Common use of Testing/Trouble Reporting Clause in Contracts

Testing/Trouble Reporting. 1.13.4.1 U-Dial will be responsible for testing and isolating troubles on Network Elements. U-Dial must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial will be required to provide the results of the U-Dial test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial EZ Communications will be responsible for testing and isolating troubles on Network Elements. U-Dial EZ Communications must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth ▇▇▇▇▇▇▇▇▇ at the time of the trouble report, U-Dial EZ Communications will be required to provide the results of the U-Dial EZ Communications test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial EZ Communications has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial EZ Communications reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial EZ Communications a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial EZ Communications (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial EZ Communications for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial Global Dialtone will be responsible for testing and isolating troubles on Network Elements. U-Dial Global Dialtone must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial Global Dialtone will be required to provide the results of the U-Dial Global Dialtone test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial Global Dialtone has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Userscustomers. 1.13.4.3 If U-Dial Global Dialtone reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial Global Dialtone a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End Usercustomer’s location more than once due to incorrect or incomplete information provided by U-Dial Global Dialtone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial ▇▇▇▇ Global Dialtone for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial Speedy Reconnect will be responsible for testing and isolating troubles on Network Elements. U-Dial Speedy Reconnect must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial Speedy Reconnect will be required to provide the results of the U-Dial Speedy Reconnect test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial Speedy Reconnect has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial Speedy Reconnect reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial Speedy Reconnect a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial Speedy Reconnect (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial ▇▇▇▇ Speedy Reconnect for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial Clearwave Communications will be responsible for testing and isolating troubles on Network Elements. U-Dial Clearwave Communications must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth ▇▇▇▇▇▇▇▇▇ at the time of the trouble report, U-Dial Clearwave Communications will be required to provide the results of the U-Dial Clearwave Communications test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial Clearwave Communications has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial Clearwave Communications reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial Clearwave Communications a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial Clearwave Communications (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial Clearwave Communications for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial InterGlobe will be responsible for testing and isolating troubles on Network Elements. U-Dial InterGlobe must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial InterGlobe will be required to provide the results of the U-Dial InterGlobe test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial InterGlobe has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial InterGlobe reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial InterGlobe a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial InterGlobe (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial InterGlobe for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 UMicro-Dial Comm will be responsible for testing and isolating troubles on Network Elements. UMicro-Dial Comm must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, UMicro-Dial Comm will be required to provide the results of the UMicro-Dial Comm test which indicate a problem on the BellSouth network. 1.13.4.2 Once UMicro-Dial Comm has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If UMicro-Dial Comm reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge UMicro-Dial Comm a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by UMicro-Dial Comm (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill UMicro-Dial Comm for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial ▇▇▇▇▇▇▇ Telephone will be responsible for testing and isolating troubles on Network Elements. U-Dial ▇▇▇▇▇▇▇ Telephone must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial ▇▇▇▇▇▇▇ Telephone will be required to provide the results of the U-Dial ▇▇▇▇▇▇▇ Telephone test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial ▇▇▇▇▇▇▇ Telephone has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial ▇▇▇▇▇▇▇ Telephone reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial ▇▇▇▇▇▇▇ Telephone a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial ▇▇▇▇▇▇▇ Telephone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial ▇▇▇▇ ▇▇▇▇▇▇▇ Telephone for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial Deland Actel will be responsible for testing and isolating troubles on Network Elements. U-Dial Deland Actel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial Deland Actel will be required to provide the results of the U-Dial Deland Actel test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial Deland Actel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial Deland Actel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial Deland Actel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial Deland Actel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial ▇▇▇▇ ▇▇▇▇▇▇ Actel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 U-Dial FeroNetworks will be responsible for testing and isolating troubles on Network Elements. U-Dial FeroNetworks must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, U-Dial FeroNetworks will be required to provide the results of the U-Dial FeroNetworks test which indicate a problem on the BellSouth network. 1.13.4.2 Once U-Dial FeroNetworks has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If U-Dial FeroNetworks reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge U-Dial FeroNetworks a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by U-Dial FeroNetworks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill U-Dial ▇▇▇▇ FeroNetworks for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.