TRANSIT BUS REQUIREMENTS Clause Samples

The Transit Bus Requirements clause sets out the specific standards and criteria that transit buses must meet under a contract or regulatory framework. This typically includes specifications related to vehicle size, capacity, accessibility features, safety equipment, and environmental standards. For example, it may require that buses be equipped with wheelchair ramps, meet certain emissions thresholds, or have a minimum number of passenger seats. The core function of this clause is to ensure that all buses provided or operated meet consistent, predefined standards, thereby promoting safety, accessibility, and regulatory compliance.
TRANSIT BUS REQUIREMENTS. See Section III.
View SourceView Similar (8)
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D Spec for Equipment Provided Optional Equipment Unit Price Hydraulic Brakes Substitute a complete ABS power brake system meeting Federal Motor Vehicle Safety Standard 49CFR571.105 ilo air brakes, with no change to base suspension specified. Service Brakes [total lining or sweep area] both front &rear: 776 -$756.75 Additional Wheelchair Restraint System Delete the minimum number of seats required for proper spacing (4 maximum) and price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to includes all belts, floor/ shoulder hardware, and storage container -$766.84 Optional Wheelchair Restraint System For each wheelchair position in the base vehicle, plus additional optional restraint systems, if ordered, install complete "Omni" style floor securements and complete belts kits, equal to Q- Straint Q-10008 or ▇▇▇-▇▇▇ ▇▇▇▇▇▇-▇▇-▇▇▇. Manufacturer and Model #: Q'STRAINT QRT-360 Q-10008 $176.58 Continuous "L" track Install 5 lanes of continuous L track (4 lanes floor mounts, 1 lane shoulder harness) for a single wheelchair position (48” length each) $252.25 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Facing) When not included in the base vehicle, provide and install one forward facing fold-away flip seat at a wheelchair station area which shall be a ▇▇▇▇▇▇▇▇ model "GO ES" seat or other pre- Compatible Equivalent. Flip seat may be lowered to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats measuring (per passenger) a minimum of 17” in width x 17” in depth x 24” in height as measured from the edge of the cushion. Raising/lowering of the seat shall be accomplished manually and shall include a lock to secure the seat in the raised position. Raised seat plus wheelchair shall not block legal aisle. Integrated 3-point lap and shoulder belts shall be provided at each seating location to accommodate an adult ambulatory passenger and shall be in compliance with FMVSS 210. Seats shall have a swing-up armrest $903.06 Air Conditioning System (Roof Mounted Condenser) Provide and install same requirements as base vehicle, except air conditioning system condenser shall be a roof mounted unit. $1,059.45 Supplemental ADA...
View SourceView Similar (7)
TRANSIT BUS REQUIREMENTS. The terms and conditions in this Section (i.e., III.2 through III.2.8) shall be considered minimum Transit Bus requirements. Appendix D: Transit Bus Contract Documents, Number 2: Contract Pricelist, includes supplemental required specifications for Transit Buses in each Lot. Transit Buses delivered to an Authorized User in a condition that would be considered unacceptable to a reasonable person may be rejected (see also Appendix B §38 Rejected Product). Items which determine this acceptance level shall include, but not be limited to, the general appearance of the interior and exterior of the Transit Bus for completeness and quality of workmanship, lubrication and fluid levels, with any leaks corrected, mechanical operation of the Transit Bus and all electrical components operational. Equipment specified to be furnished and installed shall conform to the best quality standards known to that particular industry, both product and installation.
View SourceView Similar (5)
TRANSIT BUS REQUIREMENTS. The terms and conditions in this Section (i.e., Section 3.2 through Section 3.2.7) Shall be considered minimum Transit Bus requirements. Attachment 1 - Contract Pricelist, includes supplemental required specifications for Transit Buses in the awarded Lot(s). Transit Buses delivered to an Authorized User in a condition that would be considered unacceptable to a reasonable person May be rejected (see also Appendix B §36, Rejected Product). Items which May be evaluated by the Authorized User to determine this acceptance level Shall include, but not be limited to, the general appearance of the interior and exterior of the Transit Bus for completeness and quality of workmanship, lubrication and fluid levels, with any leaks corrected, mechanical operation of the Transit Bus and all electrical components operational. Equipment specified to be furnished and installed Shall conform to the best quality standards known to that particular industry, both product and installation. 3.2.1 STANDARDS, CODES, RULES, AND REGULATIONS Transit Buses Shall be designed and assembled in accordance with all applicable industry standards, including, but not limited to, those listed below. The Transit Bus Shall comply with all governmental regulations as they apply to the Transit Bus described in the Base Item Specifications and Optional Equipment Specifications including, but not limited to, those listed below. If required by law or regulation, the appropriate decals indicating compliance Shall be affixed to the Transit Bus. A. Transit Buses Shall conform to any and all applicable New York State laws, regulations and directives, including but not limited to, New York Codes, Rules and Regulations (NYCRR), New York State Vehicle and Traffic Law (NYSVTL), and New York State Dept. of Motor Vehicles (NYSDMV). B. Transit Buses Shall comply with all current applicable Federal Motor Vehicle Safety Standards (FMVSS), Federal Motor Carrier Safety Administration (FMCSA), National Highway Traffic and Safety (NHTSA), Environmental Protection Agency (EPA), and Occupational Safety & Health Administration (OSHA) requirements. C. Transit Buses Shall comply with Federal Motor Vehicle Safety Standards (FMVSS) 214 (applicable only to Lots A, B, C, and F), FMVSS 220 (applicable to ▇▇▇▇ ▇, ▇, ▇, ▇, ▇, ▇, ▇, ▇, ▇, and M), Part 38 of the American’s with Disabilities Act (ADA), and NYS DOT regulations outlined under NYCRR Chapter VI, Article 3, Part 720-721 or any amendments thereto, except as relating to sc...
View SourceView Similar (3)
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D
View Source
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column C Spec for Equipment Provided Optional Equipment Unit Price Diesel Engine and Fuel Tank(s) Minimum 6.7 liter, 8 cylinder power stroke diesel engine rated minimum 300 HP x 600 lb. ft. torque. Nominal (plus or minus 5 gallons) 40-gallon single or dual fuel tank(s) with 10 gallon (plus or minus 2 gallon) DEF tank. Minimum 200 amp OEM alternator. Number of Cylinders: 6 $6,558.50 Liters: 6.7 Horsepower and Torque: 300 HP / 660 TQ LPG Engine and Fuel Tank(s) Minimum 6.8L V10 gasoline engine rated minimum 300 HP x 425 lb. ft. torque. Add a gaseous prep package (hardened exhaust valves) and install a Propane Autogas conversion for dedicated LPG fuel. Fuel tanks shall provide a minimum 65 GGE (Gallon Gas Equivalent) useable. Compliant with SAE J2343 and NFPA 52. Number of Cylinders: 6.8 $22,172.78 Liters: 10 Horsepower and Torque: 362 HP/ 457 TQ Additional Wheelchair Restraint System Delete seats (4 maximum) and price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to includes all belts, floor/ shoulder hardware, and storage container $1,109.90 Optional Wheelchair Restraint System For each wheelchair position in the base vehicle, plus additional optional restraint systems, if ordered, install complete "Omni" style floor securements and complete belts kits, equal to Q- Straint Q-10008 or ▇▇▇-▇▇▇ ▇▇▇▇▇▇-▇▇-▇▇▇. Manufacturer and Model #: Q'STRAINT QRT-360 Q-10008 $30.27 Continuous "L" track Install 5 lanes of continuous L track (4 lanes floor mounts, 1 lane shoulder harness) for a single wheelchair position (48” length each) $252.25 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Facing) When not included in the base vehicle, provide and install one forward facing fold-away flip seat at a wheelchair station area which shall be a ▇▇▇▇▇▇▇▇ model "GO ES" seat or other pre- Compatible Equivalent. Flip seat may be lowered to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats measuring (per passenger) a minimum of 17” in width x 17” in depth x 24” in height as measured from the edge of the cushion. Raising/lowering of the seat shall be accomplished manually and shall include a lock to secure the seat in the raised pos...
View Source
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D Spec for Equipment Provided Optional Equipment Unit Price Additional Wheelchair Restraint System Price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to include all belts, floor/ shoulder hardware, and storage container. Q-1007 / QS00073 $606.23 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Provide and install one forward facing fold-away flip seat to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats. SA0001 / Go ES Flip $915.53 Camera Security System- 6 monitor Provide and install a complete camera recording system, including software kit. Components include an 8-channel DVR capable of vertical or horizontal installation, plus simultaneous video recording for all camera heads. DVR shall be "user" programmable to record a minimum of 5 vehicle functions (signals) such as brake lights, turn signal, wheelchair lift, etc. A driver trip feature shall also be included. Camera heads to include a minimum of 2 exterior heads @ 600 TV lines resolution, with infrared feature and no audio, plus 4 interior camera heads @ 600 TV lines resolution, with infrared and audio. Install kit shall be universal for 1 or more vehicles with matching camera system. Minimum components include software, mouse, 5-6" monitor, HDD USB docking station, HDD adapter, and BNC F-RCA adapter. A compatible system is acceptable provided all functionality is maintained. Manufacturer and Model # ofDVR: Mobile Video Systems SSD8-3G Live $1,804.25 Manufacturer and Model # ofinterior camera head: MVC 500 Manufacturer and Model # of exterior camera head: MVC ▇▇▇ ▇▇▇
View Source

