Ambient temperature Sample Clauses
The 'Ambient temperature' clause defines the acceptable range of environmental temperatures in which certain equipment, products, or operations must function or be stored. Typically, this clause specifies minimum and maximum temperature thresholds, ensuring that all parties are aware of the conditions required for optimal performance or preservation. For example, it may state that electronic devices must operate reliably between 0°C and 40°C. The core purpose of this clause is to allocate responsibility and mitigate risks associated with temperature-related failures or damages, ensuring clarity about environmental requirements.
POPULAR SAMPLE Copied 1 times
Ambient temperature. For the measurement of electrical and photometric characteristics, the headlamp shall be operated in dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the front fog lamp shall be operated in dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the device shall be operated in a dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. The ambient temperature shall be between 0 °C and 40 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the AFS shall be operated in a dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For tests requested by ▇▇▇▇▇ (and not for any CAISO‑initiated test, which shall occur when directed by ▇▇▇▇▇), the average ambient temperature, based on an aggregate of 1-minute resolution data collected throughout the SCT, must be within the range of 8 – 33 degrees Celsius.
Ambient temperature. 4.2.1 System Normal Extreme DMS-MTX/NT Cell Site 50 to 86 deg. F 41 to 120 deg. F Conditions above or below the normal tolerance for more than 72 consecutive hours and 15 days maximum per year are considered extreme. The rate of change shall not exceed 15 degrees F per hour. Ambient Temperature is measured at a point 5 feet above floor level and either mid-aisle or 15" in front of the equipment, whichever is less.
4.2.2 Storage Ambient Temperature: -40 to 160 deg. F.
Ambient temperature. Ratings should be based on the ambient conditions as defined in Appendix A to this procedure.
Ambient temperature. The temperature of the surrounding air. For testing purposes, ambient temperature must be between 16 °C (50 °F) and 38 °C (100 °F).
Ambient temperature. Measure ambient temperature at the beginning and end of each day’s paving operation.