Access to Vessel Clause Samples

The Access to Vessel clause grants designated parties, such as inspectors, surveyors, or representatives of regulatory authorities, the right to board and access the vessel for specific purposes. In practice, this clause outlines the conditions under which access is permitted, such as during loading, unloading, or for safety inspections, and may specify requirements for advance notice or compliance with safety protocols. Its core function is to ensure transparency and compliance with contractual or legal obligations by allowing necessary oversight and verification activities on board the vessel.
Access to Vessel. Provide to the Intercreditor Agent and the Technical Consultant reasonable notice of all completion and acceptance tests carried out in respect of its Vessel and the work with respect to its Vessel and, subject to compliance with the terms of the relevant Shipbuilding Contract: (a) use reasonable efforts to procure that the Intercreditor Agent or its authorised representative and the Technical Consultant (the “Representatives”) are given such access to such Vessel as they may require whilst acceptance tests are carried out, on reasonable notice and at reasonable times and for the purposes only of observing such acceptance tests; (b) allow any Representative to inspect the results of the acceptance tests; and (c) allow any Representative to inspect and take copies of any records (including all drawings and specifications), contracts and documents relating to such Vessel, subject to the Representatives complying with health and safety rules and procedures and any reasonable conditions (including, without limitation, the Representatives agreeing to keep confidential any proprietary information).
View SourceView Similar (3)
Access to Vessel. Mortgagor at all reasonable times will afford Mortgagee or its authorized representatives full and complete access to the Vessel for the purpose of inspecting the same and Mortgagor's papers and records with respect thereto.
View SourceView Similar (2)
Access to Vessel. The Mortgagor will permit the Collateral Agent or any agents or representatives thereof from time to time, upon prior reasonable notice, full and complete access to the Vessel for the purpose of inspecting the Vessel and her papers and, at the reasonable request of the Collateral Agent, the Mortgagor will deliver for inspection copies of any and all contracts and documents relating to the Vessel, whether on board or not.
View Source
Access to Vessel. The Shipowner shall use all reasonable endeavors to afford the Mortgagee and such Persons as the Mortgagee shall from time to time appoint for that purpose full and complete access to the Vessel at any time, on reasonable notice and in a manner which shall not interfere with the Vessel's trading requirements to view the state and condition thereof and her cargo and papers and to ascertain whether the Vessel is being properly repaired and maintained, and if default shall be made in keeping her in such good state of repair and in such working order and condition as herein mentioned (without prejudice however to any of the Mortgagee's rights under this Mortgage) the Mortgagee may (but shall not be obligated to) effect such repairs as shall in its opinion be necessary, and the Shipowner shall on demand repay to the Mortgagee every sum of money expended for the above purpose with interest at the Default Rate.
View Source

Related to Access to Vessel

  • Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing. If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law clauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to read as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. Agreed In the event of litigation or use of any dispute resolution model when resolving disputes with a TIPS member entity as a result of a transaction between the vendor and TIPS or the TIPS member entity, the Venue for any litigation or other agreed upon model shall be in the state and county where the customer resides unless otherwise agreed by the parties at the time the dispute resolution model is decided by the parties. Agreed Texas and other states restrict by law or state Constitution the ability of a governmental entity to indemnify others. TIPS requires that any contract entered into between a vendor and TIPS or a TIPS Member as a result of an award under this Solicitation limit the requirement that the Customer indemnify the Vendor by either eliminating any such indemnity requirement clauses in any agreements, contracts or other binding documents OR by prefacing all indemnity clauses required of TIPS or the TIPS Member entity with the following: "To the extent permitted by the laws or the Constitution of the state where the customer resides, ". Agreed

  • Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing.

  • Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID: 2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises; 2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID; 2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or 2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis. 2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored. 2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors. 2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures. 2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.

  • Access to Facility 13.1 Each Party shall ensure that its facilities are secured at all times. 13.2 The Customer shall permit and, if the land on which the Facility is located is not owned by Customer, cause such landowner to permit, the Distributor's employees and agents to enter the property on which the Facility is located at any reasonable time. Such access shall be provided for the purposes of inspecting and/or testing the Facility as and when permitted by this Agreement, the Code or the Distributor’s Conditions of Service or as required to ensure the continued safe and satisfactory operation of the Facility, to ensure the accuracy of the Distributor's meters, to establish work protection, or to perform work. 13.3 Any inspecting and/or testing referred to in section 13.2 shall not relieve the Customer from its obligation to operate and maintain the Facility and any related equipment in a safe and satisfactory operating condition and in accordance with this Agreement. 13.4 The Distributor shall have the right to witness any testing done by the Customer of the Facility and, to that end, the Customer shall provide the Distributor with at least fifteen working days advance notice of the testing. 13.5 Notwithstanding section 10.1, where the Distributor causes damage to the Customer's property as part of this access, the Distributor shall pay to the Customer the Customer's reasonable costs of repairing such property or, if such property cannot be repaired, replacing such property. 13.6 Notwithstanding section 10.1, if the Customer has been given access to the Distributor’s property, and if the Customer causes damage to the Distributor’s property as part of that access, the Customer shall pay to the Distributor the Distributor’s reasonable costs of repairing such property or, if such property cannot be repaired, replacing such property.

  • Access to Site 3.05.1 Contractor may enter and leave the premises at all reasonable times without charge. Contractor and its employees may use the common areas and roadways of the premises where it is to perform the services together with all facilities, equipment, improvements, and services provided in connection with the premises for common use. This excludes parking for Contractor’s personnel. Contractor shall repair any damage caused by it or its employees as a result of its use of the common areas.