Related to TRANSIT BUS REQUIREMENTS

  • Access Requirements You will be responsible for providing the System to enable you to use an Electronic Service.

  • Match Requirements There is no match required on the part of the Grantee under this Agreement.

  • E-Verify Requirements To the extent applicable under ARIZ. REV. STAT. § 41- 4401, the Contractor and its subcontractors warrant compliance with all federal immigration laws and regulations that relate to their employees and their compliance with the E-verify requirements under ARIZ. REV. STAT. § 23-214(A). Contractor’s or its subcontractor’s failure to comply with such warranty shall be deemed a material breach of this Agreement and may result in the termination of this Agreement by the City.

  • Personnel Requirements a. The CONTRACTOR shall secure, at the CONTRACTOR'S own expense, all personnel required to perform this Contract. b. The CONTRACTOR shall ensure that the CONTRACTOR'S employees or agents are experienced and fully qualified to engage in the activities and perform the services required under this Contract, and that all applicable licensing and operating requirements imposed or required under federal, state, or county law, and all applicable accreditation and other standards of quality generally accepted in the field of the activities of such employees and agents are complied with and satisfied.

  • Training Requirements Grantee will: A. Authorize and require staff (including volunteers) to attend training, conferences, and meetings as directed by DSHS. B. Appropriately budget funds to meet training requirements in a timely manner, and ensure staff and volunteers are trained as specified in the training requirements listed at ▇▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇▇▇.▇▇▇/hivstd/training/ and as otherwise specified by DSHS. Grantee shall document that these training requirements are met. C. Follow the appropriate DSHS POPS by funding opportunity (as per Section I: General Requirements for All Grantees) for training and observation requirements.