Annex 4 Sample Clauses

Annex 4. The information described herein is as of the Computation Date and, except as otherwise indicated below, pertains to the Relevant Period.

Annex 4. The corrections given in Table 4.8 take account of the fact that the protection ratio is a function of the frequency difference between the interfering signal and the wanted telelvision signal. To account for this effect, the effective radiated power, in dBW, shall be reduced by this correction before the coordination distance is determined. A value of 0 dB shall be used when the corrected effective radiated power, in dBW, is negative. Linear interpolation shall be used for effective radiated powers, in dBW, differing from those given in the tables and also for effective antenna heights (m) other than those in Tables 4.1 to 4.3. Antenna heights of 10 m or 1800 m, respectively, shall be used when the actual height is below the former or above the latter value. For mixed paths the coordination distance, DM, shall be the sum of the pertinent fractions of the coordination distances, Di, applicable to every type of propagation path involved. where DM = ∑ di Di i T (i = L, SC, SW ) dT is the total path length from the transmitter to the nearest point on the border of the country concerned; di is the total length of those parts of the path which are over land, over cold sea, over warm sea as the case may be. Coordination distances, DL, in km, for propagation paths over land Effective antenna height (m) Effective radiated power 10 37.5 75 150 300 600 1200 1800 dBW W Coordination distances (km) 55 300k 660 660 670 690 710 740 780 810 50 100k 600 600 620 630 650 680 720 760 45 30k 550 550 560 580 600 630 670 700 40 10k 500 500 510 520 540 570 610 650 35 3k 440 440 450 470 490 520 560 590 30 1k 390 390 400 410 430 460 500 530 25 300 330 330 340 360 370 410 450 480 20 100 280 280 290 300 320 360 390 430 15 30 200 230 240 250 270 300 340 380 10 10 110 170 190 200 220 260 300 330 5 3 60 130 150 160 180 210 260 280 0 1 45 90 110 120 140 170 220 240 Annex 4 – 60 – Coordination distances, DSC, in km, for propagation paths over cold sea Effective antenna height (m) Effective radiated power 10 37.5 75 150 300 600 1200 1800 dBW W Coordination distances (km) 55 300k 1160 1160 1190 1220 1240 1250 1270 1300 50 100k 990 990 1000 1040 1050 1070 1130 1160 45 30k 860 860 870 890 910 940 980 1010 40 10k 750 750 760 780 800 840 870 910 35 3k 640 640 660 680 700 730 780 810 30 1k 560 560 580 590 610 640 700 720 25 300 480 480 500 510 530 570 610 640 20 100 410 410 430 440 470 500 540 570 15 30 350 350 370 380 400 440 480 510 10 10 300 300 310 320 350 380 420 450 5 3 230 240 260 270 290...

Annex 4. 6.6 identifies (i) any off-balance sheet arrangements with respect to each of the Company and DYNA GmbH, and (ii) any disputes between any of the Company, DYNA GmbH or, to Sellers’ Knowledge, any of the Operating Subsidiaries and its respective auditors.

Annex 4. Paragraphs 1.1.1. and 1.1.1.1., amend to read: 1.1.1. Test procedure 1/ The headlamp shall be operated for a period according to the specified time, so that: (a) In the case where only one lighting function (driving or passing beam or front fog lamp) is to be approved, the corresponding filament is lit for the prescribed time, 2/ (b) In the case of a headlamp with a passing beam and one or more driving beams or in case of a headlamp with a passing beam and a front fog lamp: (i) the headlamp shall be subjected to the following cycle until the time specified is reached: 15 minutes, passing-beam filament lit; 5 minutes, all filaments lit. (ii) if the applicant declares that the headlamp is to be used with only the passing beam lit or only the driving beam(s) lit 3/ at a time, the test shall be carried out in accordance with this condition, activating 2/ successively the passing beam half of the time and the driving beam(s) (simultaneously) for half the time specified in paragraph 1.1. above. (c) in the case of a headlamp with a front fog lamp and one or more driving beams: (i) the headlamp shall be subjected to the following cycle until the time specified is reached: 15 minutes, front fog lamp lit; 5 minutes, all filaments lit. (ii) if the applicant declares that the headlamp is to be used with only the front fog lamp lit or only the driving beam(s) lit 3/ at a time, the test shall be carried out in accordance with this condition, activating 2/ successively the front fog lamp half of the time and the driving beam(s) (simultaneously) for half the time specified in paragraph 1.1. above. (d) In the case of headlamp with a passing beam, one or more driving beams and a front fog lamp: (i) the headlamp shall be subjected to the following cycle until the time specified is reached: 15 minutes, passing-beam filament lit; 5 minutes, all filaments lit. (ii) if the applicant declares that the headlamp is to be used with only the passing beam lit or only the driving beam(s) 3/ lit at a time, the test shall be carried out in accordance with this condition, activating 2/ successively the passing beam half of the time and the driving beam(s) for half the time specified in paragraph 1.1. above, while the front fog lamp is subjected to a cycle of 15 minutes off and 5 minutes lit for half of the time and during the operation of the driving beam; (iii) if the applicant declares that the headlamp is to be used with only the passing beam lit or only the front fog lamp 3/ lit at a ...

Annex 4. 02(p) to the Sale Agreement is hereby amended by deleting the Minimum Fixed Charge Coverage Ratio covenant in paragraph (a) thereof in its entirety and replacing said covenant with the following:

Annex 4. 5.1 contains a complete and correct list of patents, trade marks and other registered intellectual property rights and internet domain names owned or used in connection with the operation of the Business by the Company as of the Signing Date (the “Intellectual Property Rights”).

Annex 4. 8.1 contains, as of the Signing Date, a complete and correct list of collective bargaining and material agreements with unions, workers’ councils and similar organisations by which the Company, as of the Signing Date, is bound.

Annex 4. 9 contains a complete and correct list of all insurance policies of the Company and/or for the benefit of the Company. To the Seller’s Knowledge, the Company has not received written notice from any third party that the insurance policies listed in Annex 4.9 are not valid and in full force or that any premiums due under the above policies have not been duly paid up to the Signing Date. To the Seller’s Knowledge, there are no circumstances due to which any such policy may be voidable.

Annex 4. 22 contains a full list of all employees that shall be employed by the Company at Closing Date. None of these employees has terminated its employment contract or has given notice of termination or has indicated to Company or Sellers any intention to terminate its employment contract. Except for those employees listed on ANNEX 4.22, there do not exist as per Closing Date and thereafter any other employment contracts between the Company and any employees or quasi employees (Scheinselbstandige).