Common use of Testing/Trouble Reporting Clause in Contracts

Testing/Trouble Reporting. 1.13.4.1 Ring Connection will be responsible for testing and isolating troubles on Network Elements. Ring Connection must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection will be required to provide the results of the Ring Connection test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Global Crossing will be responsible for testing and isolating troubles on Network Elements. Ring Connection Global Crossing must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Global Crossing will be required to provide the results of the Ring Connection Global Crossing test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Global Crossing has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Global Crossing reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Global Crossing a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Global Crossing (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection bill Global Crossing for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Quality Telephone will be responsible for testing and isolating troubles on Network Elements. Ring Connection Quality Telephone must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Quality Telephone will be required to provide the results of the Ring Connection Quality Telephone test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Quality Telephone has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Quality Telephone reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Quality Telephone a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Quality Telephone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Quality Telephone for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Cinergy will be responsible for testing and isolating troubles on Network Elements. Ring Connection Cinergy must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Cinergy will be required to provide the results of the Ring Connection Cinergy test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Cinergy has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Cinergy reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Cinergy a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Cinergy (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Cinergy for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Trinity Connect will be responsible for testing and isolating troubles on Network Elements. Ring Connection Trinity Connect must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Trinity Connect will be required to provide the results of the Ring Connection Trinity Connect test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Trinity Connect has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Trinity Connect reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Trinity Connect a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Trinity Connect (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Trinity Connect for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Global Crossing will be responsible for testing and isolating troubles on Network Elements. Ring Connection Global Crossing must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Global Crossing will be required to provide the results of the Ring Connection Global Crossing test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Global Crossing has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Global Crossing reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Global Crossing a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Global Crossing (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Global Crossing for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Utility USA will be responsible for testing and isolating troubles on Network Elements. Ring Connection Utility USA must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Utility USA will be required to provide the results of the Ring Connection Utility USA test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Utility USA has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Utility USA reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Utility USA a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Utility USA (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Utility USA for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Excel PCHP will be responsible for testing and isolating troubles on Network Elements. Ring Connection Excel PCHP must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Excel PCHP will be required to provide the results of the Ring Connection Excel PCHP test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Excel PCHP has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Excel PCHP reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Excel PCHP a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Excel PCHP (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Excel PCHP for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection OnFiber will be responsible for testing and isolating troubles on Network Elements. Ring Connection OnFiber must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection OnFiber will be required to provide the results of the Ring Connection OnFiber test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection OnFiber has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection OnFiber reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection OnFiber a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection OnFiber (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection OnFiber for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Network PTS will be responsible for testing and isolating troubles on Network Elements. Ring Connection Network PTS must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Network PTS will be required to provide the results of the Ring Connection Network PTS test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Network PTS has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Network PTS reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Network PTS a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Network PTS (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Network PTS for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Universal Beepers will be responsible for testing and isolating troubles on Network Elements. Ring Connection Universal Beepers must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Universal Beepers will be required to provide the results of the Ring Connection Universal Beepers test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Universal Beepers has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Universal Beepers reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Universal Beepers a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Universal Beepers (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Universal Beepers for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Kinetix will be responsible for testing and isolating troubles on Network Elements. Ring Connection Kinetix must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Kinetix will be required to provide the results of the Ring Connection Kinetix test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Kinetix has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Kinetix reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Kinetix a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Kinetix (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Kinetix for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection Conextel will be responsible for testing and isolating troubles on Network Elements. Ring Connection Conextel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection Conextel will be required to provide the results of the Ring Connection Conextel test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection Conextel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection Conextel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection Conextel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection Conextel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection Conextel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection FLATEL will be responsible for testing and isolating troubles on Network Elements. Ring Connection FLATEL must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection FLATEL will be required to provide the results of the Ring Connection FLATEL test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection FLATEL has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection FLATEL reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection FLATEL a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection FLATEL (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection FLATEL for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Ring Connection NGTelecom will be responsible for testing and isolating troubles on Network Elements. Ring Connection NGTelecom must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Ring Connection NGTelecom will be required to provide the results of the Ring Connection NGTelecom test which indicate a problem on the BellSouth network. 1.13.4.2 Once Ring Connection NGTelecom has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Ring Connection NGTelecom reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Ring Connection NGTelecom a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Ring Connection NGTelecom (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will ▇▇▇▇ ▇▇▇▇ Connection NGTelecom for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.