inch diameter hardened steel roll pins with grease zerks and secured with chains to corner post. Lower hooks shall be flame cut steel with one and one-quarter (1 1/4) inch diameter hardened steel roll pins. Three eights (3/8) inch grade forty-three (43) tailgate chains to secure and allow adjustment of tailgate in both hinged positions with dual heavy-duty chain adjustable three eights (3/8) inch thick steel “banjo” type eyes welded on each side of corner posts (adjustment openings in corner posts not acceptable). Provisions for hanging tail gate chains. Heavy-duty pull/push activated air controlled valve tailgate latch assembly “buyers” (bav020) type (electric actuated valve not acceptable) mounted on center console. Three and one half (3 1/2) inch air tailgate cylinder. Hinged lifting eye constructed from three-quarter (3/4) inch diameter cold roll welded to center of tailgate. .