Sanitizing Solution definition

Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine. A sanitizing solution can be made by mixing a tablespoon of liquid household chlorine bleach with one gallon of water and prepared fresh daily.
View Source
Sanitizing Solution means Aqueous solutions described by 21 CFR 178.1010, 2004, for the purpose of sanitizing food or water contact surfaces.
View Source
Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or
View Source

Examples of Sanitizing Solution in a sentence

  • Quaternary Ammonia Sanitizer – Soluble @ 75ºF – Second Rinse – Auto-Cholor Sanitizing Solution or comparable 13.


More Definitions of Sanitizing Solution

Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or a sanitizer as defined at 40 C.F.R. 158.2203 that is registered with the EPA in accordance with 40
View Source
Sanitizing Solution means a solution approved by the US Environmental Protection Agency, a chemical disinfectant, or a bleach solution made daily.
View Source
Sanitizing Solution means Aqueous solutions described prior to being vended, and the name of the manufacturer and the by 21 CFR 178.1010, [1995]1999, for the purpose of sanitizing model number of each machine.
View Source
Sanitizing Solution means a solution containing 50 to 200 parts per million (ppm) of chlorine or a sanitizer as defined at 40 C.F.R. 158.2203 that is registered with the EPA in accordance with 40 C.F.R. 152 that is approved by the EPA for use on food contact surfaces, does not require a final rinse step, and has a testing method that can be used by child care center employees to confirm that the prescribed chemical concentrations are met. When a sanitizing solution is used in a child care center, the manufacturer’s Safety Data Sheet shall be kept on file at the child care center and the instructions for use of the sanitizing solution shall be followed. When a chorine solution is used in a child care center it shall be prepared for use within 24 hours and a testing method or kit shall be used to ensure compliance with the prescribed chlorine concentration. To achieve the maximum germ reduction with a chlorine solution, the cleaned surfaces shall be left wet with the chlorine solution and allowed to air dry or be dried only after a minimum contact time of at least two minutes. chlorine. A sanitizing solution can be made by mixing a tablespoon of liquid household chlorine bleach with one gallon of water and prepared fresh daily.
View Source
Sanitizing Solution means a solution containing 50 to 200 ppm of chlorine or a sanitizer as defined at 40 CFR 158.2203 that is registered with the EPA in accordance with 40 CFR 152 that is approved by the EPA for use on food-contact surfaces, does not require a final rinse step, and has a testing method that can be used by child care center employees to confirm that the prescribed chemical concentrations are met and that is prepared and maintained in accordance with Rule .2812(j) of this Section
View Source

Related to Sanitizing Solution

  • Supplier means the successful bidder who is awarded the contract to maintain and administer the required and specified service(s) to the State.

  • Vendor or “Vendors” means any entity submitting a bid in response to the Solicitation, the entity that has been selected as the lowest responsible bidder, or the entity that has been awarded the Contract as context requires.

  • Customer means the State agency or other entity identified in a contract as the party to receive commodities or contractual services pursuant to a contract or that orders commodities or contractual services via purchase order or other contractual instrument from the Contractor under the Contract. The “Customer” may also be the “Buyer” as defined in the PUR 1001 if it meets the definition of both terms.

  • Reseller is a category of CLECs who purchase the use of Finished Services for the purpose of reselling those Telecommunications Services to their End User Customers.

  • Manufacturer means the person or body who is responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stage of the construction of the vehicle, system, component or separate technical unit which is the subject of the approval process.