Standards and Codes definition

Standards and Codes means the following, as applicable to each Product: UL 1741; UL 60950-1; EN 60950-1; CSA22.2 No. 60950-1; IEC 60950-1; IEEE1547, FCC Part 15 Class B; ANSI C12.1, C12.10, C12.20, C37.90.1; and any other similar standards and codes compliance with which is either mandatory under applicable Law or standard for such type of equipment based on industry standards as such were in place at the time the Product was delivered to Buyer at the Delivery Point in the Territory.
View Source
Standards and Codes means, collectively, ▇▇ ▇▇▇▇, ▇▇▇ 61730, IEC 61215, CEC, Class C Fire Rating and IEC labeled for application at up to 1000V maximum system voltage.
View Source
Standards and Codes means, collectively, all standards and codes applicable to the Services and the design, engineering, fabrication, installation and start-up of the PEM System.
View Source

Examples of Standards and Codes in a sentence

  • In case Indian Standards for any particular equipment/ system/ process is not available, IEC/ IEEE or equivalent International Standards and Codes shall be followed.

  • Except as otherwise specified in this technical specification, the Indian Standards and Codes of Practice in their latest version, National Building code, PWD specification of the state of Assam and Manual on water supply and Treatment of GOI shall be adhered to for the supply, handling, laying, installation, and site testing of all material and works.

  • The TSP shall ensure that design, construction and testing of all equipment, facilities, components and systems of the Project shall be in accordance with Indian Standards and Codes issued by Bureau of Indian Standards and only in case they are not applicable under certain conditions, the other equivalent internationally recognised Standards and Codes shall be followed.

  • The Machinery and Services supplied under this Contract shall conform to the standards mentioned in the Technical Specifications and, when no applicable standard is mentioned, the latest current edition or revision of the relevant Indian Standards and Codes shall be considered.

  • The Brief shall give details of the facilities’ appearance The Brief shall give details of the materials to be used in the construction of the facility (including all fixtures, fittings and equipment) - performance and durability, and to be to all current British/European Standards and Codes of Practice.

  • All equipment used to configure the Switch Board shall comply to the relevant Standards and Codes of the Bureau of Indian Standards and to the detailed technical Specifications as included in this tender document.

  • Where appropriate Indian Standards and Codes are not available, other suitable standards and codes as approved by the MNRE shall be used.

  • Where appropriate Indian Standards and Codes are not available, other suitable standards and codes as approved by the MNRE/ CEA/ electricity regulators/ Nodal Agency shall be used.

  • All materials used must conform with the requirement of Sub- section 2 (Standards and Codes of Practice) and details of the materials proposed for all important plant items shall be submitted to the Engineer at the design stage and prior to manufacture.

  • Unless otherwise specified, such reference is solely for implementation of the technical portions of such Standards and Codes.

Related to Standards and Codes

  • Codes and Standards means all the applicable codes and standards as indicated in the Specification.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.