BECOMING OPERATIONAL Sample Clauses

The 'Becoming Operational' clause defines the point at which a project, system, or facility is considered fully functional and ready for use. Typically, this clause outlines the specific criteria or tests that must be met, such as successful completion of commissioning procedures or achievement of performance benchmarks. By clearly establishing when operational status is achieved, the clause helps determine when responsibilities, warranties, or payment obligations commence, ensuring clarity and reducing disputes between parties.
BECOMING OPERATIONAL. 7.1 If directly connected to the NGC GB Transmission System NGC shall connect and Energise the User's Equipment at the Connection Site during the course of and in accordance with the Commissioning Programme and thereafter upon compliance by the User with the provisions of Clause 5 and provided (1) the NGC Construction Works excluding the Seven Year Statement Works shall be Commissioned and (2) the Seven Year Statement Works and Third Party Works shall be completed NGC shall forthwith notify the User in writing that the Connection Site shall become Operational. 7.2 If Embedded upon compliance by the User with the provisions of Clauses 5.1, 5.2 and 5.3 and subject, if NGC so requires, to the NGC Transmission Reinforcement Works [and/or works for the Modification] being carried out and/or the [New] Connection Site being Operational (any or all as appropriate) NGC shall forthwith notify the User ("Operational Notification") in writing that it has the right to use the NGC GB Transmission System. It is an express condition of this Construction Agreement that in no circumstances, will the User use or operate the User's Equipment without receiving the Operational Notification from NGC. 7.3 If, on completion of the User's Works in accordance with the terms of this Construction Agreement the Registered Capacity of the User's Equipment is less than [ ]MW, NGC shall automatically have the right to amend Clause 7 and Appendix C to the Bilateral Connection Agreement to reflect the actual Registered Capacity of the User's Equipment.
View SourceView Similar (4)
BECOMING OPERATIONAL. 7.1 If directly connected to the National Electricity Transmission System The Company shall connect and Energise the User's Equipment at the Connection Site during the course of and in accordance with the Commissioning Programme and thereafter upon compliance by the User with the provisions of Clause 5 and provided (1) the Construction Works excluding the Seven Year Statement Works [delete Seven Year Statement Works under the Connect and Manage Arrangements if these are not Enabling Works] shall be Commissioned and (2) [the Seven Year Statement Works and Third Party Works shall be completed The Company shall forthwith notify the User in writing that the Connection Site shall become Operational.] or 7.2 If Embedded upon compliance by the User with the provisions of Clauses 5.1, 5.2 and 5.3 and subject, if The Company so requires, to the Enabling Works [and/or works for the Modification] being carried out and/or the [New] Connection Site being Operational (any or all as appropriate) The Company shall forthwith notify the User ("Operational Notification") in writing that it has the right to use the National Electricity Transmission System. It is an express condition of this Construction Agreement that in no circumstances, will the User use or operate the User's Equipment without receiving the Operational Notification from The Company.] 7.3 If, on completion of the User's Works in accordance with the terms of this Construction Agreement the Registered Capacity of the User's Equipment is less than [ ]MW, The Company shall automatically have the right to amend Clause 7 and Appendix C to the Bilateral Connection Agreement to reflect the actual Registered Capacity of the User's Equipment.
View SourceView Similar (2)
BECOMING OPERATIONAL. 7.1 The Company shall connect and Energise the User's Equipment at the Connection Site during the course of and in accordance with the Commissioning Programme and thereafter upon compliance by the User with the provisions of Clause 5 and provided (1) the Construction Works excluding the Seven Year Statement Works shall be Commissioned and (2) [the Seven Year Statement Works and Third Party Works shall be completed The Company shall forthwith notify the User in writing that the Connection Site shall become Operational.
View SourceView Similar (2)
BECOMING OPERATIONAL. 7.1 If directly connected to the GB Transmission System The Company shall connect and Energise the User's Equipment at the Connection Site during the course of and in accordance with the Commissioning Programme and thereafter upon compliance by the User with the provisions of Clause 5 and provided (1) the Construction Works excluding the Seven Year Statement Works shall be Commissioned and (2) the Seven Year Statement Works and Third Party Works shall be completed The Company shall forthwith notify the User in writing that the Connection Site shall become Operational. 7.2 If Embedded upon compliance by the User with the provisions of Clauses 5.1, 5.2 and 5.3 and subject, if The Company so requires, to the Transmission Reinforcement Works [and/or works for the Modification] being carried out and/or the [New] Connection Site being Operational (any or all as appropriate) The Company shall forthwith notify the User ("Operational Notification") in writing that it has the right to use the GB Transmission System. It is an express condition of this Construction Agreement that in no circumstances, will the User use or operate the User's Equipment without receiving the Operational Notification from The Company.
View Source

Related to BECOMING OPERATIONAL

  • Co-operation Each Party acknowledges that this ESA must be approved by the Department and agree that they shall use Commercially Reasonable efforts to cooperate in seeking to secure such approval.

  • Operational Control Directing the operation of the Transmission Facilities Under ISO Operational Control to maintain these facilities in a reliable state, as defined by the Reliability Rules. The ISO shall approve operational decisions concerning these facilities, made by each Transmission Owner before the Transmission Owner implements those decisions. In accordance with ISO Procedures, the ISO shall direct each Transmission Owner to take certain actions to restore the system to the Normal State. Operational Control includes security monitoring, adjustment of generation and transmission resources, coordination and approval of changes in transmission status for maintenance, determination of changes in transmission status for reliability, coordination with other Control Areas, voltage reductions and Load Shedding, except that each Transmission Owner continues to physically operate and maintain its facilities.

  • Processing operations The personal data transferred will be subject to the following basic processing activities (please specify):

  • Committee Operation a. The committee shall be chaired jointly by a committee member from the Association and a committee member appointed by the Superintendent and/or his/her designee. b. Members of the committee shall receive training in all aspects of OTES, the state adopted evaluation framework, the standards for the teaching profession, teacher of record, shared attribution, and teacher-student data linkage prior to service on the committee. c. The committee shall establish, by mutual agreement, a meeting calendar, tasks for the committee to complete, and timelines for the completion of specific tasks. d. Committee agendas shall be developed jointly by the co-chairpersons of the committee. e. All decisions of the committee shall be achieved by consensus. f. At the initial committee meeting, the committee will develop the ground rules by which the committee will operate. These ground rules will be read aloud at the commencement of every meeting and will be reviewed annually. g. At each meeting, the committee shall select an individual to act as the official scribe for that meeting. h. Members of the committee shall receive release time for committee work and training. i. Minutes of meetings shall be distributed to committee members, SSLTA President, and District Superintendent within seven (7) days following meetings of the committee. j. The committee may establish sub-committees to assist with their work. k. Sub-committees shall be jointly appointed by the Superintendent/designee and the Association President/designee. l. The committee shall be authorized to utilize a consultant(s) (examples include, but are not limited to, educational consultants, software consultants, credentialing trainers, etc.) as it deems appropriate. The cost, if any, shall be borne by the Board.

  • Ongoing Operations From the Effective Date through Closing: