Test 1 Sample Clauses

Test 1. The Book is “in-print” under the terms of the author- publisher contract. For this purpose, the Book may be “in-print” even if the contract does not use the term “in-print.” If the contract measures “in-print” by reference to revenues earned, and more than 50% of the revenues paid to a publisher from exploitation of a Book are generated by Google’s exploitation of a Book, then those revenues shall NOT be considered in determining whether this Test 1 has been met. If the contract measures “in-print” by units sold or some measure other than revenues, then an equivalent principle will be applied in determining whether this Test 1 has been met. That a Book or information about a Book is included in a database, or that information about the Book is provided in search engine results, does not, by itself, mean that the Book is “in- print.” A Book is not “in-print” if the contract provides for reversion and all of the criteria for reversion have been met (except that the author need not have sent a request for reversion to the publisher even if required by the contract); or
View Source

Related to Test 1

  • Test Results The employer, upon request from an employee or former employee, will provide the confidential written report issued pursuant to 4.9 of the Canadian Model in respect to that employee or former employee.

  • Test The outer surface of the lamp lenses shall be subjected once or more than once to the action of the sand jet produced as described above. The jet shall be sprayed almost perpendicular to the surface to be tested. The deterioration shall be checked by means of one or more samples of glass placed as a reference near the lenses to be tested. The mixture shall be sprayed until the variation in the diffusion of light on the sample or samples measured by the method described in Appendix 2, is such that: Δ d = (T5 - T4) / T2 ≤ 0.0250 ± 0.0025 Several reference samples may be used to check that the whole surface to be tested has deteriorated homogeneously.

  • Test method This test is intended to demonstrate the immunity of the vehicle electronic systems. The vehicle shall be subject to electromagnetic fields as described in this annex. The vehicle shall be monitored during the tests. If not otherwise stated in this annex the test shall be performed according to ISO 11451-2.

  • Test procedure The engine speed shall be gradually increased from idle to the target engine speed, not exceeding the tolerance band of ±3 per cent of the target engine speed, and held constant. Then the throttle control shall be rapidly released and the engine speed shall be returned to idle. The sound pressure level shall be measured during a period of operation consisting of a maintaining constant engine speed of 1 second and throughout the entire deceleration period. The maximum sound level meter reading during this period of operation, mathematically rounded to the first decimal place, is taken as the test value.

  • Test conditions 6.1.1. The test shall be performed on a flat, dry concrete or asphalt surface affording good adhesion. 6.1.2. The ambient temperature shall be between 0°C and 45°C. 6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.