Caged Collocation Clause Samples

A Caged Collocation clause defines the specific location within a facility or data center where a tenant is provided with a physically separated, secure area—often enclosed by cages—for housing their equipment. This clause typically outlines the boundaries of the caged space, access rights, and any restrictions on modifications or use of the area. By clearly specifying these terms, the clause ensures both security for the tenant’s equipment and clarity regarding the responsibilities and rights of both the facility operator and the tenant.
Caged Collocation. CBT shall permit CLEC to collocate CLEC’s equipment and facilities and to require the construction of a cage or similar structure surrounding the collocation space.
View SourceView Similar (17)
Caged Collocation. 3.2.1 BellSouth will make caged Collocation Space in Central Offices available in fifty
View SourceView Similar (5)
Caged Collocation. 3.2.1 At ACCESS Integrated’s option and expense, ACCESS Integrated may arrange with a Supplier certified by BellSouth (BellSouth Certified Supplier) to construct a collocation arrangement enclosure, where technically feasible as that term has been defined by the FCC, in accordance with BellSouth’s specifications for a wire mesh enclosure prior to starting equipment installation. Where local building codes require enclosure specifications more stringent than BellSouth’s wire mesh enclosure specifications, ACCESS Integrated and ACCESS Integrated’s BellSouth Certified Supplier must comply with the more stringent local building code requirements. ACCESS Integrated’s BellSouth Certified Supplier shall be responsible for filing and obtaining any and all necessary permits and/or licenses for such construction. BellSouth or BellSouth’s designated agent or contractor shall provide, at ACCESS Integrated’s expense, documentation, which may include existing building architectural drawings, enclosure drawings, and specifications etc., necessary for ACCESS Integrated’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. ACCESS Integrated’s BellSouth Certified Supplier shall ▇▇▇▇ ACCESS Integrated directly for all work performed for ACCESS Integrated pursuant to this Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by ACCESS Integrated’s BellSouth Certified Supplier. ACCESS Integrated must provide the local BellSouth Remote Site Location contact with two (2) Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access ACCESS Integrated’s locked enclosure prior to notifying ACCESS Integrated at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to ACCESS Integrated’s Remote Site Location is required. Upon request, BellSouth shall construct the enclosure for ACCESS Integrated. 3.2.2 BellSouth may elect to review ACCESS Integrated’s plans and specifications, if ACCESS Integrated has indicated its desire to have ACCESS Integrated’s BellSouth Certified Supplier construct the collocation arrangement enclosure, prior to allowing the construction to start, to ensure ACCESS Integrated’s compliance with BellSouth’s wire mesh enclosure specifications. BellSouth will notify ACCESS Integrated of its desire to execute this review in BellSouth’s Application Response to ACCESS Integrated’s application. The Application Response...
View SourceView Similar (4)
Caged Collocation. The Caged Collocation option provides the Collocator with an individual enclosure (not including a top). This enclosure is an area designated by AT&T-13STATE within an Eligible Structure to be used by the Collocator for the sole purpose of installing, maintaining and operating the Collocator- provided equipment.
View SourceView Similar (3)
Caged Collocation. 21.6.1.1 When Collocator constructs its own cage and related equipment, the Collocator will be subject to the AC Circuit Placement charge, which includes four inch (4”) conduit and wiring from the electrical panel to cage as set forth in the Collocation Rate Summary. This is expressed as a non-recurring charge per square foot of floor space requested.
View Source
Caged Collocation. AT&T will make caged Collocation Space in Central Offices available in fifty (50) square foot increments. At CLEC’s option and expense, CLEC will arrange with a Supplier certified by AT&T (AT&T Certified Supplier) to construct a collocation arrangement enclosure in accordance with AT&T’s specifications for a wire mesh enclosure prior to starting equipment installation. Where local building codes require enclosure specifications more stringent than AT&T’s wire mesh enclosure specifications, CLEC and CLEC’s AT&T Certified Supplier must comply with the more stringent local building code requirements. CLEC’s AT&T Certified Supplier shall be responsible for filing and obtaining any and all necessary permits and/or licenses for such construction. AT&T or AT&T’s designated agent or contractor shall provide, at CLEC’s expense, documentation, which may include existing building architectural drawings, enclosure drawings, specifications, etc., necessary for CLEC’s AT&T Certified Supplier to obtain all necessary permits and/or other licenses. CLEC’s AT&T Certified Supplier shall ▇▇▇▇ ▇▇▇▇ directly for all work performed for CLEC. AT&T shall have no liability for, nor responsibility to pay, such charges imposed by CLEC’s AT&T Certified Supplier. CLEC must provide the local AT&T Central Office Building Contact with two (2) Access Keys that will allow entry into the locked enclosure. Except in the case of an emergency, AT&T will not access CLEC’s locked enclosure prior to notifying CLEC at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to CLEC’s Collocation Space is required. Upon request, AT&T shall construct the enclosure for CLEC.
View Source
Caged Collocation. 21.6.1.1 When Wireless Collocator constructs its own cage and related equipment, the Wireless Collocator will be subject to the AC Circuit Placement charge, which includes four inch (4”) conduit and wiring from the electrical panel to cage as set forth in the Collocation Rate Summary. This is expressed as a non-recurring charge per square foot of floor space requested.
View Source

