Installation Procedures definition

Installation Procedures means the procedures for the proper (i) assembly, erection and installation of the Towers on the Turbine foundations supplied by Purchaser, (ii) grouting of the Turbines to the Tower foundations and tightening of all bolts using the appropriate torque; (iii) assembly, erection and installation of the Turbine Nacelles and Turbine Blades upon the Towers as specified in the Turbine Specifications, Prudent Wind Industry Practices and Prudent Electrical Industry Practices; (iv) installation and testing of the Turbine electrical cables, communication cables, and control panels within the Turbine, and (v) connection of the cables from each Turbine Nacelle to the main circuit breaker within the ground controllers, all in accordance with the Turbine Installation Manual.
View Source
Installation Procedures means the procedures set forth in Exhibit D-1.
View Source

Examples of Installation Procedures in a sentence

  • Any deviation from the Standard Professional Installation Procedures will result in the installation being classified as a Non-Standard Installation, in which event additional charges will apply.

  • Purchaser shall complete the Final Assembly Work with respect to all Turbines in conformance with the procedures and requirements set forth in Exhibit P, and shall complete the Installation Work with respect to all Turbines in accordance with the Installation Procedures and, subject to Section 5.3 above, within the period of time set forth on the Completion Schedule.

  • Following completion of the Installation Work with respect to any Turbine, Purchaser shall deliver a written notice of completion to Supplier (an “Installation Completion Notice”) and Supplier shall examine each Turbine in accordance with the Installation Procedures and the Turbine Installation Manual.

  • Any deviation from Our Standard Professional Installation Procedures for any Service will result in the installation being classified as a Non-Standard Installation, in which event additional charges will apply.

  • Unless otherwise prescribed in writing, Our only responsibility for installation of the Service is described in Our Standard Professional Installation Procedures Guide, which is available to You upon request.

  • The Software Installation Procedures Document describes the GBS software installation and configuration, language configuration, testing, and acceptance sign-off procedures.

  • Unless otherwise prescribed in writing, Our only responsibility for installation of the Service is described in Knology's Standard Professional Installation Procedures Guide, which is available to You upon request.

  • The Hardware Installation Procedures Document describes the GBS hardware installation and configuration, language configuration, testing, and hardware acceptance sign-off procedures.

  • MPower shall pay the Owner or the Contractor on Owner’s behalf for the Project Installation under the Construction Agreement pursuant to Section 4.2 (Construction Agreement; Payment Arrangement) and provide certain oversight and assistance to Owner related to the Project Installation in accordance with the provisions of Article 4 (Construction and Installation Procedures).

  • Development of Installation Procedures Installation Plan Schedule ...........

Related to Installation Procedures

  • Operation Procedures means the procedures contained in Annexure A hereto which the Contractor is obliged to follow when performing work on behalf of the company

  • Auction Procedures means the Auction Procedures that are set forth in Paragraph 10 of the Articles Supplementary.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the ISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, which is the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Appendix 4 to Attachment X of the ISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • AML/KYC Procedures means the customer due diligence (CDD) procedures of a Reporting Financial Institution pursuant to the anti-money laundering or similar requirements of the jurisdiction concerned to which such Reporting Financial Institution is subject.

  • Staff Vetting Procedures means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.