ASSEMBLY AND TESTING Clause Samples

The ASSEMBLY AND TESTING clause outlines the requirements and procedures for assembling and testing products or components before delivery or acceptance. It typically specifies the standards to be followed during assembly, the types of tests to be conducted, and the responsibilities of each party in ensuring that the final product meets agreed-upon specifications. For example, it may require the supplier to perform quality checks or provide test reports prior to shipment. This clause ensures that products are properly assembled and function as intended, thereby reducing the risk of defects and disputes over product quality.
POPULAR SAMPLE Copied 1 times
ASSEMBLY AND TESTING. Our equipment manufacturing operations consist of assembly of subsystems into final configuration and final testing in a cleanroom prior to customer shipment. We fabricate certain custom plastic components that are incorporated into our systems, and also procure subsystems and materials from a number of distributors and multiple outside suppliers. We have multiple suppliers for plastic, our main raw material requirement. Our principal suppliers are Advance Micropolish for gas mixing components, multiple plastics suppliers such as Port Plastics, Valin, Beco, Sunnyvale Valve, Fluoroware for valves and other components, Qualtronix for electrical assemblies, Stev▇▇ ▇▇▇ineering for mechanical assemblies, and Delta Diversified and Expedite Precision for plastic shells. Our strategic goal is to continue to use contract manufacturers for our standard subsystems as manufacturing volume increases and product designs mature. We do not have written contracts with our suppliers and choose suppliers based on considerations of quality, cost and delivery time. PRODUCT DEVELOPMENT We incurred research and development expenses of $2,749,925 in 1998 and $2,021,790 in 1997. Research and development expenses represent costs incurred for the design and development of new products, the 5 6 redesign of existing products, and the costs associated with technology development. None of our research and development costs in 1998 and 1997 were paid for by customers, or other outside organizations. The market for semiconductor fabrication equipment is characterized by rapid technological advancement and product innovation. We believe that development of new products will be required to allow us to compete effectively in the market. As of December 31, 1998, we had 20 full-time employees whose duties included research and development. We intend to hire additional research and development personnel in 1999. We have established an advanced applications laboratory complete with a Class 1 cleanroom and measurement and test equipment to assist in the development of our processes and products, perform customer demonstrations and evaluations, and assure the quality of products shipped to customers. We intend to continue our research and development activities through internal research and cooperative research relationships with customers and other technology companies. We intend to continue product enhancement programs focusing on improving reliability and performance, developing additional feat...
View Source
ASSEMBLY AND TESTING. We will: 1. provide initial training for your personnel, as we specify in our assembly and testing processes included in the Operations Guide; and 2. certify each of your Authorized Locations upon your establishing their compliance with (a) our assembly, testing, and associated processes, (including handling of any Program or return of Components or ISUs), and (b) maintaining the minimum number of trained personnel we specify. You agree to: 1. assemble and test Approved Products using new or used ISUs and Components provided by us under the terms of this Attachment. You may not assemble Approved Products using ISUs or Components that were used by you in any manner or were acquired from any other source, including a trade-in. An Approved Product returned to you must be treated as a used machine unless you can establish that the Approved Product had not been installed; 2. ship-only Approved Products in the original IBM Incomplete System unit packaging;
View Source
ASSEMBLY AND TESTING. Unless otherwise agreed in writing, assembly and testing of the supplied goods at the Customer or end customer’s facility will take place at the Customer’s expense. Where expressly provided for in the Contract, the Supplier guarantees to provide technical assistance for assembly and testing through its specialized staff, with costs borne by the Customer according to the rates provided for by the ANIE tables in force at the moment of the goods’ arrival.
View Source
ASSEMBLY AND TESTING. We will: 1. provide initial training for your personnel. as we specify, in our assembly and testing processes included in the Operations Guide; and 2. certify each of your Authorized Locations upon your establishing their compliance with (a) our assembly and testing processes, (handling of any Program or return of Components or ISUs), and (b) the minimum number of trained personnel we specify. You agree to: 1. assemble and test Approved Products using new or used ISUs and Components provided by us under the terms of this Attachment. You may not assemble Approved Products, for example, using ISUs or Components that were used by you in any manner or were acquired from any other source, including a trade-in (an Approved Product returned to you must be treated as a used machine unless you can establish that the Approved Product has not been installed);
View Source
ASSEMBLY AND TESTING. (a) IBM's Responsibilities. IBM will provide initial training for your personnel in the IBM assembly and testing processes described in Appendix A and Appendix B. IBM must certify your initial compliance with the assembly and test processes, including your handling of any Returned Parts, Software Images, Test Software and Other Software, at each location before You will be authorized by IBM to assemble and test Approved Products under this Agreement at such location.
View Source
ASSEMBLY AND TESTING. Inspection procedures shall be in accordance with the approved Inspection and Test Plan (ITP) and as required by specific codes (described in the attached specifications). A copy of inspection and test reports for materials used shall be forwarded to LGL as required by the specifications. Components that require separate shipment (ie additional connections, gaskets, etc.) must be packaged suitably for export shipment, shall be properly marked, in accordance with LGL shipping and packaging specifications.
View Source
ASSEMBLY AND TESTING 
View Source