Related to Caged Collocation

  • Collocation Interconnection may be accomplished through the Collocation arrangements offered by CenturyLink. The terms and conditions under which Collocation will be available are described in Article IX of this Agreement.

  • The Site The site of the Project Highway (the “Site”) shall comprise the site described in Schedule-A in respect of which the Right of Way shall be provided by the Authority to the Contractor. The Authority shall be responsible for: (a) acquiring and providing Right of Way on the Site in accordance with the alignment finalised by the Authority, free from all encroachments and encumbrances, and free access thereto for the execution of this Agreement; and (b) obtaining licences and permits for environment clearance for the Project Highway.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If WCS chooses to subtend a Verizon access Tandem, WCS’s NPA/NXX must be assigned by WCS to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 WCS shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from WCS’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office WCS utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow WCS’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Transit Traffic 7.2.2.3.1 CenturyLink will accept traffic originated by CLEC’s network and/or its end user(s) for termination to other Telecommunications Carrier’s network and/or its end users that is connected to CenturyLink's Switch. CenturyLink will also terminate traffic from these other Telecommunications Carriers’ network and/or its end users to CLEC’s network and/or its end users. For purposes of the Agreement, transit traffic does not include traffic carried by Interexchange Carriers. That traffic is defined as Jointly Provided Switched Access. 7.2.2.3.2 The Parties involved in transporting transit traffic will deliver calls to each involved network with CCS/SS7 protocol and the appropriate ISUP/TCAP messages to facilitate full Interoperability and Billing functions. 7.2.2.3.3 The originating company is responsible for payment of appropriate rates to the transit company and to the terminating company. The Parties agree to enter into traffic exchange agreements with third party Telecommunications Carriers prior to delivering traffic to be transited to third party Telecommunications Carriers. In the event one Party originates traffic that transits the second Party’s network to reach a third party Telecommunications Carrier with whom the originating Party does not have a traffic exchange agreement, then the originating Party will indemnify, defend and hold harmless the second Party against any and all charges levied by such third party Telecommunications Carrier, including any termination charges related to such traffic and any attorneys fees and expenses. In the case of IntraLATA LEC Toll traffic where CenturyLink is the designated IntraLATA Toll provider for existing LECs, CenturyLink will be responsible for payment of appropriate usage rates. 7.2.2.3.4 When CenturyLink receives an unqueried call from CLEC to a telephone number that has been ported to another local services provider, the transit rate will apply in addition to any query rates. 7.2.2.3.5 In the case of a transit call that terminates in the Local Calling Area but in a different state than the call originated, and the CLEC does not have an agreement with CenturyLink in the state where the transit call terminated, CLEC must execute an agreement for that state if it is a state served by CenturyLink. In the absence of a second agreement, the transit rate in Exhibit A of this Agreement will be billed to the CLEC.

  • Porcupine Site Highway 11 and the City of Timmins Thunder Bay and District Toronto/York-Peel