Maximum Density definition

Maximum Density means a unit of measurement which represents the maximum number of dwelling units permitted to be developed on a particular area of land.
View Source
Maximum Density means the maximum “gross floor area” (as defined in Section 59-A-2.l, page 59A-21, ▇▇▇▇▇▇▇▇▇▇ County Zoning Ordinance (1994), as amended. The aggregate Maximum Density for the Park has been established pursuant to the ▇▇▇▇▇▇▇▇▇▇ County Zoning Ordinance and the approved subdivision for the Park, and subsequently allocated among each Phase of the Park pursuant to a certain Declaration of Covenants Density Averaging made by Landlord (as Declarant) and recorded or to be recorded among the Land Records of ▇▇▇▇▇▇▇▇▇▇ County, Maryland.
View Source
Maximum Density is the maximum number of residential units in the Property as provided in the Approved Master Plan. The Maximum Density is the total maximum gross residential density for the Project after mitigation of slope, floodway, and habitat constraints and is 1.08 dwelling units/acre or 2,324 dwelling units. Upon approval of the Amended Master Plan, the Maximum Density is 1.45 dwelling units/acre or 3,129 dwelling units (excluding RV units).
View Source

Examples of Maximum Density in a sentence

  • Maximum Density: Maximum weight in pounds per cubic foot of a specific material.

  • The Department will test engineered soil mix as follows: Soil Gradation GDT 4 Volume Change GDT 6 Maximum Density GDT 7 or GDT 67 Liquid Limit AASHTO T 89 Plastic Limit and Plasticity Index AASHTO T 90 Permeability AASHTO T 215 General Provisions 101 through 150.

  • The addition of such Additional Property may increase the Maximum Density (including the Additional Property) and alter other development parameters in connection with the Property by the amount of dwelling units and commercial acreage allowed pursuant to the existing entitlement on the property to be annexed or in accordance with an approved rezoning of the Additional Property which may be approved by the Town.

  • Moisture — Density Test A Moisture — density test (BS 1377: Part 4) and preliminary study will be made for each type of soil to be used in the construction of the work to determine the Maximum Density, the Optimum Moisture Content and the Moisture Range required of the soil for satisfactory compaction The filled density and actual moisture content of the compacted earthworks shall be determined by field tests according to BS 1377: Part 4.

  • Where applicable, UKAS test reports for Bulk and Maximum Density.

  • Maximum Density Determination: Method: ASTM D1557 Modified ▇▇▇▇▇▇▇ Number of Tests: Two (2) per potential source.

  • The aggregate Maximum Density for the Park has been established pursuant to the ▇▇▇▇▇▇▇▇▇▇ County Zoning Ordinance and the approved subdivision for the Park, and subsequently allocated among each Phase of the Park pursuant to a certain Declaration of Covenants Density Averaging made by Landlord (as Declarant) and recorded or to be recorded among the Land Records of ▇▇▇▇▇▇▇▇▇▇ County, Maryland.

  • Permitted Uses‌‌ Maximum Density Minimum Lot Size Vacation Rental (VR-1) 4 16 lots 0.5 acres (with access from main road) 4 0.35 acres (with access off minor collector roads Resort Condominiums 30 units 2.5 acres Guest House 4 3 0.5 acres (2 guest cottages) > 0.5 acres (4 guest cottages) Accessory Parking Accessory Buildings and Structures 4 All residential properties having access onto the main road shall require shared driveways or dual access agreements.

  • Tenant shall not use any substantial portion of the Premises for a use that results in such portion of the Premises having, on a regular basis, a population density greater than the Maximum Density, such as a high-density “call center”, any other high-density telemarketing use, or any high-density credit processing use.

  • Wear (ASTM C 131/AASHTO T 96) Each $175 Sulfate Soundness (ASTM-C88) Each $450 Flat & Elongated (ASTM D-4791) Each $85 Fractured Faces (ASTM D-5821) Each $85 Asphalt ** Extraction/Gradation Test (AASHTO T-164) Test $175 Bulk Specific Gravity (AASHTO T-166) Test $30 Theoretical Maximum Density (AASHTO T-209) Test $100 Equipment Nuclear Densometer, (ASTM D 6938) Day $50 Other Direct Charges Mileage @ current GSA Rate Note: Hourly rates are billed in ¼ hour increments, portal to portal.

Related to Maximum Density

  • Maximum Demand means the greatest demand required by a customer during a specific length of time.

  • Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.

  • Maximum Daily Limit means the maximum allowable "Daily Concentration" (defined above) when expressed as a concentration (e.g. mg/l), otherwise, it means the maximum allowable "Daily Quantity" as defined above, unless it is expressed as a flow quantity. If expressed as a flow quantity it means "Maximum Daily Flow" as defined in Section 22a-430-3(a) of the RCSA.

  • Minimum Denomination has the meaning set forth in Article IV of the Debt Agreement.

  • Maximum Daily Quantity means the daily volume of Gas or Liquids, expressed in 103m3, identified in a Shipper's Interruptible Transportation Service Agreement that Transporter agrees to receive from Shipper under Toll Schedule Interruptible Full Path Service, Toll Schedule Interruptible Receipt Service or Toll Schedule Interruptible Delivery Service, as applicable.