Common use of VERIFICATION OF THE CONFORMITY OF PRODUCTION Clause in Contracts

VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if: 3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paras. 2.2.2., 2.3.1. and 2.3.2.); 3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation. 3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random. ▇▇▇▇▇ ▇ - ▇▇▇▇▇▇▇▇ ▇ CHRONOLOGICAL ORDER OF APPROVAL TESTS A. Tests on plastic materials (lenses or samples of material supplied pursuant to paragraph 2.2.4. of this Regulation). Samples Lenses or samples of material Lenses 1.1. Limited photometry (A.6, para. 2.1.2.) X X X 1.1. Temperature change (A.6, para. 2.1.1.) X X X

VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if: 3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paras. 2.2.2., 2.3.1. and 2.3.2.); 3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation. 3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random. ▇▇▇▇▇ ▇ - ▇▇▇▇▇▇▇▇ ▇ CHRONOLOGICAL ORDER OF APPROVAL TESTS A. Tests on plastic materials (lenses or samples of material supplied pursuant to paragraph 2.2.4. of this Regulation). Samples Lenses or samples of material Lenses. 1.11. Limited photometry (A.6, para. 2.1.2.) X X X) 1.11.1.1. Temperature change (A.6, para. 2.1.12.1.) X X X