Static load definition

Static load means the live load that the orchestra pit lift is designed and installed to support while the lift platform is not in motion as provided by the manufacturer upon installation or as approved by the department.
View Source
Static load. 400 Te equally spread between nodes 1 to 4. VCG 55' ABL ------------------------------------------------------------------------------- Revision March 30, 2000 Page 84 of 87 110 Midnight Warrior Technical Specifications -------------------------------------------------------------------------------- Dynamic loads (worst case of survival): per mode 135 Te or 150 ST to ster▇ ▇▇ bow 145 Te or 161 ST to port or starboard 790 Te or 877 ST vertical down or 170 Te or 189 ST vertical up MOON POOL LOAD HANDLING FOUNDATION [DIAGRAM] Maximum load: 135 Te or 150 ST at each mode 1 to 4 (moon pool corners).
View Source

Examples of Static load in a sentence

  • Static load tests may be used for the determination of pile capacity.

  • Static load acceptance tests on composite and low ductility structures shall be *.

  • Static load: about 1,000 Te of 1,100 ST supported on a ring of diameter 10 m or 32' on top of ballast tank.

  • Binghamton Water St Project - ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇ February 11, 2022 McLaren File No. 210779.02 Rev.01 Page | 7 Static load testing will be required for new deep foundations to confirm that the load carrying capacity of new piles is in conformance with the design recommendations.

  • Static load testing shall be performed in accordance with the 2020 New York State Building Code and recommendations provided in the Final Geotechnical Report; piles shall be tested to 200% of the recommended allowable design loads.

  • Static load- doesn’t move, easy to design Dynamic loads- moves, harder to design Shear-splits at 90 degrees Torsion- twisting Bending- compression and tension Tension-pulling Compression- squeezing Types of finishes- varnish-paint-wax-stain-oil It enhances the look-brings out the wood grain- shiny finish- durable- protect- water resistant- smoother finish.

  • Static load tests should be conducted to clearly define the failure load.

  • Drill line diameter – 25mm Number of sheaves - 4 8 Swivel 1 CN-125, Romania-made Load capacity – 125t 9 Rotary table 1 «Р-560», Static load capacity – 320t Rotary table opening – 560mm Maximum RPM – 250rpm 10 Drilling hose 1 Diameter - 4 1/16" or more, standpipe, WP – 350 kg/сm2 11 Auxiliary brake 1 TEP 45-VI, electromagnetic, powder type 12 Air Unit 1 1 Air compressor with mechanical drive, КТ-7.

Related to Static load

  • Low-level radioactive waste or “waste” means radioactive waste that is not classified as high-level radioactive waste and that is Class A, B, or C low-level radioactive waste as defined in 10 C.F.R. §61.55, as that section existed on January 26, 1983. “Low-level radioactive waste” or “waste” does not include any such radioactive waste that is owned or generated by the United States department of energy; by the United States navy as a result of the decommissioning of its vessels; or as a result of research, development, testing, or production of an atomic weapon.

  • credit meter means a meter where an account is issued subsequent to the consumption of electricity;