Wall Base Clause Samples

Wall Base. Existing base will be maintained in existing painted wood grain finish. .. Alternatively, existing base or new MDF base (profile to match existing) can be re-painted per Room Finish Legend, TI Space, color per line 8. .. Rubber base in utilitarian areas per Room Finish Legend, TI Space, line 4.
View Source
Wall Base. A. Foundation soils shall be excavated to the dimensions shown on the plans. Foundation soil shall be observed by the Engineer to confirm that the bearing soils are similar to the design conditions or assumptions. B. Construct the wall base to the lines and grades shown on the plans. Place and consolidate concrete, strike, and finish plane and level. Over-excavated areas shall be filled with additional concrete or granular base material. Compact granular base material to provide a hard and level surface to support the wall units. Base material shall be compacted to a minimum of 95 percent of the maximum dry density (ASTM D698, Standard ▇▇▇▇▇▇▇). Final base elevation shall be within 0.1 feet of plan elevation. C. Prepare and smooth the granular material to ensure complete contact of the first course with the base. The base may be dressed with fine aggregate to aid leveling.
View Source
Wall Base i. All floors with carpet shall receive vinyl cove base. ii. All floors with VCT shall receive vinyl cove base. iii. All floors with ceramic tile shall receive ceramic base.
View Source
Wall Base. To be 4” high, sewn edged carpet, straight or coved. vinyl base, wood or tile to be provided throughout. Color at Tenant’s option.
View Source
Wall Base. 9.22.1 Vinyl Base (VB): Johnsonite 4” cove base at resilient or VCT floor and straight base at carpet. Location: Throughout unless otherwise noted.
View Source
Wall Base. Landlord shall provide 4-inch high, straight vinyl base on all carpeted and VCT floors at Landlord provided partitions. Color at Tenant's option, selected from manufacturer's standard line.
View Source
Wall Base. A. The wall base shall consist of dense graded crushed aggregate. A minimum of 75% of coarse material shall have 2 or more fractured faces. Wall base material shall meet the following gradation: US Standard Sieve Size Percent Passing 1-1/2” 80-100 3/4" 50-90 #4 0-40 #200 0-10 B. The contractor may substitute concrete with a minimum 28-day compressive strength of 3,000 psi for the granular base material. Concrete may be placed full thickness or as a topping over a compacted granular the base. If used as a topping, the concrete shall have a minimum thickness of 3 inches.
View Source
Wall Base. The term “Wall Base” shall include vinyl and rubber as well as contoured wall base, quarter round, and shoe moulding.
View Source
Wall Base. That detail between the wall and the floor that brings the whole space together. Our portfolio of options is the strongest in the industry. Tarkett offers more profiles, colors and finishes to compliment your interior space than any other flooring manufacturer. Our wall base product lines are designed to perform, contribute to safety and reduce install schedules. If an architectural/wood detail is desired Tarkett Millwork® is a perfect solution, eliminating variable fabrication costs and assuring reduced maintenance costs. Millwork® Masquerade offers endless custom capabilities to match finishes or unique, branded design.
View Source

Related to Wall Base

  • Workplace adjustment An employer wishing to employ a person under the provisions of this clause shall take reasonable steps to make changes in the workplace to enhance the employee’s capacity to do the job. Changes may involve re-design of job duties, working time arrangements and work organisation in consultation with other employees in the area.

  • Annual Percentage Rate Each Receivable has an APR of not more than 25.00%.

  • Contract Amount Compensation amount(s), when stated in this Bid Specifications, shall not be construed as either the maximum or minimum amount which Department shall be obligated to accept as the result of this Bid Specifications or any Agreement entered into as a result of this Bid Specifications.

  • Annual Leave Loading During a period of annual leave an employee will receive a loading of 17.5 per cent calculated on the employee’s normal hourly rate of pay and the daily fares allowance if applicable. The loading will also apply to proportionate leave on lawful termination.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply: