Acceptance of the Features Sample Clauses

Acceptance of the Features. (1) The parties shall agree on Acceptance Test procedures. The period for conducting Acceptance Tests for the Features begins when SAP informs Customer that the Features are available for testing. Customer shall commence the Acceptance Test procedure without delay. (2) If the Acceptance Tests prove to be successful, Customer will declare acceptance of the Features (or subsets of the Features) without undue delay by signing and submitting to SAP the completed acceptance statement. (3) The Acceptance Tests shall be deemed successful if the Features are materially consistent with the Vision & Scope Document and the final version of the Product Backlog or the Specification, and if they are free of any defect causing serious interruptions in normal operations (important tasks cannot be performed due to a malfunction or an unavailable function in the respective Features that is urgently required to deal with the current situation (“Material Defects”)). (4) In case it is revealed in the course of the Acceptance Tests that the Features are not materially consistent with the Vision & Scope Document and the final version of the Product Backlog or the Specification, and/or are not free of Material Defects, Customer may refuse to declare acceptance and shall grant SAP an additional period of time to eliminate deviations from the Vision & Scope Document and the final version of the Product Backlog or the Specification, and/or Material Defects. The identification of any failure to meet these criteria must include a precise description of the problem and all relevant information that is reasonably required by SAP in order to rework the Features. After expiry of this additional period of time, the Acceptance Test procedure shall be repeated. If the repeated test still reveals deviations from the Vision & Scope Document and the final version of the Product Backlog or the Specification, and/or Material Defects which legitimate the refusal of the acceptance, then second and third repeat tests shall be carried out on the same basis as the first repeat test. (5) Customer shall not refuse acceptance of the Features if the applicable Acceptance Test only reveals immaterial defects. (6) The Features are deemed to be accepted if Customer does not report in writing or use SAP’s support infrastructure to report any Material Defects and/or deviations from the Vision & Scope Document and the final version of the Product Backlog or the Specification within 15 working days after Custome...
View SourceView Similar (58)
Acceptance of the Features. 特性之驗收 (1) The parties shall agree on Acceptance Test procedures. The period for conducting Acceptance Tests for the Features begins when SAP informs Customer that the Features are available for testing. Customer shall commence the Acceptance Test procedure without delay. 各方應同意驗收測試程序。若 SAP 通知客戶特性已可供測試，即會開始進入執行特性驗收測試期間。客戶應開始執行驗收測試程序且不得延遲。 (2) If the Acceptance Tests prove to be successful, Customer will declare acceptance of the Features (or subsets of the Features) without undue delay by signing and submitting to SAP the completed acceptance statement. 若已證明順利完成驗收測試，客戶應簽署已完成驗收聲明並提交給 SAP，以宣告驗收特性 (或特性之子集)，避免發生不必要之延誤。 (3) The Acceptance Tests shall be deemed successful if the Features are materially consistent with the final version of the Product Backlog or the Specification and are free of any defect causing serious interruptions in normal operations (important tasks cannot be performed due to a malfunction or an unavailable function in the respective Features that is urgently required to deal with the current situation (“Material Defects”)). 若特性實質符合產品未交貨項目或規格之最終版本，且並無任何造成正常作業嚴重中斷之缺陷 (個別特性由於必須緊急應付目前狀況而發生故障或功能無法使用，導致無法執行重要工作 (「重大瑕疵」))。 (4) In case it is revealed in the course of the Acceptance Tests that the Features are not materially consistent with the final version of the Product Backlog or the Specification, and/or are not free of Material Defects, Customer may refuse to declare acceptance and shall grant SAP an additional period of time to eliminate deviations from the final version of the Product Backlog or the Specification, and/or Material Defects. The identification of any failure to meet these criteria must include a precise description of the problem and all relevant information that is reasonably required by SAP in order to rework the Features. After expiry of this additional period of time, the Acceptance Test procedure shall be repeated. If the repeated test still reveals deviations from the final version of the Product Backlog or the Specification, and/or Material Defects which legitimate the refusal of the acceptance, then second and third repeat tests shall be carried out on the same basis as the first repeat test. 若於驗收測試執行過程中發現特性未實質符合產品未交貨項目或規格之最終版本，且其中具有重大瑕疵，客戶得拒絕宣告驗收，且應授與 SAP 額外期間排除與產品未交貨項目或規格牴觸之處和/或重大瑕疵。對任何未能符合這些標準的鑑定必須包括一個精確的描述，說明問題所在及為使 SAP 能對特性進行返工所合理要求的所有相關資訊。上述額外期間到期後，應再次執行驗收測試程序。再次執行測試後若仍發現與產品未交貨項目或規格抵觸之處，和/或構成合法拒絕驗收之重大瑕疵，則應比照第一次重覆測試執行第二次與第三次重覆測試。 (5) Customer shall not refuse acceptance of the Features if the applicable Acceptance ...
View SourceView Similar (2)
Acceptance of the Features. Penerimaan Fitur‌ (1) The parties shall agree on Acceptance Test procedures. The period for conducting Acceptance Tests for the Features begins when SAP informs Customer that the Features are available for testing. Customer shall commence the Acceptance Test procedure without delay./ Para pihak harus menyetujui prosedur Uji Penerimaan. Periode untuk melaksanakan Uji Penerimaan untuk Fitur dimulai saat SAP memberitahukan Pelanggan bahwa Fitur tersedia untuk pengujian. Pelanggan akan memulai prosedur Uji Penerimaan tanpa penundaan. (2) If the Acceptance Tests prove to be successful, Customer will declare acceptance of the Features (or subsets of the Features) without undue delay by signing and submitting to SAP the completed acceptance statement./ Jika Uji Penerimaan terbukti berhasil, Pelanggan akan menyatakan penerimaan Fitur (atau subkumpulan Fitur) tanpa penundaan yang tidak semestinya dengan menandatangani dan mengirim pernyataan penerimaan yang telah dilengkapi kepada SAP. (3) The Acceptance Tests shall be deemed successful if the Features are materially consistent with the final version of the Product Backlog or the Specification and are free of any defect causing serious interruptions in normal operations (important tasks cannot be performed due to a malfunction or an unavailable function in the respective Features that is urgently required to deal with the current situation (“Material Defects”)). Uji Penerimaan akan dianggap berhasil jika Fitur sesuai secara materiil dengan versi akhir dari Backlog Produk atau Spesifikasi, serta bebas dari kerusakan yang mengakibatkan gangguan serius dalam pengoperasian normal (tugas-tugas penting tidak dapat dilaksanakan karena malafungsi atau fungsi yang tidak tersedia dalam Fitur terkait yang dibutuhkan secara mendesak untuk menangani situasi terkini (“Kerusakan Materiil”)). (4) In case it is revealed in the course of the Acceptance Tests that the Features are not materially consistent with the final version of the Product Backlog or the Specification, and/or are not free of Material Defects, Customer may refuse to declare acceptance and shall grant SAP an additional period of time to eliminate deviations from the final version of the Product Backlog or the Specification, and/or Material Defects. The identification of any failure to meet these criteria must include a precise description of the problem and all relevant information that is reasonably required by SAP in order to rework the Features. After expiry of t...
View Source