Related to ASSEMBLY AND TESTING

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Audit and Testing 4.1 The Contractor shall conduct tests of the processes and countermeasures contained in the Security Plan ("Security Tests") on an annual basis or as otherwise agreed by the Parties. The date, timing, content and conduct of such Security Tests shall be agreed in advance with the Authority. 4.2 The Authority shall be entitled to send a representative to witness the conduct of the Security Tests. The Contractor shall provide the Authority with the results of such tests (in a form approved by the Authority in advance) as soon as practicable after completion of each Security Test. 4.3 Without prejudice to any other right of audit or access granted to the Authority pursuant to this Contract, the Authority shall be entitled at any time and without giving notice to the Contractor to carry out such tests (including penetration tests) as it may deem necessary in relation to the Security Plan and the Contractor's compliance with and implementation of the Security Plan. The Authority may notify the Contractor of the results of such tests after completion of each such test. Security Tests shall be designed and implemented so as to minimise the impact on the delivery Services. If such tests impact adversely on its ability to deliver the Services to the agreed Service Levels, the Contractor shall be granted relief against any resultant under-performance for the period of the tests. 4.4 Where any Security Test carried out pursuant to paragraphs 4.2 or 4.3 above reveals any actual or potential security failure or weaknesses, the Contractor shall promptly notify the Authority of any changes to the Security Plan (and the implementation thereof) which the Contractor proposes to make in order to correct such failure or weakness. Subject to the Authority's approval in accordance with paragraph 3.12, the Contractor shall implement such changes to the Security Plan in accordance with the timetable agreed with the Authority or, otherwise, as soon as reasonably possible. For the avoidance of doubt, where the change to the Security Plan to address a non-compliance with the Security Policy or security requirements, the change to the Security Plan shall be at no additional cost to the Authority. For the purposes of this paragraph 4, a weakness means a vulnerability in security and a potential security failure means a possible breach of the Security Plan or security requirements.

  • Drug Testing (A) The state and the PBA agree to drug testing of employees in accordance with section 112.0455, F.S., the Drug-Free Workplace Act. (B) All classes covered by this Agreement are designated special risk classes for drug testing purposes. Special risk means employees who are required as a condition of employment to be certified under Chapter 633 or Chapter 943, F.S. (C) An employee shall have the right to grieve any disciplinary action taken under section 112.0455, the Drug-Free Workplace Act, subject to the limitations on the grievability of disciplinary actions in Article 10. If an employee is not disciplined but is denied a demotion, reassignment, or promotion as a result of a positive confirmed drug test, the employee shall have the right to grieve such action in accordance with Article 6.

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).