Related to Acceptance of the Features

  • Acceptance of the Work 19.1 No act of, or failure to act by, the Owner or the OWNER'S REPRESENTATIVE during the course of the Work, nor any extension of time for the completion of the Work, shall be regarded as an acceptance of such Work or any part thereof, or of materials used therein, either wholly or in part. Acceptance shall be evidenced only by the Final Payment by the Owner to Contractor. Before any final certificate shall issue, Contractor shall execute an affidavit on the certificate that it accepts the same in full payment and settlement of all claims on account of Work done and materials furnished under this Contract, and that all claims for materials provided or labor performed have been paid or set aside in full. No waiver of any breach of this Contract by the Owner or anyone acting on Owner's behalf shall be held as a waiver of any other subsequent breach thereof. 19.2 Contractor agrees to guarantee all work under this Contract for a period of one year from the date of Final Payment by the Owner or within such longer period of time as may be prescribed by law or by the terms of any applicable special guarantee required under terms of Owner’s conditional acceptance of elements of the Work the Owner deems marginally substandard. If any unsatisfactory condition or damage develops within the time of this guarantee period due to materials or workmanship that are defective, inferior, or not in accordance with the Contract, as reasonably determined by the Owner or the OWNER’S REPRESENTATIVE, then the Contractor shall, when notified by the Owner or OWNER’S REPRESENTATIVE, immediately place such guaranteed Work in a condition satisfactory to the Owner or OWNER’S REPRESENTATIVE. Such guarantee shall be in addition to any implied warranty under law or other manufacturer’s or product supplier’s warranty. The provisions of this Article apply to Work done by Subcontractors as well as to Work done by direct employees of the Contractor, and are in addition to any other remedies or warranties provided by law.

  • Acceptance of the Terms of Use These terms of use are entered into by and between you (“you” or “your”) and Consolidated Planning, Inc. (“Company”, “we”, “us” or “our”). The following terms and conditions, together with any documents expressly incorporated by reference (collectively, the “Terms of Use”), govern your access to and use of the ▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇▇▇▇▇.▇▇▇ website (the “Website”) including any content, functionality, and services offered on or through the Website, whether as a guest or registered user. Please read the Terms of Use carefully before using the Website. By using the Website you accept and agree to be bound and abide by the Terms of Use, including our Privacy Policy (such policy is incorporated herein by reference). If you do not agree to these Terms of Use, you are not authorized to access or use the Website. This Website is offered and available to users who are 18 years of age or older and reside in the United States or any of its territories or possessions By using the Website, you represent and warrant that you are of legal age to form a binding contract with the Company and meet all of the foregoing eligibility requirements. If you do not meet all of these requirements, you must not access or use the Website.

  • Acceptance of Work The completion of the Work shall be subject to acceptance by NYSERDA in writing of all deliverables as defined in Exhibit A, Statement of Work.

  • Acceptance of these Terms Your use of the Services constitutes your acceptance of this Agreement. This Agreement is subject to change from time to time. We will notify you of any material change via secure message through our online banking site or on our website(s) by providing a link to the revised Agreement or other acceptable manner of delivery. Your continued use of the Services will indicate your acceptance of the revised Agreement. Further, SECURITY BANK reserves the right, in its sole discretion, to change, modify, add, or remove portions from the Services. Your continued use of the Services will indicate your acceptance of any such changes to the Services.